Author

Topic: How to repair bricked/corrupted flash drive ? (Read 240 times)

legendary
Activity: 2394
Merit: 5531
Self-proclaimed Genius
-snip-
You've posted a plagiarized contents from: ugetfix.com just to answer an inactive thread from June 2018.

Reported for plagiarism (reference link above).
jr. member
Activity: 44
Merit: 18
This will fix it under windows. It will remove all unwanted partition layouts.
Easy.

https://filehippo.com/download_hp_usb_disk_storage_format_tool/
sr. member
Activity: 574
Merit: 272
⭐⭐⭐⭐⭐
You can do the Low-level formatting (low-level format) to your FDD. I use Low-Level Format Tool called HDD LLF (from HDDGURU) that always working good (at least for me)  Wink

This tool has saved a few of my FDD and HDD  Cheesy

http://hddguru.com/software/HDD-LLF-Low-Level-Format-Tool/
hero member
Activity: 1036
Merit: 606
Try SD Formatter it's the official utility of the SD Association and the best way to format a SD card. It's restored corrupt drives for me.

https://www.sdcard.org/downloads/formatter_4/
jr. member
Activity: 252
Merit: 8
Step 1: run CMD as admin
Step 2: enter diskpart, type: diskpart  
Step 3: (assumes you got into diskpart)   type: list disk
Step 4: select the "bricked" drive, type: select disk + the disk number  (1,2,3,w.e)  i.e  "select disk 2"
Step 5: (assumes you now have your "bricked"  drive selected)  type: clean
Step 6: type: create partition primary
step 7: type: format fs=ntfs   (or w.e format you want the drive) . this will take a bit, have a coffee.
Step 8: type: assign  (this assigns a drive letter and mount point)
step 9: exit diskpart, type: exit

the drive should now be 100% usable again!


luckily im bored right now and had time to type that Tongue


Thanks. But i have already tried most of these. When i type clean it says: Unable to format disk: 'The system cannot find the file specified' then it does not show the flash drive in List Disk. I have to remove it and insert it again to view it in List Disk.
legendary
Activity: 1820
Merit: 1092
~Full-Time Minter since 2016~
If Diskpart wont fix them they prob really are bricked but try these steps Smiley  ive never had Hive brick a disk i couldn't unlock using this method

Step 1: run CMD as admin
Step 2: enter diskpart, type: diskpart  
Step 3: (assumes you got into diskpart)   type: list disk
Step 4: select the "bricked" drive, type: select disk + the disk number  (1,2,3,w.e)  i.e  "select disk 2"
Step 5: (assumes you now have your "bricked"  drive selected)  type: clean
Step 6: type: create partition primary
step 7: type: format fs=ntfs   (or w.e format you want the drive) . this will take a bit, have a coffee.
Step 8: type: assign  (this assigns a drive letter and mount point)
step 9: exit diskpart, type: exit

the drive should now be 100% usable again!
jr. member
Activity: 252
Merit: 8
i have three flash drives which I bricked over the time by burning HiveOS on them. Any ideas how to repair them ? I have tried Diskpart and EaseUS Partition Master but the flash drives just ejects.
Jump to: