Topic: How to create a secure Bitcoin Vanity Paper Wallet on Ubuntu live USB & Windows (Read 4323 times)
October 01, 2017, 01:44:17 PM
Well I needed to revisit my own thread because I needed to make some more of these so thought I might as well bump the thread while I'm here!!
September 26, 2016, 04:01:47 AM
I store 99% of my bitcoins on paper wallets because I'm paranoid ever since I lost 0.05BTC from Blockchain.info when I just started out with bitcoins.
Aren't you paranoid someone will take your paper wallets?I was looking for a method to import a vanity address into a paper wallet printed by bitaddress.org (but I didn't find what I was looking for).
I found what I wanted (with some effort):1. Use Chrome browser to go to https://www.bitaddress.org/ (of course it's recommended to do this offline from a LIVE CD)
2. Click Paper Wallet
3. Right-click on the private key, select Inspect
4. Replace it with the private key for your vanity address
5. Repeat steps 3 and 4 for the bitcoin address
6. Print to PDF
7. Click Wallet details (still on bitaddress.org) and enter the private key for your vanity address
8. Edit the PDF, I used The GIMP, which is probably available on your LIVE CD. Open it in 600 dpi resolution.
9. Copy the QR-codes Bitcoin Address and Private Key WIF and paste them into the PDF
10. Print the PDF, cut it out, fold it, tape it, and don't lose it.
You now have the bitaddress.org paper wallet with your own private key, bitcoin address, and QR-codes.
Final result:
(needless to say: do not use this one!)
September 23, 2016, 05:40:50 PM
I this something that can be don offline though? I was trying to do this as securely as possible.
You can do it offline, from a LIVE Linux CD that hopefully recognizes your dump printer that connects with a cable and doesn't save the pages in its memory.Very nice. Thanks for the addition! I wasn't able to find anything about it when I Googled back in the day so that's why I set out to figure it out. I store 99% of my bitcoins on paper wallets because I'm paranoid ever since I lost 0.05BTC from Blockchain.info when I just started out with bitcoins.
September 23, 2016, 05:36:09 PM
I this something that can be don offline though? I was trying to do this as securely as possible.
You can do it offline, from a LIVE Linux CD that hopefully recognizes your dump printer that connects with a cable and doesn't save the pages in its memory. September 23, 2016, 05:22:53 PM
Google brought me to this old topic. I was looking for a method to import a vanity address into a paper wallet printed by bitaddress.org (but I didn't find what I was looking for).
Thanks for the post! That's true it does look better. I wasn't to concerned about someone finding this hidden in my house (for 2 reasons, I don't have anyone over that I don't trust and I know most people wouldn't know what they were looking at anyways) but for people who are,this would be a great option. I this something that can be don offline though? I was trying to do this as securely as possible.
September 22, 2016, 03:36:56 AM
Google brought me to this old topic. I was looking for a method to import a vanity address into a paper wallet printed by bitaddress.org (but I didn't find what I was looking for).
I'd like to combine two posts into one new post:
Bitaddress.org can print good looking (small) paper wallets, but it doesn't give the option to import a private key. Bitcoinpaperwallet.com makes this possible. The paper wallets are quite large though.
Bitaddress.org produces this (no vanity, fold into 3 layers, then use tape or laminate it):
Bitcoinpaperwallet.com produces this (vanity possible, fold the right side into 3 layers):
Not only does it look better than just printing the overview-page from bitaddress, it's also not possible to copy the private key for anybody who sees the paper without leaving evidence.
I'd like to combine two posts into one new post:
1. Go on bitaddress.org offline, on a Ubuntu live USB
11. Print out the wallet details page (to have the QR codes)
This gives you a simple (but ugly) printed page.11. Print out the wallet details page (to have the QR codes)
This is too complicated for the normal ppl. Why not buy one from here https://bitcoinpaperwallet.com/ ?
I wouldn't say "buy", as the site doesn't sell paper wallets (they do sell related items though). Bitcoinpaperwallet.com is the easiest site I've found to print a vanity address into a paper wallet that looks nice.Bitaddress.org can print good looking (small) paper wallets, but it doesn't give the option to import a private key. Bitcoinpaperwallet.com makes this possible. The paper wallets are quite large though.
Bitaddress.org produces this (no vanity, fold into 3 layers, then use tape or laminate it):
Bitcoinpaperwallet.com produces this (vanity possible, fold the right side into 3 layers):
Not only does it look better than just printing the overview-page from bitaddress, it's also not possible to copy the private key for anybody who sees the paper without leaving evidence.
January 02, 2016, 12:25:42 PM
I successfully made my first few bitcoin paper wallets! Updated OP to show my method.
I'll edit the title so people can search it easily.
1Chris4GEoLLjdh4juFXGwY7snaazuxvKb
The snaaz is because I'm snazzy (I can only assume
)
I'll edit the title so people can search it easily.
1Chris4GEoLLjdh4juFXGwY7snaazuxvKb
The snaaz is because I'm snazzy (I can only assume
) 
December 31, 2015, 03:09:18 AM
Did you run vanitygen with the pubkey option -P or without (just 1Chris)?
If you ran it without -P you can just import the private key into your wallet.
If you ran it with -P you need to conver the private key from vanitygen its hex version. You can do this via bitaddress with the "Wallet Details" options. Once you have both private keys in hex format you go to "Vanity Wallet" and put them in the fields for Step 2. Select add and click Calculate. The private key you get can be imported in your wallet.
If you ran it without -P you can just import the private key into your wallet.
If you ran it with -P you need to conver the private key from vanitygen its hex version. You can do this via bitaddress with the "Wallet Details" options. Once you have both private keys in hex format you go to "Vanity Wallet" and put them in the fields for Step 2. Select add and click Calculate. The private key you get can be imported in your wallet.
Oh I ran it without -P... I didn't know that's how you did it. Rather than importing the key I made on Windows (not too secure) I'll look into the other method. Thank you very much!
If you do it yourself its perfectly fine to run it without -P the option is just to allow someone else to do the work for you without them knowing the final private key. If you do the work on your own machine its fine to run it just with the prefix you want.
If you dont trust the machine you can do split key vanity over two machines you own, but its probably better to make sure you can trust your own computer as much as possible.
Off topic: The oil came in today and my wife loves it. Also got a freebie from them that smells like orange. She seems to like that one too! Woohoo! "It smells like vitamin C tablets!" lol.
lol, as long as she enjoys it I guess
December 30, 2015, 06:37:28 PM
Did you run vanitygen with the pubkey option -P or without (just 1Chris)?
If you ran it without -P you can just import the private key into your wallet.
If you ran it with -P you need to conver the private key from vanitygen its hex version. You can do this via bitaddress with the "Wallet Details" options. Once you have both private keys in hex format you go to "Vanity Wallet" and put them in the fields for Step 2. Select add and click Calculate. The private key you get can be imported in your wallet.
If you ran it without -P you can just import the private key into your wallet.
If you ran it with -P you need to conver the private key from vanitygen its hex version. You can do this via bitaddress with the "Wallet Details" options. Once you have both private keys in hex format you go to "Vanity Wallet" and put them in the fields for Step 2. Select add and click Calculate. The private key you get can be imported in your wallet.
Oh I ran it without -P... I didn't know that's how you did it. Rather than importing the key I made on Windows (not too secure) I'll look into the other method. Thank you very much!
Off topic: The oil came in today and my wife loves it. Also got a freebie from them that smells like orange. She seems to like that one too! Woohoo! "It smells like vitamin C tablets!" lol.
December 30, 2015, 01:27:31 PM
Did you run vanitygen with the pubkey option -P or without (just 1Chris)?
If you ran it without -P you can just import the private key into your wallet.
If you ran it with -P you need to conver the private key from vanitygen its hex version. You can do this via bitaddress with the "Wallet Details" options. Once you have both private keys in hex format you go to "Vanity Wallet" and put them in the fields for Step 2. Select add and click Calculate. The private key you get can be imported in your wallet.
If you ran it without -P you can just import the private key into your wallet.
If you ran it with -P you need to conver the private key from vanitygen its hex version. You can do this via bitaddress with the "Wallet Details" options. Once you have both private keys in hex format you go to "Vanity Wallet" and put them in the fields for Step 2. Select add and click Calculate. The private key you get can be imported in your wallet.
December 30, 2015, 12:48:18 PM
-snip-
Why not just store all my Bitcoins on blockchain.info? I don't want anyone else to have access to my private keys.
I'll have to poke around with this later and see what we can do...
Why not just store all my Bitcoins on blockchain.info? I don't want anyone else to have access to my private keys.
I'll have to poke around with this later and see what we can do...
Vanity addresses can be created without anyone else knowing your private key while at the same time allowing someone else to do the majority of the work. Its called split key vanity gen. Let me know what prefix you want for the address and I can make you an offer.
*mind blown*
How does that work exactly? The prefix I'd want is Chris.
Edit: Wow. I've been going about this all wrong. I could simply make a vanity address on vanitygen on Windows then crack open bitaddress on Ubuntu Live USB. Right?! Oh Shorena... What would I do without you?
Edit2: OK so I made my vanity address... But I'm a little confused as to what to do with it on bitaddress.org. Do I punch in The vanity address at all? Or the private key for the vanity address + the private key calculated on bitaddress.org? Neither seem to give me a new vanity address.
P.s. The random smelly German oil is on it's way!
I hope it smells good.
1Chris is relativly easy. I have a quick how to in my thread -> https://bitcointalksearch.org/topic/bitcoin-vanity-addresses-1257817
If you want, I can do the repfix for a donation.
Oh I've already calculated my address with 1Chris. I'm just trying to figure out how I go ahead and "blend" the two together on bitaddress (or however you word that).
December 30, 2015, 04:30:18 AM
-snip-
Why not just store all my Bitcoins on blockchain.info? I don't want anyone else to have access to my private keys.
I'll have to poke around with this later and see what we can do...
Why not just store all my Bitcoins on blockchain.info? I don't want anyone else to have access to my private keys.
I'll have to poke around with this later and see what we can do...
Vanity addresses can be created without anyone else knowing your private key while at the same time allowing someone else to do the majority of the work. Its called split key vanity gen. Let me know what prefix you want for the address and I can make you an offer.
*mind blown*
How does that work exactly? The prefix I'd want is Chris.
Edit: Wow. I've been going about this all wrong. I could simply make a vanity address on vanitygen on Windows then crack open bitaddress on Ubuntu Live USB. Right?! Oh Shorena... What would I do without you?
Edit2: OK so I made my vanity address... But I'm a little confused as to what to do with it on bitaddress.org. Do I punch in The vanity address at all? Or the private key for the vanity address + the private key calculated on bitaddress.org? Neither seem to give me a new vanity address.
P.s. The random smelly German oil is on it's way!
I hope it smells good.
1Chris is relativly easy. I have a quick how to in my thread -> https://bitcointalksearch.org/topic/bitcoin-vanity-addresses-1257817
If you want, I can do the repfix for a donation.
December 29, 2015, 06:15:45 PM
-snip-
Why not just store all my Bitcoins on blockchain.info? I don't want anyone else to have access to my private keys.
I'll have to poke around with this later and see what we can do...
Why not just store all my Bitcoins on blockchain.info? I don't want anyone else to have access to my private keys.
I'll have to poke around with this later and see what we can do...
Vanity addresses can be created without anyone else knowing your private key while at the same time allowing someone else to do the majority of the work. Its called split key vanity gen. Let me know what prefix you want for the address and I can make you an offer.
*mind blown*
How does that work exactly? The prefix I'd want is Chris.
Edit: Wow. I've been going about this all wrong. I could simply make a vanity address on vanitygen on Windows then crack open bitaddress on Ubuntu Live USB. Right?! Oh Shorena... What would I do without you?
Edit2: OK so I made my vanity address... But I'm a little confused as to what to do with it on bitaddress.org. Do I punch in The vanity address at all? Or the private key for the vanity address + the private key calculated on bitaddress.org? Neither seem to give me a new vanity address.
P.s. The random smelly German oil is on it's way!
December 29, 2015, 10:54:28 AM
-snip-
Why not just store all my Bitcoins on blockchain.info? I don't want anyone else to have access to my private keys.
I'll have to poke around with this later and see what we can do...
Why not just store all my Bitcoins on blockchain.info? I don't want anyone else to have access to my private keys.
I'll have to poke around with this later and see what we can do...
Vanity addresses can be created without anyone else knowing your private key while at the same time allowing someone else to do the majority of the work. Its called split key vanity gen. Let me know what prefix you want for the address and I can make you an offer.
December 28, 2015, 11:46:16 PM
IIRC there are no precompiled linux versions of vanitygen, so you would need to compile it yourself every single time in order to use it on the live usb.
Type these into terminal to build
In the terminal, in the vanitygen's directory, run it as you normally would from the command line.
AFAIK this will not compile the gpu accelerated versions, so you will need to get the drivers and libraries for that, but it is also card specific, so it depends on your computer.
Type these into terminal to build
Code:
sudo apt-get install build-essential git libssl-dev libpcre3-dev
git clone https://github.com/samr7/vanitygen.git
cd vanitygen
make
In the terminal, in the vanitygen's directory, run it as you normally would from the command line.
AFAIK this will not compile the gpu accelerated versions, so you will need to get the drivers and libraries for that, but it is also card specific, so it depends on your computer.
I got this: Unable to correct problems, you have held broken packages.
E: unable to locate package clone
E: Unable to locate package https
And a few others it couldn't locate
Edit: Also please note I'm not connected to the internet. I don't know if this will make a difference. I just thought I'd mention this because I see the github link (which is where I got vanitygen from in the first place).
Why not just store all my Bitcoins on blockchain.info? I don't want anyone else to have access to my private keys.
I'll have to poke around with this later and see what we can do...
December 28, 2015, 11:38:28 PM
IIRC there are no precompiled linux versions of vanitygen, so you would need to compile it yourself every single time in order to use it on the live usb.
Type these into terminal to build
In the terminal, in the vanitygen's directory, run it as you normally would from the command line.
AFAIK this will not compile the gpu accelerated versions, so you will need to get the drivers and libraries for that, but it is also card specific, so it depends on your computer.
Type these into terminal to build
Code:
sudo apt-get install build-essential git libssl-dev libpcre3-dev
git clone https://github.com/samr7/vanitygen.git
cd vanitygen
make
In the terminal, in the vanitygen's directory, run it as you normally would from the command line.
AFAIK this will not compile the gpu accelerated versions, so you will need to get the drivers and libraries for that, but it is also card specific, so it depends on your computer.
I got this: Unable to correct problems, you have held broken packages.
E: unable to locate package clone
E: Unable to locate package https
And a few others it couldn't locate
Edit: Also please note I'm not connected to the internet. I don't know if this will make a difference. I just thought I'd mention this because I see the github link (which is where I got vanitygen from in the first place).
December 28, 2015, 11:35:25 PM
IIRC there are no precompiled linux versions of vanitygen, so you would need to compile it yourself every single time in order to use it on the live usb.
Type these into terminal to build
In the terminal, in the vanitygen's directory, run it as you normally would from the command line.
AFAIK this will not compile the gpu accelerated versions, so you will need to get the drivers and libraries for that, but it is also card specific, so it depends on your computer.
Type these into terminal to build
Code:
sudo apt-get install build-essential git libssl-dev libpcre3-dev
git clone https://github.com/samr7/vanitygen.git
cd vanitygen
make
In the terminal, in the vanitygen's directory, run it as you normally would from the command line.
AFAIK this will not compile the gpu accelerated versions, so you will need to get the drivers and libraries for that, but it is also card specific, so it depends on your computer.
I got this: Unable to correct problems, you have held broken packages.
E: unable to locate package clone
E: Unable to locate package https
And a few others it couldn't locate
Edit: Also please note I'm not connected to the internet. I don't know if this will make a difference. I just thought I'd mention this because I see the github link (which is where I got vanitygen from in the first place).
December 28, 2015, 10:39:48 PM
IIRC there are no precompiled linux versions of vanitygen, so you would need to compile it yourself every single time in order to use it on the live usb.
Type these into terminal to build
In the terminal, in the vanitygen's directory, run it as you normally would from the command line.
AFAIK this will not compile the gpu accelerated versions, so you will need to get the drivers and libraries for that, but it is also card specific, so it depends on your computer.
Type these into terminal to build
Code:
sudo apt-get install build-essential git libssl-dev libpcre3-dev
git clone https://github.com/samr7/vanitygen.git
cd vanitygen
make
In the terminal, in the vanitygen's directory, run it as you normally would from the command line.
AFAIK this will not compile the gpu accelerated versions, so you will need to get the drivers and libraries for that, but it is also card specific, so it depends on your computer.
I got this: Unable to correct problems, you have held broken packages.
E: unable to locate package clone
E: Unable to locate package https
And a few others it couldn't locate
Edit: Also please note I'm not connected to the internet. I don't know if this will make a difference. I just thought I'd mention this because I see the github link (which is where I got vanitygen from in the first place).
December 28, 2015, 10:25:47 PM
IIRC there are no precompiled linux versions of vanitygen, so you would need to compile it yourself every single time in order to use it on the live usb.
Type these into terminal to build
In the terminal, in the vanitygen's directory, run it as you normally would from the command line.
AFAIK this will not compile the gpu accelerated versions, so you will need to get the drivers and libraries for that, but it is also card specific, so it depends on your computer.
Type these into terminal to build
Code:
sudo apt-get install build-essential git libssl-dev libpcre3-dev
git clone https://github.com/samr7/vanitygen.git
cd vanitygen
make
In the terminal, in the vanitygen's directory, run it as you normally would from the command line.
AFAIK this will not compile the gpu accelerated versions, so you will need to get the drivers and libraries for that, but it is also card specific, so it depends on your computer.
December 28, 2015, 10:04:31 PM
I'm sure that's a very very helpful post but I just don't understand what I should type to be honest. Sorry. I know it's probably a really dumb question. Pretend I'm 6 years old 
IIRC there are no precompiled linux versions of vanitygen, so you would need to compile it yourself every single time in order to use it on the live usb.
Reserving this spot while I type up detailed instructions.
Reserving this spot while I type up detailed instructions.
Thanks! Yes I understand I would have to compile it myself each time.
I'll always have this thread to come back to haha! 
December 28, 2015, 09:43:02 PM
https://nastyfans.org/download/oclvanitygen.txt
Quote
#!/bin/sh
# 2015-10-09
#
# This is the procedure to get oclvanitygen running with AMD Raedon 7xxx
# on a fresh install of Ubuntu 64-bit. (tested with Ubuntu 12.04 and 14.04)
# install tools, dependencies and driver
sudo add-apt-repository "deb http://archive.ubuntu.com/ubuntu $(lsb_release -sc) restricted"
sudo apt-get update
sudo apt-get install build-essential git libssl-dev libpcre3-dev opencl-headers fglrx fglrx-dev
sudo env DISPLAY=:0.0 aticonfig --adapter=all --initial
sudo reboot
# get source and compile oclvanitygen
git clone https://github.com/samr7/vanitygen.git
cd vanitygen
wget https://nastyfans.org/download/patch-oclvanitygen-amd.diff
patch -p1 < patch-oclvanitygen-amd.diff
wget https://nastyfans.org/download/AMD-APP-SDK-v2.7-lib-lnx64.tar.gz
mkdir sdklib
tar -xzvf AMD-APP-SDK-v2.7-lib-lnx64.tar.gz -C sdklib
make oclvanitygen
# run oclvanitygen (from inside vanitygen directory)
env LD_LIBRARY_PATH=./sdklib ./oclvanitygen -D 0:0 -k 1Nasty
# 2015-10-09
#
# This is the procedure to get oclvanitygen running with AMD Raedon 7xxx
# on a fresh install of Ubuntu 64-bit. (tested with Ubuntu 12.04 and 14.04)
# install tools, dependencies and driver
sudo add-apt-repository "deb http://archive.ubuntu.com/ubuntu $(lsb_release -sc) restricted"
sudo apt-get update
sudo apt-get install build-essential git libssl-dev libpcre3-dev opencl-headers fglrx fglrx-dev
sudo env DISPLAY=:0.0 aticonfig --adapter=all --initial
sudo reboot
# get source and compile oclvanitygen
git clone https://github.com/samr7/vanitygen.git
cd vanitygen
wget https://nastyfans.org/download/patch-oclvanitygen-amd.diff
patch -p1 < patch-oclvanitygen-amd.diff
wget https://nastyfans.org/download/AMD-APP-SDK-v2.7-lib-lnx64.tar.gz
mkdir sdklib
tar -xzvf AMD-APP-SDK-v2.7-lib-lnx64.tar.gz -C sdklib
make oclvanitygen
# run oclvanitygen (from inside vanitygen directory)
env LD_LIBRARY_PATH=./sdklib ./oclvanitygen -D 0:0 -k 1Nasty
December 28, 2015, 08:29:11 PM
Edit for my future reference or anyone else that would like a guide on how to make a secure vanity wallet or paper wallet on Windows and using a Ubuntu Live USB/CD.
1. Go on bitaddress.org offline, on a Ubuntu live USB
2. Generate as many single addresses as you want
3. Convert to Hex (wallet details on bitaddress.org)
4. Make a list of hex addresses + private keys and print it out (don't save it on USB. That's going to run on Windows again)
5. Shut down. Boot up windows
6. Start > Run > Cmd
7. Drag over vanitygen64 to cmd (enter) drag over vanity address again (space) -v -P (hex pub key) 1xxx (whatever you want as your vanity) (enter)
8. Copy partial private key down on USB
9. Shut down windows - Boot up Ubuntu Live USB
10. Open bitaddress again and go to vanity address and put in the private key (from step 4) and the partial private key. This should give you the vanity address that was calculated on vanitygen. If not you did something wrong.
11. Print out the wallet details page (to have the QR codes)
12. Import the public address into your favourite wallet.
Optional: Import the private key. If you don't it's a paper wallet, if you do it's a hot wallet.
Original post
-------------------------
First thing's first: I don't really understand code. I'll probably need this fairly dumbed down. Example: Type this.. hit enter.. type this, this, this hit enter and you're good to go!)
I'm trying to make a secure vanity address and/or a secure paper wallet vanity address. I've found a few guides on how to get vanitygen to work on Linux (specifically Ubuntu 14.04.3) but I'm using a live USB.
The location of the vanitygen-master would be file:///cdrom/vanitygen-master
When I type this in Terminal it can't find it. Am I doing something wrong? Is this not possible from a live USB?
So far I've tried:
File:///cdrom/vanitygen-master
cdrom/vanitygen-master
cdrom/vanitygen-master/vanitygen-master
Cd/vanitygen-master
File:///cd/vanitygen-master
What am I doing wrong (if this is possible)? Thanks!
1. Go on bitaddress.org offline, on a Ubuntu live USB
2. Generate as many single addresses as you want
3. Convert to Hex (wallet details on bitaddress.org)
4. Make a list of hex addresses + private keys and print it out (don't save it on USB. That's going to run on Windows again)
5. Shut down. Boot up windows
6. Start > Run > Cmd
7. Drag over vanitygen64 to cmd (enter) drag over vanity address again (space) -v -P (hex pub key) 1xxx (whatever you want as your vanity) (enter)
8. Copy partial private key down on USB
9. Shut down windows - Boot up Ubuntu Live USB
10. Open bitaddress again and go to vanity address and put in the private key (from step 4) and the partial private key. This should give you the vanity address that was calculated on vanitygen. If not you did something wrong.
11. Print out the wallet details page (to have the QR codes)
12. Import the public address into your favourite wallet.
Optional: Import the private key. If you don't it's a paper wallet, if you do it's a hot wallet.
Original post
-------------------------
First thing's first: I don't really understand code. I'll probably need this fairly dumbed down. Example: Type this.. hit enter.. type this, this, this hit enter and you're good to go!)
I'm trying to make a secure vanity address and/or a secure paper wallet vanity address. I've found a few guides on how to get vanitygen to work on Linux (specifically Ubuntu 14.04.3) but I'm using a live USB.
The location of the vanitygen-master would be file:///cdrom/vanitygen-master
When I type this in Terminal it can't find it. Am I doing something wrong? Is this not possible from a live USB?
So far I've tried:
File:///cdrom/vanitygen-master
cdrom/vanitygen-master
cdrom/vanitygen-master/vanitygen-master
Cd/vanitygen-master
File:///cd/vanitygen-master
What am I doing wrong (if this is possible)? Thanks!
Jump to: