Maybe you can give a try too
(better just cut...)
It will hold a rig anyway.
Topic: I have a problem... (Read 414 times)
My friend always say that you can do everything with a box of matches.
Maybe you can give a try too
(better just cut...)
It will hold a rig anyway.
Maybe you can give a try too
(better just cut...)
It will hold a rig anyway.
You need 
As you see frame is too short for two same lenght connectors.
There is no other way.
Cut one more or both a bit.
What else you can do? You can make longer frame
I'll see As you see frame is too short for two same lenght connectors.
There is no other way.
Cut one more or both a bit.
What else you can do? You can make longer frame
You need
As you see frame is too short for two same lenght connectors.
There is no other way.
Cut one more or both a bit.
What else you can do? You can make longer frame
As you see frame is too short for two same lenght connectors.
There is no other way.
Cut one more or both a bit.
What else you can do? You can make longer frame
so maybe just trim/cut the connector?
Hmm, I might 
Use the force, brother... and the hammer.
so maybe just trim/cut the connector?
Why just dont use a hammer? ;-)
( I would )
( I would )
I have. In the picture can't you see that the connector only partially fits because there is already another connector in the tube.
Why just dont use a hammer? ;-)
( I would )
( I would )
Hi, I was making my detritus style open frame mining case and I encountered a problem. Two of the connectors don't fit because the metal tubing is too small. The connector will not go in the 2 1/2 inch metal piece. I am sure that I'm following the guide right. Here's the link to it: https://bitcointalksearch.org/topic/guide-make-your-own-open-frame-rig-29729
Here's some pictures:
Here's some pictures:
Jump to: