Topic: How many R4s can I run on an APW3 running 220? (Read 429 times)
IBM 2880W is not suitable for home due to noise. DPS-4K is overkill for 2 units, but leaves room for expansion if you wanted to go that route. Economically speaking it's a toss-up (in comparison to APW5), but there's nothing wrong with Bitmain's PSU's. If you have APW3's use them!
I'm looking for the most efficient setup for 2 R4s in a home on 220 so any insight is welcome on better PSUs
You can check my sig for some very good alternatives to the APW5 as well. I have a DPS-4K PSU that could power 4x R4's, or the IBM 2880W that could power 3 of them.
So one Psu per R4 until an APW5 can be ordered, thanks.
A single R4 can pull between 845-921W, the APW3 is rated to 1600W regardless of input voltage.
I just ordered some R4s and I have an APW3 on a 220 outlet, can I run 2 R4s on that one power supply?
I have a couple of APW3s so is running one power supply for each R4 better?
Should I just bite the bullet and get an APW5?
I have a couple of APW3s so is running one power supply for each R4 better?
Should I just bite the bullet and get an APW5?
Jump to: