Like tanoury said make sure your worker is set up.
This worked for my Gaw's (not mining anymore as my PSU went out on me). I was using cgminer 4.3.5 also. Also make sure you installed the CDM drivers if you have not yet. I use Windows 7 64 bit.
cgminer.exe --scrypt -o stratum+tcp://POOL:PORT -u WORKER -p PASSWORD --zeus-chips 6 --zeus-clock 328
Topic: How To Setup Gaw Miner Fury/Zeus Blizzard 1.3Mh/s? (Read 1830 times)
Make sure your worker is set-up for the pool that you are mining. See your pool's My Account/My Workers page.
I'm using cgminer 4.3.5 built with Zeus scrypt mining support for my Gaw Miner. Here is my (Linux) command line:
./cgminer --scrypt -S /dev/ttyUSB0 --zeus-options "/dev/ttyUSB0,6,328" -o stratum+tcp://scrypt.usa.nicehash.com:3333 -u yourpoolworkersname -p yourpoolworkerspassword --no-submit-stale
I'm using cgminer 4.3.5 built with Zeus scrypt mining support for my Gaw Miner. Here is my (Linux) command line:
./cgminer --scrypt -S /dev/ttyUSB0 --zeus-options "/dev/ttyUSB0,6,328" -o stratum+tcp://scrypt.usa.nicehash.com:3333 -u yourpoolworkersname -p yourpoolworkerspassword --no-submit-stale
Hello,
I recently bought a Gaw Miner fury (same - Zeus Blizzard)
I use Asic config start V2 to setup the miner on Cgminer.. i tried more than 5 pools to mine...
But the thing is, it always says;
2016-02-06 20:57:00] Started cgminer 3.1.1
[2016-02-06 20:57:04] Probing for an alive pool
[2016-02-06 20:57:05] pool 0 JSON stratum auth failed: [
24,
"Unauthorized worker",
null
]
I recently bought a Gaw Miner fury (same - Zeus Blizzard)
I use Asic config start V2 to setup the miner on Cgminer.. i tried more than 5 pools to mine...
But the thing is, it always says;
2016-02-06 20:57:00] Started cgminer 3.1.1
[2016-02-06 20:57:04] Probing for an alive pool
[2016-02-06 20:57:05] pool 0 JSON stratum auth failed: [
24,
"Unauthorized worker",
null
]
Jump to: