Topic: How to repair s9 miner that rebooting? (Read 277 times)
Make sure you don't have a dead ethernet cable. I've had this boot loop happen a few times and it just ended up being a bad ethernet cable causing the miner to just keep restarting. The cables I bought weren't the best quality and I've had it happen more than once. Check the lights around your ethernet port and make sure they are lighting up.
If you were sold a used miner that's not working, especially if you think he is a scammer, I would recommend that you try a working control board to see if that fixes your problem.
Indeed, first determine what the cause of the problem is. Try with another control board, or another PSU from a working S9.
Also, disconnect the Asic boards see if it doesn't reboot, then try connecting one by one only one board at a time, then two.
Just came back here but the result for flashing the s9 with sd card seems not working. Done cleaning the miner but the problem still there.
What to do next? Help please. The man who sell this I can't contact him it seems he is scammer?
What to do next? Help please. The man who sell this I can't contact him it seems he is scammer?
If you were sold a used miner that's not working, especially if you think he is a scammer, I would recommend that you try a working control board to see if that fixes your problem.
Thanks for the help and let me try the flashing method first and if it does work well thanks if not im going to cleaning procedure.
Thanks
Thanks
Just came back here but the result for flashing the s9 with sd card seems not working. Done cleaning the miner but the problem still there.
What to do next? Help please. The man who sell this I can't contact him it seems he is scammer?
Do you think it's because of the temperature issue?
Maybe yes, maybe not but before you go to hardware issue try to fully flash the control board first with SD card you can check this post https://bitcointalksearch.org/topic/m.49810850
If reflashing with SD card doesn't work and the result still the same. You bought a stuck miner or old miner with full of dirt.
If that's the case you must disassemble the miner and remove all dirt with the blower or use a clean and dry brush to remove the dirt.
No the dashboard won't work.
I tried to reset and follow the guide from your link but seems not working.
The fan is running then stop then running again without removing it to power source.
https://support.bitmain.com/hc/en-us/articles/220872007-Possible-problems-and-solutions-for-S7-S9-fixed-frequency-L3-
Got little idea from the link above the number 16 seems near the same as my miners problem.
Do you think it's because of the temperature issue?
I tried to reset and follow the guide from your link but seems not working.
The fan is running then stop then running again without removing it to power source.
https://support.bitmain.com/hc/en-us/articles/220872007-Possible-problems-and-solutions-for-S7-S9-fixed-frequency-L3-
Got little idea from the link above the number 16 seems near the same as my miners problem.
Do you think it's because of the temperature issue?
Can you still access the dashboard?
Can you try to hard reset the miner first and maybe it can fix the issue. You can follow the guides on how to reset the antminer s9 from the link below.
- Three Ways to Restore Factory Settings (R4/S9/T9)
Also, check this troubleshooting guide from here Possible problems and solutions for S7, S9 & L3+
Then let us update here if your problem solved.
Can you try to hard reset the miner first and maybe it can fix the issue. You can follow the guides on how to reset the antminer s9 from the link below.
- Three Ways to Restore Factory Settings (R4/S9/T9)
Also, check this troubleshooting guide from here Possible problems and solutions for S7, S9 & L3+
Then let us update here if your problem solved.
Hello i found this website in google and I cant find solution to repair my s9 bought it 2nd hand from someone here in my country.
I just wanted to ask if how to repair s9 miner bootloop or it keeps restarting.
I just wanted to ask if how to repair s9 miner bootloop or it keeps restarting.
Jump to: