Topic: how to change clock speeds to improve hash rate on multi gpu - paying 0.01btc (Read 1149 times)
January 29, 2017, 05:41:09 PM
I think we need more screenshots with temperature, clocks and gpu/mem loading monitoring. Can you share some? I prefer MSI Afteburner or GPU-Z for this.
January 29, 2017, 04:47:33 PM
Find a common minimum for the two RX 470's and a common minimum for the two RX 480's that they are stable at individually. Then, use a third party tool like watttool to set the clocks instead of using wattman.
Also, try to lower core/mem clocks by 50/50 each and check stability, repeat till stable.
Also, try to lower core/mem clocks by 50/50 each and check stability, repeat till stable.
I have done all of this, I am using trixx
the cards are 100% stable individually but i cannot get more than 1 card to increase in hash rate **cries
January 29, 2017, 01:45:26 AM
try restarting the miner after setting clock change
January 28, 2017, 06:58:10 PM
Find a common minimum for the two RX 470's and a common minimum for the two RX 480's that they are stable at individually. Then, use a third party tool like watttool to set the clocks instead of using wattman.
Also, try to lower core/mem clocks by 50/50 each and check stability, repeat till stable.
Also, try to lower core/mem clocks by 50/50 each and check stability, repeat till stable.
January 28, 2017, 04:33:55 AM
please help guys
my main problem is that individually when i change mem clock the cards increase but as soon as i try to alter more than one cards memory clock on trixx then my hash rates for every card after the first card dont work properly
my main problem is that individually when i change mem clock the cards increase but as soon as i try to alter more than one cards memory clock on trixx then my hash rates for every card after the first card dont work properly
I empirically discovered that multiple cards modded with exactly same GPU and MEMORY clock work better when put together.
I would suggest to set the lower supported GPU and memory clock and try if something improves
i have since taken out my rx480s so the rig consists of 2x rx470s
same problem though
only one has an increase in speed when altering memory clock
when i try to change the memory clock of the second exact same card to the exact same memory clock as the first card..... no results to hashrate or negative results to hash rate, i have tried using lower memory clock speed s with no luck, keep in mind the other card is going great at the same clock (and its the exact same card)
January 28, 2017, 04:21:48 AM
please help guys
my main problem is that individually when i change mem clock the cards increase but as soon as i try to alter more than one cards memory clock on trixx then my hash rates for every card after the first card dont work properly
my main problem is that individually when i change mem clock the cards increase but as soon as i try to alter more than one cards memory clock on trixx then my hash rates for every card after the first card dont work properly
I empirically discovered that multiple cards modded with exactly same GPU and MEMORY clock work better when put together.
I would suggest to set the lower supported GPU and memory clock and try if something improves
January 28, 2017, 04:15:02 AM
please help guys
my main problem is that individually when i change mem clock the cards increase but as soon as i try to alter more than one cards memory clock on trixx then my hash rates for every card after the first card dont work properly
my main problem is that individually when i change mem clock the cards increase but as soon as i try to alter more than one cards memory clock on trixx then my hash rates for every card after the first card dont work properly
January 27, 2017, 04:50:19 PM
Are You using powered risers , or the cards plugged in to the motherboard ?
Vga cards have 4 or 8 GB of memory ?
What motherboard are you using ?
What PSU are you using for this setup ?
Vga cards have 4 or 8 GB of memory ?
What motherboard are you using ?
What PSU are you using for this setup ?
rx480s are 8gb rx470s are 4gb
mobo and psu are fine because i have multiple rigs with the same gear working perfectly
i am using risers
January 27, 2017, 06:10:45 AM
May be little power PSU. Try reinstalling driver. Remove old driver with Display Driver Uninstaller(DDU).
January 26, 2017, 09:23:03 PM
Are You using powered risers , or the cards plugged in to the motherboard ?
Vga cards have 4 or 8 GB of memory ?
What motherboard are you using ?
What PSU are you using for this setup ?
Vga cards have 4 or 8 GB of memory ?
What motherboard are you using ?
What PSU are you using for this setup ?
January 26, 2017, 03:29:44 PM
any help would be appreciated guys
January 25, 2017, 10:08:22 PM
please post some numbers about your hash rate ... how many gpu in the rig, are u using powered risers ?
full system spec can help also
full system spec can help also
windows 10
celeron
8gb ram
i have 2x rx480 and 2x rx470 on this rig to make the 4 cards
the rx480s:
mem clock 2200
gpu clock 1266
30.7mhs stable hash rate
the rx470s
mem clock 1950
gpu clock 1216
27.6mhs stable hash rate
however those hash rates are only when individually tested
when i connect all 4 cards at once and start chaning mem clocks and gpu clocks to these exact same figures then my hash rates range from, 24-10mhs
January 25, 2017, 10:03:41 PM
please post some numbers about your hash rate ... how many gpu in the rig, are u using powered risers ?
full system spec can help also
full system spec can help also
January 25, 2017, 06:03:52 PM
power, temperature and timings.. check please and report
January 25, 2017, 03:58:04 PM
i have increased my hash rates by copying lower straps to higher strap fields
I change my gpu clocks and memory clocks to get fantastic results (30.7mhs rx480 and 27.8mhs for rx470)
however when I put my rigs together and change memory clock and gpy clock to the same as when i tested them individually then my hash rates go all over the place
any advice?
I apologize if this was answered elsewhere
cheers
I change my gpu clocks and memory clocks to get fantastic results (30.7mhs rx480 and 27.8mhs for rx470)
however when I put my rigs together and change memory clock and gpy clock to the same as when i tested them individually then my hash rates go all over the place
any advice?
I apologize if this was answered elsewhere
cheers
Jump to: