Author

Topic: How many Megabytes does an Antminer consume monthly? (Read 10471 times)

donator
Activity: 55
Merit: 3
the internet never sleeps
according to this old thread https://bitcointalksearch.org/topic/how-much-bandwidth-does-mining-take-10860, the usage is very low around 2mb per hour, you can build a huge farm and still consume very low

bandwidth is never a problem with mining, initial investment, consumption/cooling and space are the real problem

thanks for this., i always wondered how much bandwidth does the ASIC uses, at my place internet goes down frequently.
i wonder what hapens when internet goes down, does the ASIC keeps mining or just goes haywire ?
The bandwidth requirements are very negligible. However, keep an eye on the latency times to your pool (I'm assuming you will use one).
High latency times will increase the number of stale blocks which are just wasted effort. Perhaps set up a quick and dirty script to watch ping times.
full member
Activity: 236
Merit: 250
why mine with a phone though?
Mining with a phone or router is not the same as using a phone or router to connect some ASIC boxes.
newbie
Activity: 4
Merit: 0
why mine with a phone though?
full member
Activity: 236
Merit: 250
If it's a sizable operation where a little downtime is costly, it can be worth setting up a cheap prepaid LTE hotspot as a backup. Probably the best way is to plug a LTE stick into a Raspberry Pi or similar, then configure it as the backup router. Set up the switches in a chain with the routers on opposite ends (ring/mesh if they support STP), thus minimizing the number of single failure points.
https://wiki.openwrt.org/doc/recipes/high-availability

Probably the most easiest to have 4G LTE ethernet modem as it doesnt need complicated USB set up with routers and is 100% compatible with all router with dual wan support. 
https://www.netgear.com/home/products/mobile-broadband/lte-modems/LB1120.aspx 
And then that router becomes a single failure point. Having two routers in failover configuration connected to opposite ends of the network is more reliable.
newbie
Activity: 1
Merit: 0
If it's a sizable operation where a little downtime is costly, it can be worth setting up a cheap prepaid LTE hotspot as a backup. Probably the best way is to plug a LTE stick into a Raspberry Pi or similar, then configure it as the backup router. Set up the switches in a chain with the routers on opposite ends (ring/mesh if they support STP), thus minimizing the number of single failure points.
https://wiki.openwrt.org/doc/recipes/high-availability

Probably the most easiest to have 4G LTE ethernet modem as it doesnt need complicated USB set up with routers and is 100% compatible with all router with dual wan support. 
https://www.netgear.com/home/products/mobile-broadband/lte-modems/LB1120.aspx 
full member
Activity: 145
Merit: 100
Blocklancer - Freelance on the Blockchain
Many thanks for helping the new miners rip to build up the bitcoin income.
legendary
Activity: 1498
Merit: 1030
I can confirm that even junky Virgin Mobile 3G cell connection was enough bandwidth to support a small-to-mid sized farm and would be plenty for a backup - but I don't think they offer their "unlimited" 3G plan any more, just LTE (which in theory should work a lot better).



full member
Activity: 236
Merit: 250
If it's a sizable operation where a little downtime is costly, it can be worth setting up a cheap prepaid LTE hotspot as a backup. Probably the best way is to plug a LTE stick into a Raspberry Pi or similar, then configure it as the backup router. Set up the switches in a chain with the routers on opposite ends (ring/mesh if they support STP), thus minimizing the number of single failure points.
https://wiki.openwrt.org/doc/recipes/high-availability
member
Activity: 65
Merit: 10
If you're not online, you are not mining.
legendary
Activity: 3248
Merit: 1070
according to this old thread https://bitcointalksearch.org/topic/how-much-bandwidth-does-mining-take-10860, the usage is very low around 2mb per hour, you can build a huge farm and still consume very low

bandwidth is never a problem with mining, initial investment, consumption/cooling and space are the real problem

thanks for this., i always wondered how much bandwidth does the ASIC uses, at my place internet goes down frequently.
i wonder what hapens when internet goes down, does the ASIC keeps mining or just goes haywire ?

obviously it can't mine, here everythign function with internet if you have no connection there is no mining and no bitcoin

but the good thing is that you can have your usb stick and connect just fine with it when connection go down from ISP
sr. member
Activity: 434
Merit: 270
according to this old thread https://bitcointalksearch.org/topic/how-much-bandwidth-does-mining-take-10860, the usage is very low around 2mb per hour, you can build a huge farm and still consume very low

bandwidth is never a problem with mining, initial investment, consumption/cooling and space are the real problem

thanks for this., i always wondered how much bandwidth does the ASIC uses, at my place internet goes down frequently.
i wonder what hapens when internet goes down, does the ASIC keeps mining or just goes haywire ?
full member
Activity: 252
Merit: 100
hank you for the information
gets disasters, to build a new mining rig to increase revenue bitcoin
newbie
Activity: 32
Merit: 0
Thank you so much everyone Smiley
sr. member
Activity: 280
Merit: 250
🌟-=BitCAD=-🌟 New_Business_Era
according to this old thread https://bitcointalksearch.org/topic/how-much-bandwidth-does-mining-take-10860, the usage is very low around 2mb per hour, you can build a huge farm and still consume very low
Thanks for this information.
Im planning to build a mining rig but not to mine a Bitcoin I want to mine some popular altcoin this day.
legendary
Activity: 3248
Merit: 1070
according to this old thread https://bitcointalksearch.org/topic/how-much-bandwidth-does-mining-take-10860, the usage is very low around 2mb per hour, you can build a huge farm and still consume very low

bandwidth is never a problem with mining, initial investment, consumption/cooling and space are the real problem
hero member
Activity: 658
Merit: 500
Visualize whirledps
Hi guys!!! I have Two S9 and I would like to know how much bandwidth does an Antminer take per month? thank you I hope you can help me

I don't have a number for you, but a miner (S7, S9 etc.) uses very little bandwidth to UL/DL data from a pool. If you were to use a proxy it would take even less. But with only two miners, a proxy isn't really needed.
Good luck.
newbie
Activity: 32
Merit: 0
Hi guys!!! I have Two S9 and I would like to know how much bandwidth does an Antminer take per month? thank you I hope you can help me
Jump to: