How to des new driver of cgminer for BE200 chips

I porting new driver of cgminer for my hashboard,but i got HW.

below is MCU code:
while(1) {
      res = GetUART();
      switch(res)
      {
         case C_ASK:
             Astat[ch] = SPI_R();
             if (Astat[ch] & 0x02)               //Has nonce
             {
                PutcUART(A_YES);
                GetNonce(s_job[ch].nonce,Astat[ch]);
                PutnUART(s_job[ch].nonce,4);
                Clr_Mask();
             }
             else
             if (Astat[ch] & 0x01)               //Ready to got new job
             {
                PutcUART(A_WAL);
             }
             else //Chip busy
             {
               PutcUART(A_NO);
             }
             break;
         case C_JOB:
            for (i=0;i<50;i++)
            {
               job_buff   =   GetUART();
            }
            PutcUART(0x58);
            memcpy((void*)&s_job[ch],(void*)job_buff,SZ_MJOB);
            BYTE * p = &s_job[ch];
            /*
            for(i=0;i<32;i++)      { SPI_IO(i|0x80); SPI_IO(s_job[ch].midstate); }
            for(c=0;c<4;c++)      { SPI_IO(i|0x80); SPI_IO(s_job[ch].mshit);i++;}
            for(c=0;c<4;c++)      { SPI_IO(i|0x80); SPI_IO(s_job[ch].ntime);i++;}
            for(c=0;c<4;c++)      { SPI_IO(i|0x80); SPI_IO(s_job[ch].ndiff);i++;}
            */
            //for(i=0;i<44;i++)      { SPI_IO(i|0x80); SPI_IO(*(p+i)); }
            for(i=0;i<44;i++)      { SPI_IO(i|0x80); SPI_IO(job_buff); }
            Start_Job();
            break;
      }

Below is driver of cgminer:
static uint8_t *create_job(uint8_t chip_id, uint8_t job_id,
const char *midstate, const char *wdata, const double sdiff)
{
static uint8_t job[58] = {
/* midstate */
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
/* wdata */
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
/*exnc2*/
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
};
uint32_t *p1 = (uint32_t *) &job[32];
uint32_t *p2 = (uint32_t *) wdata;
uint32_t diffIdx,*diff=(uint32_t*)&job[42]; //difficulty pointer

swab256(job, midstate);
p1 = (uint32_t *) &job[32];
p2 = (uint32_t *) wdata;
p1[0] = bswap_32(p2[0]);
p1[1] = bswap_32(p2[1]);
p1[2] = bswap_32(p2[2]);

/*
if(sdiff>4096)
*diff=difficult_Tbl[15];
else {
if(opt_diff>=1&&opt_diff<=16)
{
diffIdx=opt_diff-1;
*diff=difficult_Tbl[diffIdx];
}
else
*diff=difficult_Tbl[14];
}
*/
return job;
}

static bool set_work(int fd,struct work *work)
{
int ret;
char buff;
char cmd;
unsigned char *midstate = work->midstate;
unsigned char *wdata = work->data + 64;
double sdiff = work->sdiff;
uint8_t *jobdata = create_job(1,1,
midstate, wdata, sdiff);
cmd = C_JOB;

ret = icarus_write(fd,&cmd, 1);

ret = icarus_write(fd, jobdata, 50);
read(fd,&buff,1);
printf("respond:%02x\n",buff);
if(ret)
return true;
else
return false;

}

static bool get_nonce(int fd,struct work * work,uint8_t * nonce)
{
int ret;

ret = read(fd,nonce,4);

return true;
}

static int64_t icarus_scanhash(struct thr_info *thr, struct work *work,
__maybe_unused int64_t max_nonce)
{
struct cgpu_info *icarus;
int fd;
int ret;
char command = 0;

struct ICARUS_INFO *info;

unsigned char read_buff[128];
char *ob_hex;
uint32_t nonce;
int64_t hash_count;
uint32_t mask;
struct timeval tv_start, tv_finish, elapsed;
int curr_hw_errors, i;
bool was_hw_error;

int64_t estimate_hashes;

elapsed.tv_sec = elapsed.tv_usec = 0;

icarus = thr->cgpu;
if (icarus->device_fd == -1)
if (!icarus_prepare(thr)) {
applog(LOG_ERR, "%s%i: Comms error", icarus->drv->name, icarus->device_id);
dev_error(icarus, REASON_DEV_COMMS_ERROR);

// fail the device if the reopen attempt fails
return -1;
}

fd = icarus->device_fd;

info = icarus_info[icarus->device_id];

cgtime(&tv_start);

command = C_ASK;

ret = icarus_write(fd, &command, 1);
if (ret) {
do_icarus_close(thr);
applog(LOG_ERR, "%s%i: Comms error", icarus->drv->name, icarus->device_id);
dev_error(icarus, REASON_DEV_COMMS_ERROR);
return 0; /* This should never happen */
}

ret = read(fd,read_buff,1);

switch(read_buff[0])
{
case A_WAL: //ready to take a new master job
set_work(fd,work);
break;
case A_NO:
break; //nothing, means the chips are working/busy
case A_YES:
if(get_nonce(fd,work,(uint8_t*)&nonce))
nonce+=1;
//nonce = bswap_32(nonce);
submit_nonce(thr, work, nonce);
break; //there is a nonce in the FIFO
case A_STR:
break; // send a string or data followed by termination zero to the host, the host will print it.
}

//submit_nonce(thr, work, nonce);

}

Topic: How to des new driver of cgminer for BE200 chips (Read 1139 times)