Author

Topic: How to mine over Network Cable with S1? (Read 982 times)

sr. member
Activity: 616
Merit: 250
July 30, 2015, 03:21:02 AM
#14
Ok, so now I am able to get the S1 to mine over a Network Cable by changing the WAN to DHCP but I have to use WiFi to access the Config screen. But how do I access the Config screen threw the network cable instead of using 192.198.1.9 over wifi?  Shocked
sr. member
Activity: 616
Merit: 250
bump!
sr. member
Activity: 616
Merit: 250
plug a network cable into your laptop and straight into the s1

set your laptops network ipv4 to a 192.168.1.59 or similar IP

log into the s1 via 192.168.1.99 (i think that was default)

set your S1 to DHCP on WAN and LAN under the network tab

unplug the network cable from your laptop and into the router

reboot the s1

change laptops network ipv4 setting back to DHCP

log into your home router and find 'antminer' and see what the IP is

log into that IP and config your pools

done Smiley

It is connected, I can get it to it threw the Network Cable, but will only Mine on WiFi?
legendary
Activity: 1050
Merit: 1001
plug a network cable into your laptop and straight into the s1

set your laptops network ipv4 to a 192.168.1.59 or similar IP

log into the s1 via 192.168.1.99 (i think that was default)

set your S1 to DHCP on WAN and LAN under the network tab

unplug the network cable from your laptop and into the router

reboot the s1

change laptops network ipv4 setting back to DHCP

log into your home router and find 'antminer' and see what the IP is

log into that IP and config your pools

done Smiley
sr. member
Activity: 616
Merit: 250
anyone know whats wrong?
sr. member
Activity: 616
Merit: 250
July 22, 2015, 02:05:39 PM
#9
How do I get a S1 to mine on the network cord? I can only get it to mine on the WiFi?  I changed the Network settings to my router like it said in the guides but will only mine when the Wifi is turned on? I would rather have it mine hard wired to the router. ty!

Can you tell us a little about your network on IP and settings? And then post the LAN settings via a pic on here.

That will help a lot.


The settings r,  

IPv4 netmask  255.255.255.0

IPv4 gateway  192.168.1.1

IPv4 broadcast  192.168.1.255

Use custom DNS servers  192.168.1.1

 It is set to  STATIC addy




Change DNS to 8.8.8.8 (googls DNS).   Is your router giving out 192.168.1.X numbers?

If so try ip of pool and see if that makes any difference.  Also instead of typing next time try screen shot as mentioned Smiley
Change DNS in the router or the Miner?   Yes the Router is showing them numbers. 192.168.1.1

As I asked before can you please take a screenshot of your network page?  A screenshot not words Smiley
http://i120.photobucket.com/albums/o194/captron421/ant_zps3ka0zhxg.png~original

It still has other DNS in there try: 8.8.8.8 

If that does not work see if you can get to pool via ip.  Let me know how it goes.
It will not let me put in 8.8.8.8   
legendary
Activity: 1456
Merit: 1000
July 22, 2015, 04:26:05 AM
#8
How do I get a S1 to mine on the network cord? I can only get it to mine on the WiFi?  I changed the Network settings to my router like it said in the guides but will only mine when the Wifi is turned on? I would rather have it mine hard wired to the router. ty!

Can you tell us a little about your network on IP and settings? And then post the LAN settings via a pic on here.

That will help a lot.


The settings r,  

IPv4 netmask  255.255.255.0

IPv4 gateway  192.168.1.1

IPv4 broadcast  192.168.1.255

Use custom DNS servers  192.168.1.1

 It is set to  STATIC addy




Change DNS to 8.8.8.8 (googls DNS).   Is your router giving out 192.168.1.X numbers?

If so try ip of pool and see if that makes any difference.  Also instead of typing next time try screen shot as mentioned Smiley
Change DNS in the router or the Miner?   Yes the Router is showing them numbers. 192.168.1.1

As I asked before can you please take a screenshot of your network page?  A screenshot not words Smiley
http://i120.photobucket.com/albums/o194/captron421/ant_zps3ka0zhxg.png~original

It still has other DNS in there try: 8.8.8.8 

If that does not work see if you can get to pool via ip.  Let me know how it goes.
sr. member
Activity: 616
Merit: 250
July 22, 2015, 04:14:48 AM
#7
How do I get a S1 to mine on the network cord? I can only get it to mine on the WiFi?  I changed the Network settings to my router like it said in the guides but will only mine when the Wifi is turned on? I would rather have it mine hard wired to the router. ty!

Can you tell us a little about your network on IP and settings? And then post the LAN settings via a pic on here.

That will help a lot.


The settings r,  

IPv4 netmask  255.255.255.0

IPv4 gateway  192.168.1.1

IPv4 broadcast  192.168.1.255

Use custom DNS servers  192.168.1.1

 It is set to  STATIC addy




Change DNS to 8.8.8.8 (googls DNS).   Is your router giving out 192.168.1.X numbers?

If so try ip of pool and see if that makes any difference.  Also instead of typing next time try screen shot as mentioned Smiley
Change DNS in the router or the Miner?   Yes the Router is showing them numbers. 192.168.1.1

As I asked before can you please take a screenshot of your network page?  A screenshot not words Smiley
http://i120.photobucket.com/albums/o194/captron421/ant_zps3ka0zhxg.png~original
legendary
Activity: 1456
Merit: 1000
July 22, 2015, 01:40:43 AM
#6
How do I get a S1 to mine on the network cord? I can only get it to mine on the WiFi?  I changed the Network settings to my router like it said in the guides but will only mine when the Wifi is turned on? I would rather have it mine hard wired to the router. ty!

Can you tell us a little about your network on IP and settings? And then post the LAN settings via a pic on here.

That will help a lot.


The settings r,  

IPv4 netmask  255.255.255.0

IPv4 gateway  192.168.1.1

IPv4 broadcast  192.168.1.255

Use custom DNS servers  192.168.1.1

 It is set to  STATIC addy




Change DNS to 8.8.8.8 (googls DNS).   Is your router giving out 192.168.1.X numbers?

If so try ip of pool and see if that makes any difference.  Also instead of typing next time try screen shot as mentioned Smiley
Change DNS in the router or the Miner?   Yes the Router is showing them numbers. 192.168.1.1

As I asked before can you please take a screenshot of your network page?  A screenshot not words Smiley
sr. member
Activity: 616
Merit: 250
July 22, 2015, 12:07:58 AM
#5
How do I get a S1 to mine on the network cord? I can only get it to mine on the WiFi?  I changed the Network settings to my router like it said in the guides but will only mine when the Wifi is turned on? I would rather have it mine hard wired to the router. ty!

Can you tell us a little about your network on IP and settings? And then post the LAN settings via a pic on here.

That will help a lot.


The settings r,  

IPv4 netmask  255.255.255.0

IPv4 gateway  192.168.1.1

IPv4 broadcast  192.168.1.255

Use custom DNS servers  192.168.1.1

 It is set to  STATIC addy




Change DNS to 8.8.8.8 (googls DNS).   Is your router giving out 192.168.1.X numbers?

If so try ip of pool and see if that makes any difference.  Also instead of typing next time try screen shot as mentioned Smiley
Change DNS in the router or the Miner?   Yes the Router is showing them numbers. 192.168.1.1
legendary
Activity: 1456
Merit: 1000
July 21, 2015, 06:42:26 PM
#4
How do I get a S1 to mine on the network cord? I can only get it to mine on the WiFi?  I changed the Network settings to my router like it said in the guides but will only mine when the Wifi is turned on? I would rather have it mine hard wired to the router. ty!

Can you tell us a little about your network on IP and settings? And then post the LAN settings via a pic on here.

That will help a lot.


The settings r,   

IPv4 netmask  255.255.255.0

IPv4 gateway  192.168.1.1

IPv4 broadcast  192.168.1.255

Use custom DNS servers  192.168.1.1

 It is set to  STATIC addy




Change DNS to 8.8.8.8 (googls DNS).   Is your router giving out 192.168.1.X numbers?

If so try ip of pool and see if that makes any difference.  Also instead of typing next time try screen shot as mentioned Smiley
sr. member
Activity: 616
Merit: 250
July 21, 2015, 03:30:13 PM
#3
How do I get a S1 to mine on the network cord? I can only get it to mine on the WiFi?  I changed the Network settings to my router like it said in the guides but will only mine when the Wifi is turned on? I would rather have it mine hard wired to the router. ty!

Can you tell us a little about your network on IP and settings? And then post the LAN settings via a pic on here.

That will help a lot.


The settings r,   

IPv4 netmask  255.255.255.0

IPv4 gateway  192.168.1.1

IPv4 broadcast  192.168.1.255

Use custom DNS servers  192.168.1.1

 It is set to  STATIC addy


legendary
Activity: 1456
Merit: 1000
July 21, 2015, 03:29:36 AM
#2
How do I get a S1 to mine on the network cord? I can only get it to mine on the WiFi?  I changed the Network settings to my router like it said in the guides but will only mine when the Wifi is turned on? I would rather have it mine hard wired to the router. ty!

Can you tell us a little about your network on IP and settings? And then post the LAN settings via a pic on here.

That will help a lot.
sr. member
Activity: 616
Merit: 250
July 21, 2015, 03:08:29 AM
#1
How do I get a S1 to mine on the network cord? I can only get it to mine on the WiFi?  I changed the Network settings to my router like it said in the guides but will only mine when the Wifi is turned on? I would rather have it mine hard wired to the router. ty!
Jump to: