Topic: Im realy frustrated and i need your help (Read 426 times)
Hello, probably you have to buy a new one graphics cards.
check your pci risers, dont connect them with sata, only 4pin or 6pin
First of all, confirm the input voltage into the assembly, is it in line with the specification?
Study manuals if available to ensure you assemble correctly.Test and check each device
at a time to by elimination to confirm its functionality.This way you should detect where
the fault is coming from.
Study manuals if available to ensure you assemble correctly.Test and check each device
at a time to by elimination to confirm its functionality.This way you should detect where
the fault is coming from.
by testing one card at a time you can confirm or deny that the problem is not your GPU's . if both cards don't crash testing one at a time on stock clocks then you can try running both cards at stock clocks as the next test.
so after few hours maybe around 12 hours my second card is working normal and hashing21.800 stable no crashing
does that mean i had bad riser ??
im gonna try and connect my gpu to a new riser and see or should i keep one directly to the motherboard and the other one to a riser... ?
Yea sounds like you have bad risers. Because you only have 2 gpus you could do it that way with one on the motherboard if u want to, should work. But yea get some new risers and see what happends.
by testing one card at a time you can confirm or deny that the problem is not your GPU's . if both cards don't crash testing one at a time on stock clocks then you can try running both cards at stock clocks as the next test.
so after few hours maybe around 12 hours my second card is working normal and hashing21.800 stable no crashing
does that mean i had bad riser ??
im gonna try and connect my gpu to a new riser and see or should i keep one directly to the motherboard and the other one to a riser... ?
So after 24 hours the first give me 0 crashes in stock setting now im trying the second card incase there'ssomething wrong with card i hope not
and its hashing 21.800 mh\s
and its hashing 21.800 mh\s
Maybe you got faulty GPU. I got 2 gpus which were not able to be flashed or overclocked... And the 3rd one came without BIOS (Sapphire nitro+). So I sent it back to the RMA and i am waiting for the results now .. 
Hashrate on the pool will always fluctuate but look for the average 6/12/24 hours.
so its been around 12hours with no crashes
but on the mining pool it shows unstable hashrate
i guess im gonna wait till 24 hours then im gonna put the other card just to make sure everything is working fine
https://ibb.co/kARnTb
im not sure if that means unstable or nothing to worry about coz i wasnt at home and im just checking through the pool
but right now its doing 21.800 stock setting
but on the mining pool it shows unstable hashrate
i guess im gonna wait till 24 hours then im gonna put the other card just to make sure everything is working fine
https://ibb.co/kARnTb
im not sure if that means unstable or nothing to worry about coz i wasnt at home and im just checking through the pool
but right now its doing 21.800 stock setting
by testing one card at a time you can confirm or deny that the problem is not your GPU's . if both cards don't crash testing one at a time on stock clocks then you can try running both cards at stock clocks as the next test.
I'm assuming that the "-50" that you put in settings is -50mv voltage to the core? Try getting rid of that. Most cards can handle that but occasionally one card can't and it will cause the whole rig to go down.
Also, you can leave Hardwareinfo64 running and look to see if you're getting memory errors - if you are back off on the memory overclocks.
Also, you can leave Hardwareinfo64 running and look to see if you're getting memory errors - if you are back off on the memory overclocks.
Now im running 1 card directly to the motherboard stock setting lets see if its gonna crash...
Question will that happen if i was running 2 gpu??
Have you checked what memory the cards have (samsung, hynix?), and have the correct bios flash?
Yeah i checked and did bios flash and i reflashed it bk to original now the rig mining on stock setting getting 21 3 hours runing no crashes untill now ill wait untill im bk from work and keep you guys updated If I had to guess, your issue was probably aggressive overclocking. Do you remember what your settings were?
1200, 1950 -50 mv 60% fan
Hynix memory
I'm assuming that the "-50" that you put in settings is -50mv voltage to the core? Try getting rid of that. Most cards can handle that but occasionally one card can't and it will cause the whole rig to go down.
Also, you can leave Hardwareinfo64 running and look to see if you're getting memory errors - if you are back off on the memory overclocks.
Also, you can leave Hardwareinfo64 running and look to see if you're getting memory errors - if you are back off on the memory overclocks.
Have you checked what memory the cards have (samsung, hynix?), and have the correct bios flash?
If I had to guess, your issue was probably aggressive overclocking. Do you remember what your settings were?
what is the model of PSU that you have ?
no crashes untill now but im gonna keep it for few hours, yesterday it stayed stable for 3 hours then it crashed i have corsair cx750 W
what is the model of PSU that you have ?
if it crashes, change the GPU with your other card and retest under the same conditions, stock settings use the same pcie connector(s) from your PSU, you want nothing else to change other than changing the GPU.
yes only one GPU at a time and test it on stock clocks, connected directly to the x16 slot in your mobo
plugged 1 card directly into the motherboard its doing 21.900 mh\s stock setting ill wait and see if its gonna crash
ill wait for a while and update you guys thx for the help
yes only one GPU at a time and test it on stock clocks, connected directly to the x16 slot in your mobo
Did you test both cards one at a time installed directly into the motherboard?
you want me to connect 1 of the cards directly into the motherboard and try it ??
im doing that now let see what will happend
Did you test both cards one at a time installed directly into the motherboard?
HELP me
anyone
anyone
Check the event log. What kind of errors do you have when the rig is crashing? What is your power draw? What is your swap file size? Upgrade to 8GB ram.
so i started 1 card and after few hours it freeze again and i got this error from the event log
dwrninit : the desktop windos manager process has exited (process exit code blah blah )restart count 1 primary display device id radeon rx 570 series !!!!
and 1 more error ATIlerecord
help
sounds like its just OC to much hence the crashings but as you said you reflashed with original bios,
If you have any new risers at hand you could try switch the risers out.
Other then that you should disconnect one of the cards and just hook up one of the cards in the x16 slot, no risers.
run it and see if it will crash in 48 hours, if not shit down.
Rince repeat with second card.
If second card crashes well then you probably have to rma that card.
If you have any new risers at hand you could try switch the risers out.
Other then that you should disconnect one of the cards and just hook up one of the cards in the x16 slot, no risers.
run it and see if it will crash in 48 hours, if not shit down.
Rince repeat with second card.
If second card crashes well then you probably have to rma that card.
Thx for the advice ill try if nothing worked now its been an hour mining with 1 card no crashing no nothing 1200,1950 -50
Ill wait till tomorrow and see
Check the event log. What kind of errors do you have when the rig is crashing? What is your power draw? What is your swap file size? Upgrade to 8GB ram.
most of the errors im getting display driver amdkmdap stopped responding and has successfully recovered
sometimes im getting this the previous system shutdown at.... was unexpected and its around the time that the rig stopped kernel-boot when im forcing it to shutdown coz it freeze and i cant do anything
i got this error bugcheck : unable to produce minidump file from the ful dump file i dnt know what is this !!
and this one too distrbutedCOM the server(bla bla bla ) did not register with DCOM within the required timeout
and service control manager : the Dhcp service depends of the AFD service which failed to start because of the following error:
a device attached tothe system is not functioning.
DCOM got error "1084" attempting to start the service dps wit arguments "unavailable "in order to run the service ( blah blah blah)
im sorry its too long coz i couldnt figure out what kind of error i might need to know
my power draw is 110 gpuz card only and its not stable sometimes goes down and up
i couldnt find the swapfile but if oyu mean my virtual memory i set up it to 16gb
sounds like its just OC to much hence the crashings but as you said you reflashed with original bios,
If you have any new risers at hand you could try switch the risers out.
Other then that you should disconnect one of the cards and just hook up one of the cards in the x16 slot, no risers.
run it and see if it will crash in 48 hours, if not shit down.
Rince repeat with second card.
If second card crashes well then you probably have to rma that card.
If you have any new risers at hand you could try switch the risers out.
Other then that you should disconnect one of the cards and just hook up one of the cards in the x16 slot, no risers.
run it and see if it will crash in 48 hours, if not shit down.
Rince repeat with second card.
If second card crashes well then you probably have to rma that card.
Check the event log. What kind of errors do you have when the rig is crashing? What is your power draw? What is your swap file size? Upgrade to 8GB ram.
Hello i have assemble my first mining rig
Motherboard: gigabyte H110 D3a
ram :4gb ddr4
Hard disk: 120 ssd
Psu: corsair 750wat
2 rx570 red devils
Windows10
I flashed them and overclocked, they worked fine for a day and then they crashed i restarted the miner and it worked fine for 1more day then they start crashing
I reflashed to ORIGINAL bios,kept on crashing
Im realy frustrated and i dnt know what to do im scared its hardware
Then ill be fucked. And yeah my hdmi keeps on disconnecting...
HELP ME PLZZZZ
Motherboard: gigabyte H110 D3a
ram :4gb ddr4
Hard disk: 120 ssd
Psu: corsair 750wat
2 rx570 red devils
Windows10
I flashed them and overclocked, they worked fine for a day and then they crashed i restarted the miner and it worked fine for 1more day then they start crashing
I reflashed to ORIGINAL bios,kept on crashing
Im realy frustrated and i dnt know what to do im scared its hardware
Then ill be fucked. And yeah my hdmi keeps on disconnecting...
HELP ME PLZZZZ
Jump to: