Author

Topic: im need help about Pci-ex 1x to 16x riser cables. IDE o USB ? (Read 293 times)

legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
Stick with powered risers. The unpowered flat ribbon cable style wires are too thin for using under constant load. The best kind have a voltage regulator to make sure the card isn't pulling too much power from the slot. Performance wise for mining they are about the same. I prefer the six pin PCI-E  power connector risers as it distributes the load over more and thicker wires.

you can send me the picture of this model?

have link on amazon ?

Thanks
Almir

here is a good riser on amazon


https://www.amazon.com/gp/product/B06XDZ5H14/ref=oh_aui_detailpage_o00_s00?
sr. member
Activity: 312
Merit: 250
Stick with powered risers. The unpowered flat ribbon cable style wires are too thin for using under constant load. The best kind have a voltage regulator to make sure the card isn't pulling too much power from the slot. Performance wise for mining they are about the same. I prefer the six pin PCI-E  power connector risers as it distributes the load over more and thicker wires.

you can send me the picture of this model?

have link on amazon ?

Thanks
Almir
hero member
Activity: 1036
Merit: 606
Stick with powered risers. The unpowered flat ribbon cable style wires are too thin for using under constant load. The best kind have a voltage regulator to make sure the card isn't pulling too much power from the slot. Performance wise for mining they are about the same. I prefer the six pin PCI-E  power connector risers as it distributes the load over more and thicker wires.
sr. member
Activity: 312
Merit: 250
Dear Friends

im need help about Pci-ex 1x to 16x riser cables

Which cable to use? Usb or IDE? what's the difference ?

I'm thinking of using the flat for not spending energy

I have saphire rx 480 vga card

Thanks
Almir
Jump to: