Topic: how to config 4x r9 290..please help me..i will donate some ltc when i can mine (Read 1168 times)
December 20, 2013, 07:12:14 AM
i tried all way..i know problem now..4x r9 290 need new main..
December 16, 2013, 10:55:03 AM
which diver(13.11 beta) i should use and cgminer???
what motherboard and psu do you have?
you probably needed an extra power riser for the fourth card?
if you have a very beefy psu then its ok, check the riser quality by removing a card from the MB.
Otherwise try undervolting the others untill the fourth works?
December 16, 2013, 09:43:27 AM
If problem persists with all 4 cards together then maybe it has something to do with crossfire? Turn CF off (in performance) and see if it works.
December 16, 2013, 09:34:03 AM
dont connect your pc with remote desktop, install logmein or something else, make auto start your cgminer by putting a bat file under start hit restart and it should start to work, be sure your pci is connected well, be sure you have enough power to supply 4x
December 16, 2013, 09:29:29 AM
Error code 43 either means the card is faulty or there is a problem with the driver. Try reinstalling the driver? If that doesn't work, try to see if the card has any problems by putting it in a different computer.
yes..i tested each of them..1 card good..4 card together always have error code43..i don't know which driver i should use..i try some diver..but it ;s not working December 16, 2013, 09:09:46 AM
Error code 43 either means the card is faulty or there is a problem with the driver. Try reinstalling the driver? If that doesn't work, try to see if the card has any problems by putting it in a different computer.
December 16, 2013, 08:58:39 AM
I use the same driver as you so driver should be fine and I'm positive that you will not need a dummy plug.
cgminer should give the best performance. You can write the config for all of the cards in one file or you can use GUIMiner since it is easier to use.
but my computer just ricieve 3 gpus..i tried to used win 8 but it's the same..1 card error code 43..i don;t know how to fix it.. cgminer should give the best performance. You can write the config for all of the cards in one file or you can use GUIMiner since it is easier to use.
December 16, 2013, 08:46:56 AM
I use the same driver as you so driver should be fine and I'm positive that you will not need a dummy plug.
cgminer should give the best performance. You can write the config for all of the cards in one file or you can use GUIMiner since it is easier to use.
cgminer should give the best performance. You can write the config for all of the cards in one file or you can use GUIMiner since it is easier to use.
December 16, 2013, 07:01:26 AM
which diver(13.11 beta) i should use and cgminer???
Jump to: