Topic: Inno Monitor - detection of faulty hashboards (Read 135 times)
I sent the hashboards to a professional repair shop in China.
The A6 logs are hidden even if logged or or on ip/logs or /mlogs. I was never able to get them to successfully display on any of my units.
As for innomonitor, it will always show whatever the first error that is thrown. If its on a particular board, remove it and then restart the unit and monitor for the next error.
It sucks but its an old device not much else you can do.
As for innomonitor, it will always show whatever the first error that is thrown. If its on a particular board, remove it and then restart the unit and monitor for the next error.
It sucks but its an old device not much else you can do.
I did this and the innomonitor reported to me that the hashboard I had removed was not involved.
It did not evaluate me for any error.
If there weren't more errors then it seems you resolved the errors?
Screenshots would be more helpful here.
The A6 logs are hidden even if logged or or on ip/logs or /mlogs. I was never able to get them to successfully display on any of my units.
As for innomonitor, it will always show whatever the first error that is thrown. If its on a particular board, remove it and then restart the unit and monitor for the next error.
It sucks but its an old device not much else you can do.
As for innomonitor, it will always show whatever the first error that is thrown. If its on a particular board, remove it and then restart the unit and monitor for the next error.
It sucks but its an old device not much else you can do.
I did this and the innomonitor reported to me that the hashboard I had removed was not involved.
It did not evaluate me for any error.
The A6 logs are hidden even if logged or or on ip/logs or /mlogs. I was never able to get them to successfully display on any of my units.
As for innomonitor, it will always show whatever the first error that is thrown. If its on a particular board, remove it and then restart the unit and monitor for the next error.
It sucks but its an old device not much else you can do.
As for innomonitor, it will always show whatever the first error that is thrown. If its on a particular board, remove it and then restart the unit and monitor for the next error.
It sucks but its an old device not much else you can do.
Try to clear your browser cache or use incognito mode. If it doesn't work then try other browsers like firefox or Brave.
If it still doesn't show try to access it with other devices like a mobile phone or laptop.
If all suggestion above doesn't work flash your miner with the latest version from https://www.innosilicon.com/html/support_en/download.html
Then try to access it again let see if it still doesn't work.
I tried all the best practices and contacted Innosilicon support. Unsuccessfully.
I do not know what to do. This way I can't find errors on my hashboards.
Try to clear your browser cache or use incognito mode. If it doesn't work then try other browsers like firefox or Brave.
If it still doesn't show try to access it with other devices like a mobile phone or laptop.
If all suggestion above doesn't work flash your miner with the latest version from https://www.innosilicon.com/html/support_en/download.html
Then try to access it again let see if it still doesn't work.
the problem is that my logs can't be displayed.
I wrote it as your example, I just changed the IP and I won't see anything.
Don't know why?
I wrote it as your example, I just changed the IP and I won't see anything.
Don't know why?
Have you login first?
It won't show anything if you didn't log in first you need to type the IP first on the web browser then enter.
After you log in add the /logs at the end of the IP then enter.
It would be better if you could read the support "problem and solutions"
this is what my blank diary looks like:
https://imgur.com/LjlCs99
the problem is that my logs can't be displayed.
I wrote it as your example, I just changed the IP and I won't see anything.
Don't know why?
I wrote it as your example, I just changed the IP and I won't see anything.
Don't know why?
Have you login first?
It won't show anything if you didn't log in first you need to type the IP first on the web browser then enter.
After you log in add the /logs at the end of the IP then enter.
It would be better if you could read the support "problem and solutions"
the problem is that my logs can't be displayed.
I wrote it as your example, I just changed the IP and I won't see anything.
Don't know why?
I wrote it as your example, I just changed the IP and I won't see anything.
Don't know why?
Copy the logs from your miner and post them here if you don't know how to find the logs type this "theminersip/logs" in your browser without quotes.
Sample 192.168.1.101/logs
Let's see if we can find more information on the logs about your other hashboards.
Sample 192.168.1.101/logs
Let's see if we can find more information on the logs about your other hashboards.
I have some faulty hashboards in the Innosilicon A6.
When I release InnoMonitor, it only prints one faulty card. But the others will not list. Can anyone advise me how to find out where other bugs are on other hashboards?
Thanks for help.
When I release InnoMonitor, it only prints one faulty card. But the others will not list. Can anyone advise me how to find out where other bugs are on other hashboards?
Thanks for help.
Jump to: