Topic: Ideal temperature for BitMain S7 (Read 994 times)
Grn, your ambient temps are pretty low. Is that ~5c?
I push all my s7s to about or just under 60C and they mostly run at 5Th/s, any faster than that and they either get too hot or fail and I need to do the sd card reset.
Elapsed GH/S(5s) GH/S(avg) FoundBlocks LocalWork Utility WU BestShare
1d1h41m29s 4,875.17 4,833.54 0 174,013,853 5.53 67,523.72
HW
7403
0.0071%
0.0070%
AntMiner
Chain# ASIC# Frequency Temp ASIC status
1 54 600 40 oooooooo oooooooo oooooo oooooooo oooooooo oooooooo oooooooo
2 54 600 39 oooooooo oooooooo oooooo oooooooo oooooooo oooooooo oooooooo
3 54 600 43 oooooooo oooooooo oooooo oooooooo oooooooo oooooooo oooooooo
Fan# Fan1 Fan2 Fan3 Fan4 Fan5 Fan6
Speed (r/min) 3,480 0 3,360 0 0 0
1d1h41m29s 4,875.17 4,833.54 0 174,013,853 5.53 67,523.72
HW
7403
0.0071%
0.0070%
AntMiner
Chain# ASIC# Frequency Temp ASIC status
1 54 600 40 oooooooo oooooooo oooooo oooooooo oooooooo oooooooo oooooooo
2 54 600 39 oooooooo oooooooo oooooo oooooooo oooooooo oooooooo oooooooo
3 54 600 43 oooooooo oooooooo oooooo oooooooo oooooooo oooooooo oooooooo
Fan# Fan1 Fan2 Fan3 Fan4 Fan5 Fan6
Speed (r/min) 3,480 0 3,360 0 0 0
Which is the ideal temperature board for BitMain S7?
At 60C i get just about full TH/s, about 5-10GH/s "loss". At 45C i lose another 10GH/s. So i like to run mine anywhere between 45C and 60C. I would tolerate 60-65C on bad days, but i really do not want 70C+.
Some people run these at 80C fine, though.
At 80c?? For how long? It must run 24/7
So far I find around 60 is the best for low hw rate and full hashrate. i get 0.003% error rate at 60-63. But sometimes it "creeps" up to 0.01%, so I restart it and it goes back down.
Thank you very much, Virosa GITS.
Which is the ideal temperature board for BitMain S7?
At 60C i get just about full TH/s, about 5-10GH/s "loss". At 45C i lose another 10GH/s. So i like to run mine anywhere between 45C and 60C. I would tolerate 60-65C on bad days, but i really do not want 70C+.
Some people run these at 80C fine, though.
Which is the ideal temperature board for BitMain S7?
Jump to: