Author

Topic: How to mine RVN ? - I have Raveos (Read 132 times)

legendary
Activity: 1834
Merit: 1136
November 03, 2022, 10:50:42 AM
#9
In a bear market, the worst algorithm anyone can mine are those that consume lots of power for example kawpow algorithm, since this same algorithm is what ravencoin is currently using I have to warn you, do not mine ravencoin, mine Flux or other.
This is already a question for the mining calculator.
On cold video cards, you can mine any coin, on hot video cards you will need closed cases with additional cooling. But winter is coming and an open window is enough to cool 5-10 mining farms, so you can mine the most profitable coin.
member
Activity: 201
Merit: 31
KUWA.ai
November 03, 2022, 01:44:36 AM
#8
In a bear market, the worst algorithm anyone can mine are those that consume lots of power for example kawpow algorithm, since this same algorithm is what ravencoin is currently using I have to warn you, do not mine ravencoin, mine Flux or other.
hero member
Activity: 910
Merit: 680
November 02, 2022, 11:03:54 PM
#7
Personally I never mine with Raveos, so I can't comment what's the problem you faced during installation and set up your mining rigs. But there's few tutorials that you can follow to set up Raveos correctly, especially there's a video where the channel use Raveos to mine Ravencoin.

1. https://rvn.2miners.com/help2
2. https://2miners.com/blog/how-to-mine-on-raveos-detailed-guide-and-mining-setup/
3. https://www.youtube.com/watch?v=FECnB-tQYTM

You could contact their telegram or customer service about your problem too https://raveos.com/help.html
legendary
Activity: 2450
Merit: 1472
November 02, 2022, 09:03:58 PM
#6
Can you provide more info about your hardware and symptons?

Hard to guess what's the problem with lack of informartion

Post here about your PSU, GPUs, motherboard, if you're doing overclock, your settings and signals that your hardware is giving when restarts.
member
Activity: 127
Merit: 10
October 30, 2022, 05:38:25 PM
#5
unfortunately I can't guide you because I have been mining with nvidia for many years.
newbie
Activity: 2
Merit: 0
October 30, 2022, 01:39:05 PM
#4
kawpow algo has high power consumption. hangs and restarts the system because it cannot provide enough power to the graphics cards. lower the clocks of the cards to 3/4 as well as the millivolt voltage.

thanks . is there any guide to guide me what to do ?

Check out this guide
How to Mine on RaveOS: Detailed Guide and Mining Setup
https://2miners.com/blog/how-to-mine-on-raveos-detailed-guide-and-mining-setup/
Raveos is a very easy system to set up. I connect the monitor and see how the miner works.
Common reasons for a reboot would be overclocking or low power limit. First, start the system on default settings.
If you have not done technical listening, then clean all the raisers and contacts of the video card.

thanks ill try
legendary
Activity: 1834
Merit: 1136
October 30, 2022, 07:48:39 AM
#3
Check out this guide
How to Mine on RaveOS: Detailed Guide and Mining Setup
https://2miners.com/blog/how-to-mine-on-raveos-detailed-guide-and-mining-setup/
Raveos is a very easy system to set up. I connect the monitor and see how the miner works.
Common reasons for a reboot would be overclocking or low power limit. First, start the system on default settings.
If you have not done maintenance, then clean all the raisers and contacts of the video card.
member
Activity: 127
Merit: 10
October 29, 2022, 08:28:44 AM
#2
kawpow algo has high power consumption. hangs and restarts the system because it cannot provide enough power to the graphics cards. lower the clocks of the cards to 3/4 as well as the millivolt voltage.
newbie
Activity: 2
Merit: 0
October 28, 2022, 09:54:18 AM
#1
The rig is rebooting itself ... and I dont know why.
 I set the wallet and everything on, raveos:

 Miner: T-rex 0.26.8
, pool : 2miners ,
 adress,

and it still keep rebooting itself.

if there is any guide to help me with that
maybe the tunning section has a problem
i dont know

please help
Jump to: