Topic: I cant get stratum to work,help (Read 16962 times)
I can't seem to get stratum to work consistently using only guiminer (currently v2012-12-03). I still have to use the mining proxy to guarantee that I'll connect to a pool using stratum.
so...is this issue myself and others are having too difficult to figure out? is it too simple to explain how to fix it?
Just asking for a little help, even if its that we are S.O.L.
Just asking for a little help, even if its that we are S.O.L.
Guiminer connects automaticatly to stratum...
(please correct me if i'm wrong)
(please correct me if i'm wrong)
Quote
2013-03-03 18:52:40: Listener for "***********" started
2013-03-03 18:52:40: Listener for "***********": 03/03/2013 18:52:40, need more than 1 value to unpack
2013-03-03 18:52:40: Listener for "***********": 03/03/2013 18:52:40, need more than 1 value to unpack
2013-03-03 18:52:43: Listener for "***********": At least one server is required
2013-03-03 18:52:43: Listener for "***********": Traceback (most recent call last):
2013-03-03 18:52:43: Listener for "***********": File "Switch.pyo", line 45, in __init__
2013-03-03 18:52:43: Listener for "***********": File "Switch.pyo", line 60, in parse_server
2013-03-03 18:52:43: Listener for "***********": ValueError: need more than 1 value to unpack
2013-03-03 18:52:43: Listener for "***********": Traceback (most recent call last):
2013-03-03 18:52:43: Listener for "***********": File "Switch.pyo", line 45, in __init__
2013-03-03 18:52:43: Listener for "***********": File "Switch.pyo", line 60, in parse_server
2013-03-03 18:52:43: Listener for "***********": ValueError: need more than 1 value to unpack
2013-03-03 18:52:40: Listener for "***********": 03/03/2013 18:52:40, need more than 1 value to unpack
2013-03-03 18:52:40: Listener for "***********": 03/03/2013 18:52:40, need more than 1 value to unpack
2013-03-03 18:52:43: Listener for "***********": At least one server is required
2013-03-03 18:52:43: Listener for "***********": Traceback (most recent call last):
2013-03-03 18:52:43: Listener for "***********": File "Switch.pyo", line 45, in __init__
2013-03-03 18:52:43: Listener for "***********": File "Switch.pyo", line 60, in parse_server
2013-03-03 18:52:43: Listener for "***********": ValueError: need more than 1 value to unpack
2013-03-03 18:52:43: Listener for "***********": Traceback (most recent call last):
2013-03-03 18:52:43: Listener for "***********": File "Switch.pyo", line 45, in __init__
2013-03-03 18:52:43: Listener for "***********": File "Switch.pyo", line 60, in parse_server
2013-03-03 18:52:43: Listener for "***********": ValueError: need more than 1 value to unpack
so this here is what im getting...I saw others with similar issues, but I havent read a solution.
What in the bajeebers did i do wrong? or is this just a case of wait for something to happen?
How did u fix it? I have the same problem
Alright I think I've got it.All I had to do was change the "I" value from 4 to 5 on the card that was low.Go figure.Been using guiminer since I started,over a year ago,and cgminer gets much better mh/s.My rig with 3 5830's went from 880 mh/s to 920 mh/s,no drop-outs like guiminer,cool.Oh yea,3 6770's from 610 to 655!
I still cant get guiminer stratum to work,but can get cgminer 2.9.3 works except 2 gpu's work at 99%,one runs at 63%.Tried restart,changing clocks,that just dropped all 3 gpu's.
This rig has 6750,5670,5830 in it and the one that runs slow is the 5830. I get 552 mh/s on the old guiminer 02-19-2012. I'm using guiminer 03-12-2012 to run stratum with proxy
1.2.0. Haven't tried this on my other mining rigs until I can get this one to work. I'm also running scriptminer on the cpu's for litecoin but thats insignificant.
What can I do to get all 3 gpu's to run 99% on cgminer?
This rig has 6750,5670,5830 in it and the one that runs slow is the 5830. I get 552 mh/s on the old guiminer 02-19-2012. I'm using guiminer 03-12-2012 to run stratum with proxy
1.2.0. Haven't tried this on my other mining rigs until I can get this one to work. I'm also running scriptminer on the cpu's for litecoin but thats insignificant.
What can I do to get all 3 gpu's to run 99% on cgminer?
CG miner I have 3 instances (also 2.9.6 is out).
And I also have the 11-18-2012 guiminer (i would upgrade if you can)
(I watch TV on -g 2, i am also writing this from work so someone help me if i wrote thing wrong)
I run:
-I 5 -g 2 --auto-fan --queue 1 --temp-target 70 --gpu-engine 890 --gpu-memclock 275 --temp-overheat 80 --gpu-fan 75-85 -v 2 -w 256
-I 10 -g 1 --auto-fan --queue 2 --temp-target 70 --gpu-engine 1350 --gpu-memclock 485 --temp-overheat 80 --gpu-fan 75-85 -v 2 -w 256
-I 10 -g 0 --auto-fan --queue 3 --temp-target 70 --gpu-engine 945 --gpu-memclock 275 --temp-overheat 80 --gpu-fan 75-85 -v 2 -w 256
I still cant get guiminer stratum to work,but can get cgminer 2.9.3 works except 2 gpu's work at 99%,one runs at 63%.Tried restart,changing clocks,that just dropped all 3 gpu's.
This rig has 6750,5670,5830 in it and the one that runs slow is the 5830. I get 552 mh/s on the old guiminer 02-19-2012. I'm using guiminer 03-12-2012 to run stratum with proxy
1.2.0. Haven't tried this on my other mining rigs until I can get this one to work. I'm also running scriptminer on the cpu's for litecoin but thats insignificant.
What can I do to get all 3 gpu's to run 99% on cgminer?
This rig has 6750,5670,5830 in it and the one that runs slow is the 5830. I get 552 mh/s on the old guiminer 02-19-2012. I'm using guiminer 03-12-2012 to run stratum with proxy
1.2.0. Haven't tried this on my other mining rigs until I can get this one to work. I'm also running scriptminer on the cpu's for litecoin but thats insignificant.
What can I do to get all 3 gpu's to run 99% on cgminer?
How to ignore this message:
ValueError: need more than 1 value to unpack
We have a firewall server on the perimeter network. MS TMG server.
ValueError: need more than 1 value to unpack
We have a firewall server on the perimeter network. MS TMG server.
Is it possible to use CPU only?
possible yes. the returns would be so low that it wouldn't be justifiable.
I am running more then a few laptops that i got for free as CPU only or using the on board intel Hd4000/2500/3000 to hash... not power efficient, but I don't pay for power here
____
So freaking Bit poor
1PtHcavXoakgNkQfEQdvnvEksEY2NvwaLM
If you have no other overhead than time, (I, myself tend to be a cheap all purpose whore. j/k ) then it may be worth it esp if the price per coin stays on a steady incline.. Good luck.
For me, I just put "localhost" not localhost:8332
It should depend on the pool though
It should depend on the pool though
Is it possible to use CPU only?
possible yes. the returns would be so low that it wouldn't be justifiable.
I am running more then a few laptops that i got for free as CPU only or using the on board intel Hd4000/2500/3000 to hash... not power efficient, but I don't pay for power here
____
So freaking Bit poor
1PtHcavXoakgNkQfEQdvnvEksEY2NvwaLM
Is it possible to use CPU only?
possible yes. the returns would be so low that it wouldn't be justifiable.
latest versions of maintained mining software do not require stratum proxy
eg: cgmnier guiminer
eg: cgmnier guiminer
Is it possible to use CPU only?
It looks like you don't have openCL installed for you GPUs. Which ones are you using?
Hello!
I received the same message on 2 workstations:
2012-12-04 16:45:44: Running command: poclbm.exe ******:*******@http://api.bitcoin.cz:8332 --device=0 --platform=0 --verbose -r1
2012-12-04 16:45:44: Listener for "Default" started
2012-12-04 16:45:44: Listener for "Default": 04/12/2012 16:45:44, need more than 1 value to unpack
2012-12-04 16:45:46: Listener for "Default": No PyOpenCL
2012-12-04 16:45:46: Listener for "Default": Not using OpenCL
2012-12-04 16:45:46: Listener for "Default": Nothing to mine on, exiting
2012-12-04 16:45:46: Listener for "Default": Traceback (most recent call last):
2012-12-04 16:45:46: Listener for "Default": File "Switch.pyo", line 45, in __init__
2012-12-04 16:45:46: Listener for "Default": File "Switch.pyo", line 60, in parse_server
2012-12-04 16:45:46: Listener for "Default": ValueError: need more than 1 value to unpack
Please help mee!!
I received the same message on 2 workstations:
2012-12-04 16:45:44: Running command: poclbm.exe ******:*******@http://api.bitcoin.cz:8332 --device=0 --platform=0 --verbose -r1
2012-12-04 16:45:44: Listener for "Default" started
2012-12-04 16:45:44: Listener for "Default": 04/12/2012 16:45:44, need more than 1 value to unpack
2012-12-04 16:45:46: Listener for "Default": No PyOpenCL
2012-12-04 16:45:46: Listener for "Default": Not using OpenCL
2012-12-04 16:45:46: Listener for "Default": Nothing to mine on, exiting
2012-12-04 16:45:46: Listener for "Default": Traceback (most recent call last):
2012-12-04 16:45:46: Listener for "Default": File "Switch.pyo", line 45, in __init__
2012-12-04 16:45:46: Listener for "Default": File "Switch.pyo", line 60, in parse_server
2012-12-04 16:45:46: Listener for "Default": ValueError: need more than 1 value to unpack
Please help mee!!
I downloaded mining_proxy_1.1.1exe and GUIMiner-v2012-11-18.
My GUIMiner is: Server: Other Website: n/a
Host: localhost:8332 Port: 8332
Username: myusername Password: .......
the bottom says: Value Error: need more than 1 value to unpack
Proxy black window keeps saying: 2012-12-01 19:02:04,259 INFO proxy client_service.handle_event # New job 7984 for prevhash 82946d6a, clean_jobs=False
I am working on 1 rig,I have 4 other rigs mining on GUIMiner v2012-02-19.Do i have to stop them?Do all the rigs have to run miner proxy?How does proxy know how to connect to bitcoin.cz?
I've tried to set this up several times with no luck,I could use a little help.Thanks
The other rings need to point to that "localhosts" IP in order for them them get the information they need, also make sure you have the other GUI miner updated to 2012-11-18 as that is when strantum was implemented on that thing.....
______
So freaking Bit poor
1PtHcavXoakgNkQfEQdvnvEksEY2NvwaLM
I downloaded mining_proxy_1.1.1exe and GUIMiner-v2012-11-18.
My GUIMiner is: Server: Other Website: n/a
Host: localhost:8332 Port: 8332
Username: myusername Password: .......
the bottom says: Value Error: need more than 1 value to unpack
Proxy black window keeps saying: 2012-12-01 19:02:04,259 INFO proxy client_service.handle_event # New job 7984 for prevhash 82946d6a, clean_jobs=False
I am working on 1 rig,I have 4 other rigs mining on GUIMiner v2012-02-19.Do i have to stop them?Do all the rigs have to run miner proxy?How does proxy know how to connect to bitcoin.cz?
I've tried to set this up several times with no luck,I could use a little help.Thanks
Jump to: