Topic: Innosilicon T2T32 daily crashing (Read 278 times)
I run all my Inno gear at factory with no issues, but that's in a climate controlled datacenter. Heat does affect them.
I have done some improvements:
1) Made extended power connector with 3x2.5mm cable.
2) Switched it to stabilized supply
3) Connected it with direct internet line from main router
So, I don't know, what was cured, but now asic works great.
Additionally, I can see power consumption now.
Performance mode:
Miner consumption: 2 389.6 W
Sorry guys, it was router
:
that is a good plan you may get balanced +++
I think my t3t39 is on balanced+
innot39..31.431T..31.470T..31.350T..0%...2019-07-31 12:35...Active...Check
gets about 31th zero issues
I think my t3t39 is on balanced+
innot39..31.431T..31.470T..31.350T..0%...2019-07-31 12:35...Active...Check
gets about 31th zero issues
...
I'm planning to increase speed step-by-step until next crash (luckily, there is a lot of steps
). If you want, i'll post my maximum stable speed here.
Yeah with 8c air intake it could be fans were at 50% and temps were at 63c
but I have found with
the t1
the t2t24
the t3t39
all run very good at balanced
all suck at factory and or full speed.
even when it was winter and -5c up to +10c they all crash a lot when running full speed or close to full speed.
but I have found with
the t1
the t2t24
the t3t39
all run very good at balanced
all suck at factory and or full speed.
even when it was winter and -5c up to +10c they all crash a lot when running full speed or close to full speed.
the 50% fan and 63c temp is too good for factory mode.
You know, I've seen only +8C this morning outside, so I have opportunities to use cold air for cooling.
So some kind of false info was happening you were most likely much hotter and it powered off to protect from heat.
Please let us know if balanced works better with more up time.
Please let us know if balanced works better with more up time.
Now asic works more then 30 hours without problem. Average hashrate is 28.81Th/s on the pool and temperature is 55/58/59. I dont have opportunyties to measure consumption now, my additional smart plug still on the way.
Thanks a lot!
I did it today. I had "factory" mode until it.
It would be very sad, if cause was in "factory" mode - fan was 50% and temperature was ~63C only.
I did it today. I had "factory" mode until it.
It would be very sad, if cause was in "factory" mode - fan was 50% and temperature was ~63C only.
the 50% fan and 63c temp is too good for factory mode.
So some kind of false info was happening you were most likely much hotter and it powered off to protect from heat.
Please let us know if balanced works better with more up time.
Are you on the latest firmware from Innosilicon?
Of course! First thing!
Are you on the latest firmware from Innosilicon?
Thanks a lot!
I did it today. I had "factory" mode until it.
It would be very sad, if cause was in "factory" mode - fan was 50% and temperature was ~63C only.
I did it today. I had "factory" mode until it.
It would be very sad, if cause was in "factory" mode - fan was 50% and temperature was ~63C only.
set it to balanced speed it will run at 28 or 27 th and not crash. you have it set to factory or turbo
all my inno gear works well set to balance and sucks at factory to turbo ie faster speed.
I have a t2t24 set to balanced runnign since last august does 19 th va 24th but it just works. Zero issues for 11 months.
all my inno gear works well set to balance and sucks at factory to turbo ie faster speed.
I have a t2t24 set to balanced runnign since last august does 19 th va 24th but it just works. Zero issues for 11 months.
I took one Innosilicon T2T 32tH for testing.
But it doesn't want to work longer then day. While bitminers works great (same router, same power source).
It looks like this:
Does it have any logs to see what happening?
P.S. Works bad, but always predict new Slushpool's blocks!
But it doesn't want to work longer then day. While bitminers works great (same router, same power source).
It looks like this:
Does it have any logs to see what happening?
P.S. Works bad, but always predict new Slushpool's blocks!
Jump to: