Bugger...
Have you tried going back to an earlier version of MSI AB? 2.2.1 should work irregardless.
Topic: How do I change memclock? (Read 1106 times)
ragingazn, try this that I suggested in your PM:
http://www.sendspace.com/file/r7jys0
You will need to restart after it finishes.
http://www.sendspace.com/file/r7jys0
You will need to restart after it finishes.
Doesn't work for me
ragingazn, try this that I suggested in your PM:
http://www.sendspace.com/file/r7jys0
You will need to restart after it finishes.
http://www.sendspace.com/file/r7jys0
You will need to restart after it finishes.
Did you read all the way down on that thread? https://bitcointalksearch.org/topic/m.1137780
Yup... did everything...
12.8 catalyst
2.2.3 MSI AB with DLL
edited config file in MSI AB
Bars not showing up. Can't change anything in AB
you delete the 2 file in the profile folder?
Yes
Did you read all the way down on that thread? https://bitcointalksearch.org/topic/m.1137780
Yup... did everything...
12.8 catalyst
2.2.3 MSI AB with DLL
edited config file in MSI AB
Bars not showing up. Can't change anything in AB
you delete the 2 file in the profile folder?
Did you read all the way down on that thread? https://bitcointalksearch.org/topic/m.1137780
Yup... did everything...
12.8 catalyst
2.2.3 MSI AB with DLL
edited config file in MSI AB
Bars not showing up. Can't change anything in AB
Did you read all the way down on that thread? https://bitcointalksearch.org/topic/m.1137780
When asking these questions, you need to give a little more information. What cards? OS? driver?
Ah right 7970s / W7 / Catalyst 12.2
First, I'd update to 12.8.
Second, CGMiner can only clock the memory 150MH/s below whatever the core is running at. My 7970 runs at a core:1180, so CGMiner can only clock the mem to 1030.
However, MSI AB can be tweaked to lower your memory to whatever you want. You need MSI AB 2.2.3, but you need a DLL file from 2.2.1. See this thread for more information. I run my 7970 at core:1189 and mem:375. I could go lower, but I lose hashrate if I go to low on the mem.
file is removed. Do you mind reuploading?
Nvm I downloaded from here
here is the 12.4 dll if anyone needs it, took me forever to find it
http://www.multiupload.nl/0BWAFN4UGM
Why does my first card crash (don't even have a monitor installed) when I lower memclock?
edit 2:
I think 12.8 fixed it but I cannot lower memclock below 685 in MSI Burner. When I set in config to = 2 the bars disappears. Yes I did put the dll file in there ;/
edit 3:
wait it's still at 1375 fml ...
When asking these questions, you need to give a little more information. What cards? OS? driver?
Ah right 7970s / W7 / Catalyst 12.2
First, I'd update to 12.8.
Second, CGMiner can only clock the memory 150MH/s below whatever the core is running at. My 7970 runs at a core:1180, so CGMiner can only clock the mem to 1030.
However, MSI AB can be tweaked to lower your memory to whatever you want. You need MSI AB 2.2.3, but you need a DLL file from 2.2.1. See this thread for more information. I run my 7970 at core:1189 and mem:375. I could go lower, but I lose hashrate if I go to low on the mem.
When asking these questions, you need to give a little more information. What cards? OS? driver?
Ah right
7970s / W7 / Catalyst 12.2
When asking these questions, you need to give a little more information. What cards? OS? driver?
I tried to change memclock in CGminer but it doesn't seem to change it. I also tried MSI Afterburner but that doesn't work either.
7970s / W7 / Catalyst 12.2
7970s / W7 / Catalyst 12.2
Jump to: