Topic: [HowTo] Ubuntu 11.04 Desktop 32-bit mining install guide (Read 14722 times)
Seems these scripts does not work anymore. Ubuntu does not have aptitude and driver installation fails :-(
is there any advantage to running 64bit for mining?
In the section:
## Installing the ATI Linux 32-bit Drivers (version 11.5)
Does this build the 11.5 driver or does it build the driver of the card for the system it's built on?
I built this on a system I don't intend it for, that has an x1950. It used an AMD 8.861 to build, ??fglrx_8.861??.deb. Was planning on just copying the .deb over to the other system.
## Installing the ATI Linux 32-bit Drivers (version 11.5)
Code:
wget http://www2.ati.com/drivers/linux/ati-driver-installer-11-5-x86.x86_64.run
sudo sh ati-driver-installer-11-5-x86.x86_64.run --buildpkg Ubuntu/natty
Does this build the 11.5 driver or does it build the driver of the card for the system it's built on?
I built this on a system I don't intend it for, that has an x1950. It used an AMD 8.861 to build, ??fglrx_8.861??.deb. Was planning on just copying the .deb over to the other system.
sr. member
Activity: 266
Merit: 250
The king and the pawn go in the same box @ endgame
edit:
## Installing python-jsonrpc
Code:
cd ~
svn checkout http://svn.json-rpc.org/trunk/python-jsonrpc
cd python-jsonrpc/
sudo python setup.py install
An error is thrown when trying to connect to the url. upon manually checking the url in browser, confirmed that link is dead. I am going to try installing from the instructions at this url and let every one know the results.
http://json-rpc.org/wiki/python-json-rpc
## Installing python-jsonrpc
Code:
cd ~
svn checkout http://svn.json-rpc.org/trunk/python-jsonrpc
cd python-jsonrpc/
sudo python setup.py install
An error is thrown when trying to connect to the url. upon manually checking the url in browser, confirmed that link is dead. I am going to try installing from the instructions at this url and let every one know the results.
http://json-rpc.org/wiki/python-json-rpc
Great guide. helped a ton.
I had 1 problem at the end when trying to run phoenix. I kept getting
Traceback (most recent call last):
File "./phoenix.py", line 123, in
miner.start(options)
File "/home/shelbydz/phoenix-1.48/Miner.py", line 75, in start
self.kernel = self.options.makeKernel(KernelInterface(self))
File "./phoenix.py", line 111, in makeKernel
kernelModule = imp.load_module(module, file, filename, smt)
File "kernels/phatk/__init__.py", line 23, in
import pyopencl as cl
File "/usr/local/lib/python2.7/dist-packages/pyopencl-0.92-py2.7-linux-i686.egg/pyopencl/__init__.py", line 3, in
import pyopencl._cl as _cl
ImportError: libOpenCL.so.1: cannot open shared object file: No such file or directory
Everything built fine and installed fine. Doing research, it SEEMs that phoenix cannot find my SDK Library (which is exactly what is entered above). Any thoughts? I spent all night on this? I was able to get poclbm running (and at the same hash rate as before, so I'm pleased for now).
thanks for the great guide and the help.
I had 1 problem at the end when trying to run phoenix. I kept getting
Traceback (most recent call last):
File "./phoenix.py", line 123, in
miner.start(options)
File "/home/shelbydz/phoenix-1.48/Miner.py", line 75, in start
self.kernel = self.options.makeKernel(KernelInterface(self))
File "./phoenix.py", line 111, in makeKernel
kernelModule = imp.load_module(module, file, filename, smt)
File "kernels/phatk/__init__.py", line 23, in
import pyopencl as cl
File "/usr/local/lib/python2.7/dist-packages/pyopencl-0.92-py2.7-linux-i686.egg/pyopencl/__init__.py", line 3, in
import pyopencl._cl as _cl
ImportError: libOpenCL.so.1: cannot open shared object file: No such file or directory
Everything built fine and installed fine. Doing research, it SEEMs that phoenix cannot find my SDK Library (which is exactly what is entered above). Any thoughts? I spent all night on this? I was able to get poclbm running (and at the same hash rate as before, so I'm pleased for now).
thanks for the great guide and the help.
has anyone had experience running poclbm-mod? https://en.bitcoin.it/wiki/Poclbm-mod - and if so, does anyone know if it works with any pool?
any increase from windows to linux on hashs?
I pretty much run Linux exclusively, so I cant speak from personal experience. However, I have read reports that Linux does give a few extra Mhps.
Why do you recommend poclbm instead of phoenix?
I've found poclbm to give less stales and therefore better performance.
First off, thank you a TON for writing this Joema. Sent a small donation your way.
This is by far the best guide from starting this stuff from scratch that I've seen.
This is by far the best guide from starting this stuff from scratch that I've seen.
Thank you for the great feedback and donation
Code:
1. echo export AMDAPPSDKROOT=${HOME}/AMD-APP-SDK-v2.4-lnx32/ >> ~/.bashrc
2. echo export AMDAPPSDKSAMPLESROOT=${HOME}/AMD-APP-SDK-v2.4-lnx32/ >> ~/.bashrc
3. echo 'export LD_LIBRARY_PATH=${AMDAPPSDKROOT}lib/x86:${LD_LIBRARY_PATH}' >> ~/.bashrc
where the variable AMDAPPSDKROOT doesn't get used for lines 2/3 (it just places AMDAPPSDKROOT in plain-text).
I think I found the problem. It had to do with the single quotes in line 3 that caused issues. When I get a chance I will test the new instructions.
2. If you are building a system from scratch, before installing ubuntu, make sure you have installed ALL of your graphics cards on your motherboard first. Otherwise you're going to run into some mess dealing with an xorg.conf file thing to get subsequently added cards up and running. Took my friends and I forever to figure that one out!
Thanks for this. I'll add it to the original post so it doesnt get lost.
any increase from windows to linux on hashs?
Why do you recommend poclbm instead of phoenix?
First off, thank you a TON for writing this Joema. Sent a small donation your way.
This is by far the best guide from starting this stuff from scratch that I've seen.
I want to add some notes, pseudo-corrections however.
1. Not being super well versed in linux, we found the following lines problematic:
where the variable AMDAPPSDKROOT doesn't get used for lines 2/3 (it just places AMDAPPSDKROOT in plain-text).
Your bashrc file should actually look like this: http://dl.dropbox.com/u/77754/bashrc (where "boss" is your user name).
2. If you are building a system from scratch, before installing ubuntu, make sure you have installed ALL of your graphics cards on your motherboard first. Otherwise you're going to run into some mess dealing with an xorg.conf file thing to get subsequently added cards up and running. Took my friends and I forever to figure that one out!
This is by far the best guide from starting this stuff from scratch that I've seen.
I want to add some notes, pseudo-corrections however.
1. Not being super well versed in linux, we found the following lines problematic:
Code:
1. echo export AMDAPPSDKROOT=${HOME}/AMD-APP-SDK-v2.4-lnx32/ >> ~/.bashrc
2. echo export AMDAPPSDKSAMPLESROOT=${HOME}/AMD-APP-SDK-v2.4-lnx32/ >> ~/.bashrc
3. echo 'export LD_LIBRARY_PATH=${AMDAPPSDKROOT}lib/x86:${LD_LIBRARY_PATH}' >> ~/.bashrc
where the variable AMDAPPSDKROOT doesn't get used for lines 2/3 (it just places AMDAPPSDKROOT in plain-text).
Your bashrc file should actually look like this: http://dl.dropbox.com/u/77754/bashrc (where "boss" is your user name).
2. If you are building a system from scratch, before installing ubuntu, make sure you have installed ALL of your graphics cards on your motherboard first. Otherwise you're going to run into some mess dealing with an xorg.conf file thing to get subsequently added cards up and running. Took my friends and I forever to figure that one out!
Wow awesome. How do I run the scripts?
from a terminal window run:
Code:
/bin/bash step1.sh
then after the reboot:
Code:
/bin/bash step2.sh
Wow awesome. How do I run the scripts?
Here are 2 scripts that complete this install as described above. They have been tested, but YMMV
step1.sh
step2.sh
Found this useful, please consider a donation 1GGFpiLb9TVUGHK2qdd1xDbp8RwtBkaHDM
step1.sh
Code:
#!/bin/bash
echo ""
echo "##### Preparing the environment for installation #####"
echo ""
sudo apt-get update -y
sudo apt-get install python-setuptools python-numpy subversion g++ libboost-all-dev libqtgui4 openntpd -y
echo ""
echo "##### Install the ATI Linux 32-bit Drivers (version 11.5) #####"
echo ""
cd ~
sudo aptitude install dkms -y
wget -c http://www2.ati.com/drivers/linux/ati-driver-installer-11-5-x86.x86_64.run
sudo sh ati-driver-installer-11-5-x86.x86_64.run --buildpkg Ubuntu/natty
sudo dpkg -i *.deb
sudo apt-get -f install
sudo aticonfig -f --initial --adapter=all
#sudo reboot
echo ""
echo ""
echo "This part of the installation is now complete. Please reboot the system before continuing."
echo ""
echo "You can accomplish this by issuing the command 'sudo reboot'"
echo ""
echo ""
step2.sh
Code:
#!/bin/bash
echo ""
echo "##### Install the AMD Stream 32-bit SDK (version 2.4) #####"
echo ""
cd ~
wget -c http://download2-developer.amd.com/amd/APPSDK/AMD-APP-SDK-v2.4-lnx32.tgz
tar xvzf AMD-APP-SDK-v2.4-lnx32.tgz
echo export AMDAPPSDKROOT=${HOME}/AMD-APP-SDK-v2.4-lnx32/ >> ~/.bashrc
echo export AMDAPPSDKSAMPLESROOT=${HOME}/AMD-APP-SDK-v2.4-lnx32/ >> ~/.bashrc
echo export LD_LIBRARY_PATH=${AMDAPPSDKROOT}lib/x86:${LD_LIBRARY_PATH} >> ~/.bashrc
source ~/.bashrc
sudo tar xvfz $AMDAPPSDKROOT/icd-registration.tgz -C /
echo ""
echo "##### Install pyopencl (0.92) #####"
echo ""
cd ~
wget -c http://pypi.python.org/packages/source/p/pyopencl/pyopencl-0.92.tar.gz
tar xzvf pyopencl-0.92.tar.gz
cd pyopencl-0.92
./configure.py --cl-inc-dir=${AMDAPPSDKROOT}include/ --cl-lib-dir=${AMDAPPSDKROOT}lib/x86/
make
sudo make install
echo ""
echo "##### Install python-jsonrpc #####"
echo ""
cd ~
svn checkout http://svn.json-rpc.org/trunk/python-jsonrpc
cd python-jsonrpc/
sudo python setup.py install
echo ""
echo "##### poclbm (recommended) #####"
echo ""
cd ~
sudo apt-get install git-core -y
git clone git://github.com/m0mchil/poclbm poclbm
chmod +x poclbm/poclbm.py
Found this useful, please consider a donation 1GGFpiLb9TVUGHK2qdd1xDbp8RwtBkaHDM
Yea I see that the it's 32-bit install working too. I see that the two have vastly different commands. Why is that?
Anyway how do I write a script and run ? I'd like to try doing it
Anyway how do I write a script and run ? I'd like to try doing it
Hi, is it possible to do all in one boot? Or do you have to reboot? I'm trying to get this to run as a script. I might be building 2 more rigs and I've never run Linux nor wrote scripts before -.-
I've never tried doing it without a reboot.
One thing I don't like about scripts is that if there is an error the screen may whizz-by too fast which could leave you with a machine that doesnt want to boot or you with less hair from trying to figure out why something isnt working the way it should. In any case, you should be able to just copy/paste the large majority of the instructions.
This worked for me! Mining at full hasrates on t 5850's
I had a sneaking suspicion it would
I have a questions. When we installed AMD Stream, did the commands actually install that in the home dir of the current user?
Yip, AMD stream is installed to the users home dir. This wont be a problem for single user systems, which I assumed would the vast majority.
Hi, is it possible to do all in one boot? Or do you have to reboot? I'm trying to get this to run as a script. I might be building 2 more rigs and I've never run Linux nor wrote scripts before -.-
This worked for me! Mining at full hasrates on t 5850's
I have a questions. When we installed AMD Stream, did the commands actually install that in the home dir of the current user?
I am just a little confused at the tar locations and the exports I guess.
I have a questions. When we installed AMD Stream, did the commands actually install that in the home dir of the current user?
Quote
## Installing the AMD Stream 32-bit SDK (version 2.4)
cd ~
wget http://download2-developer.amd.com/amd/APPSDK/AMD-APP-SDK-v2.4-lnx32.tgz
tar xvzf AMD-APP-SDK-v2.4-lnx32.tgz
echo export AMDAPPSDKROOT=${HOME}/AMD-APP-SDK-v2.4-lnx32/ >> ~/.bashrc
echo export AMDAPPSDKSAMPLESROOT=${HOME}/AMD-APP-SDK-v2.4-lnx32/ >> ~/.bashrc
echo 'export LD_LIBRARY_PATH=${AMDAPPSDKROOT}lib/x86:${LD_LIBRARY_PATH}' >> ~/.bashrc
source ~/.bashrc
sudo tar xvfz $AMDAPPSDKROOT/icd-registration.tgz -C /
cd ~
wget http://download2-developer.amd.com/amd/APPSDK/AMD-APP-SDK-v2.4-lnx32.tgz
tar xvzf AMD-APP-SDK-v2.4-lnx32.tgz
echo export AMDAPPSDKROOT=${HOME}/AMD-APP-SDK-v2.4-lnx32/ >> ~/.bashrc
echo export AMDAPPSDKSAMPLESROOT=${HOME}/AMD-APP-SDK-v2.4-lnx32/ >> ~/.bashrc
echo 'export LD_LIBRARY_PATH=${AMDAPPSDKROOT}lib/x86:${LD_LIBRARY_PATH}' >> ~/.bashrc
source ~/.bashrc
sudo tar xvfz $AMDAPPSDKROOT/icd-registration.tgz -C /
I am just a little confused at the tar locations and the exports I guess.
Thanks for the guide. Going to try this on a fresh install.
To start GPU Bitcoin mining the following steps need to be completed:
Preparing the environment for installation.
Install the ATI Linux 32-bit Drivers (version 11.5)
Install the AMD Stream 32-bit SDK (version 2.4)
Install pyopencl (0.92)
Install python-jsonrpc
Install a Bitcoin client:
- poclbm (recommended)
- phoenix (version 1.48)
## Preparing the environment for installation.
A default installation of Ubuntu 11.04 32-bit is recommended.
Once installation is successful, and the system has been rebooted by the installer, login in and open a terminal window (Applications -> Accessories -> Terminal). Type or copy/paste the following:
## Installing the ATI Linux 32-bit Drivers (version 11.5)
After the system has rebooted, login in and open a terminal window (Applications -> Accessories -> Terminal). Type or copy/paste the following:
## Verify installation of ATI drivers
## Installing the AMD Stream 32-bit SDK (version 2.4)
## Verify installation of OpenCL
## Installing pyopencl-0.92
## Installing python-jsonrpc
## Installing a Bitcoin client (pick one of the following):
## Installing poclbm (recommended)
## Verify poclbm is installed correctly
You should see you GPU and CPU listed here, i.e.
Note: The number in square brackets ([]) is the device id.
To start mining with poclbm (in a pool), you can try these settings:
## Installing phoenix (version 1.48)
To start mining with phoenix (in a pool), you can try these settings:
------
Some gotchas:
If you made us of this guide please send a donation to 1GGFpiLb9TVUGHK2qdd1xDbp8RwtBkaHDM
Preparing the environment for installation.
Install the ATI Linux 32-bit Drivers (version 11.5)
Install the AMD Stream 32-bit SDK (version 2.4)
Install pyopencl (0.92)
Install python-jsonrpc
Install a Bitcoin client:
- poclbm (recommended)
- phoenix (version 1.48)
## Preparing the environment for installation.
A default installation of Ubuntu 11.04 32-bit is recommended.
Once installation is successful, and the system has been rebooted by the installer, login in and open a terminal window (Applications -> Accessories -> Terminal). Type or copy/paste the following:
Code:
cd ~
sudo apt-get update
sudo apt-get install python-setuptools python-numpy subversion g++ libboost-all-dev libqtgui4 openntpd
## Installing the ATI Linux 32-bit Drivers (version 11.5)
Code:
cd ~
sudo aptitude install dkms
wget http://www2.ati.com/drivers/linux/ati-driver-installer-11-5-x86.x86_64.run
sudo sh ati-driver-installer-11-5-x86.x86_64.run --buildpkg Ubuntu/natty
sudo dpkg -i *.deb
sudo apt-get -f install
sudo aticonfig -f --initial --adapter=all
sudo reboot
After the system has rebooted, login in and open a terminal window (Applications -> Accessories -> Terminal). Type or copy/paste the following:
## Verify installation of ATI drivers
Code:
cd ~
DISPLAY=:0 sudo fglrxinfo
## Installing the AMD Stream 32-bit SDK (version 2.4)
Code:
cd ~
wget http://download2-developer.amd.com/amd/APPSDK/AMD-APP-SDK-v2.4-lnx32.tgz
tar xvzf AMD-APP-SDK-v2.4-lnx32.tgz
echo export AMDAPPSDKROOT=${HOME}/AMD-APP-SDK-v2.4-lnx32/ >> ~/.bashrc
echo export AMDAPPSDKSAMPLESROOT=${HOME}/AMD-APP-SDK-v2.4-lnx32/ >> ~/.bashrc
echo export LD_LIBRARY_PATH=${AMDAPPSDKROOT}lib/x86:${LD_LIBRARY_PATH} >> ~/.bashrc
source ~/.bashrc
sudo tar xvfz $AMDAPPSDKROOT/icd-registration.tgz -C /
## Verify installation of OpenCL
Code:
cd ~/AMD-APP-SDK-v2.4-lnx32/bin/x86
./clinfo
## Installing pyopencl-0.92
Code:
cd ~
wget http://pypi.python.org/packages/source/p/pyopencl/pyopencl-0.92.tar.gz
tar xzvf pyopencl-0.92.tar.gz
cd pyopencl-0.92
./configure.py --cl-inc-dir=${AMDAPPSDKROOT}include/ --cl-lib-dir=${AMDAPPSDKROOT}lib/x86/
make
sudo make install
## Installing python-jsonrpc
Code:
cd ~
svn checkout http://svn.json-rpc.org/trunk/python-jsonrpc
cd python-jsonrpc/
sudo python setup.py install
## Installing a Bitcoin client (pick one of the following):
## Installing poclbm (recommended)
Code:
cd ~
sudo apt-get install git-core
git clone git://github.com/m0mchil/poclbm poclbm
chmod +x poclbm/poclbm.py
## Verify poclbm is installed correctly
Code:
cd ~
chmod +x poclbm/poclbm.py
cd poclbm/
./poclbm.py
You should see you GPU and CPU listed here, i.e.
Code:
[0] Juniper << --- your GPU
[1] Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz << --- your CPU
Note: The number in square brackets ([]) is the device id.
To start mining with poclbm (in a pool), you can try these settings:
Code:
./poclbm.py -d--host= --port= --user= --pass= -v -w128 -f 1
## Installing phoenix (version 1.48)
Code:
cd ~
wget http://svn3.xp-dev.com/svn/phoenix-miner/files/phoenix-1.48.tar.bz2
tar -jxvf phoenix*.bz2
chmod +x phoenix-1.48/phoenix.py
To start mining with phoenix (in a pool), you can try these settings:
Code:
phoenix-1.48/phoenix.py -u http://: @ : -q 5 -k phatk VECTORS BFI_INT FASTLOOP AGGRESSION=4 DEVICE= WORKSIZE=128
Some gotchas:
2. If you are building a system from scratch, before installing ubuntu, make sure you have installed ALL of your graphics cards on your motherboard first. Otherwise you're going to run into some mess dealing with an xorg.conf file thing to get subsequently added cards up and running. Took my friends and I forever to figure that one out!
If you made us of this guide please send a donation to 1GGFpiLb9TVUGHK2qdd1xDbp8RwtBkaHDM
Jump to: