How to make BAMT stable? | Bitcointalksearch.org

neurocis

member

Activity: 113

Merit: 23

Dreams are realities un-manifested.

I found this to be a combination of TC and clock ... I have one saphire that likes to do hard hang when it gets a little hot which requires a power cycle as a reboot gives the .Xauthority issue.

I do not think the issue is BAMT but configuration. The AMD linux driver cannot recover quite as well as the windows, but tuning has been my answer for stability.

neurocis.
Author - https://github.com/neurocis/coinvert for BAMT.

N[e]wBie

full member

Activity: 163

Merit: 100

I have this same problem, I was recommended that it was either a corrupt disk image or a problem with the USB drive. Make sure you are at least using a usb 3.0 disk image, and check the md5 of the BAMT OS.

jbass350z

newbie

Activity: 24

Merit: 0

I have 3 rigs running 6x 270 GPUs each. Most are Gigabyte, but a few are Asus. I get anywhere between 450-490 kh/s per GPU. At least once a day one or two of the rigs crashes, and there seems to be two types of failures:

1. The first type of failure the GPUs go to zero load and miner restart will usually get things going.

2. The second type of failure the GPUs are still under load but BAMT shows no mining activity, and SSH login is very laggy. A reboot is usually required to fix this.

Failure # 2 above often results in this message upon reboot:

xauth: (argv):1: merge: unable to open file /home/user/.Xauthority

Sometimes it takes a few reboots to get things running again. This is becoming frustrating because i cant babysit these miners all day and reboot them every time one freezes.

What do I do?

Topic: How to make BAMT stable? (Read 639 times)