2 left in stock!
Both are hashing at 450-460 gh/s!
Topic: [IN-STOCK] Rockminer "Rocket" RK-Box 440 - 480 GH/s ASIC Bitcoin Miner [$580] (Read 1712 times)
July 10, 2014, 07:08:29 AM
July 09, 2014, 08:08:57 PM
Thanks for the ultra quick shipment and fast responses to my questions. I never expected the miner to ship on a Saturday, but you made it happen. The FC chips must vary widely because I'm getting an average of 490 GH/s (without overclocking). I think the specs advertised were 460 GH/s, so it's performing better than expected. It was easier to set up than I thought as well. Thanks for the 4- port USB hub and RPi power adapter. It's nice to power the Pi directly from the psu rather than sacrificing a micro USB cable as the power cord.
Would additional cooling improve the performance? If so, do you have suggestions on fan placement?
Thanks again, I may be buying another soon!
Would additional cooling improve the performance? If so, do you have suggestions on fan placement?
Thanks again, I may be buying another soon!
No worries bro. I would suggest the R3 units next time. They are more stable and have better design overall. Although the advertised speed is 450 -500 gh/s. My batch just arrived so will be posting pictures soon.
Additional cooling helps a bit. Are in house units seem to perform 3-4% better with box fans blowing behind them. Also swapping the fan from pull > push might help as well.
That is a good suggestion. Also there is an issue with thermal paste. One board stopped working, after taking it apart I found loads of thermal paste was seeping into the circuit boards. Cleaned it up and it was ready to go again.
July 09, 2014, 03:38:09 PM
Thanks for the ultra quick shipment and fast responses to my questions. I never expected the miner to ship on a Saturday, but you made it happen. The FC chips must vary widely because I'm getting an average of 490 GH/s (without overclocking). I think the specs advertised were 460 GH/s, so it's performing better than expected. It was easier to set up than I thought as well. Thanks for the 4- port USB hub and RPi power adapter. It's nice to power the Pi directly from the psu rather than sacrificing a micro USB cable as the power cord.
Would additional cooling improve the performance? If so, do you have suggestions on fan placement?
Thanks again, I may be buying another soon!
Would additional cooling improve the performance? If so, do you have suggestions on fan placement?
Thanks again, I may be buying another soon!
Additional cooling helps a bit. Are in house units seem to perform 3-4% better with box fans blowing behind them. Also swapping the fan from pull > push might help as well.
July 09, 2014, 02:14:20 PM
Thanks for the ultra quick shipment and fast responses to my questions. I never expected the miner to ship on a Saturday, but you made it happen. The FC chips must vary widely because I'm getting an average of 490 GH/s (without overclocking). I think the specs advertised were 460 GH/s, so it's performing better than expected. It was easier to set up than I thought as well. Thanks for the 4- port USB hub and RPi power adapter. It's nice to power the Pi directly from the psu rather than sacrificing a micro USB cable as the power cord.
Would additional cooling improve the performance? If so, do you have suggestions on fan placement?
Thanks again, I may be buying another soon!
Would additional cooling improve the performance? If so, do you have suggestions on fan placement?
Thanks again, I may be buying another soon!
July 09, 2014, 12:15:19 PM
Here is a screenshot in cgminer:
July 04, 2014, 11:47:37 PM
4 left in stock
July 04, 2014, 05:33:15 AM
This needs to be like half what you are charging....
good luck finding that.
5 left now.
Good luck finding 480Gh/s for under $730? You're right that will be hard
*trips over 50 people trying to dump S1s*
July 04, 2014, 05:16:34 AM
This needs to be like half what you are charging....
good luck finding that.
5 left now.
July 04, 2014, 04:11:44 AM
This needs to be like half what you are charging....
July 04, 2014, 04:00:39 AM
July 04, 2014, 03:57:10 AM
Only 6 left! 
July 04, 2014, 03:13:55 AM
Rockminer "Rocket" RK-Box 440 - 480 GH/s ASIC Bitcoin Miner
Rockminer have done it again and delivered an outstanding product with superb performance. Based on the Gen3 ASICMINER chips. It has a hash speed of 440 – 480 GH/s! Uses ATX Powersupply (500 watts is suitable). In-stock with immediate shipping! Can be connect directly to computer or controlled by raspberry pi.
Specifications
HashRate: 440 – 480 GH/S
Power Consumption: 480-500W
Cooling: Air Cooled Heatsinks
Size: 210*230*230mm
Each Blade: 160mm*170mm
Weight: 7 kg
PSU: 4*6PIN PCI-E Power Required
Noise: 65DB
Supported Operating systems
- Windows, Mac, Raspberry Pi, Linux
Shipping
DHL (2-3 day delivery): $150 usd
Bitcoin Payment
Price: $580 usd
Bitcoin Payment address: 1Hbe66B2EhdRg6nWNXeX17x4sm1F2gE4be
Please use coinbase btc/usd exchange rate at time of payment.
Paypal Payment
PM me for details
Buyer must pay paypal fees
Orders
Name Quantity Payment Method Status
ZBC3 1 Paypal Sent (tracking info updated)
Jump to: