Topic: Installing myNode on Mini PC (HP) (Read 85 times)
Installing myNode on a Mini PC, like an HP model, involves downloading the myNode software, flashing it onto a storage device (such as an SSD or USB), and connecting it to the Mini PC. After setting up the network connection, boot the Mini Comcast Support phone number PC, access the myNode dashboard through a web browser, and follow the setup instructions to complete the installation.
OK that did it!
This is what I had to do on the HP for anyone who finds this in the future:
1.) Hold the ESC button to enter bios
2.) Press F10 for settings
3.) Go to advanced tab and select Secure Boot Settings
4.) Select "Legacy Enable and Secure Boot Disable"
5.) F10 to save changes
6.) HP will then prompt you to type 4 numbers and confirm.... note you need to use the numbers above the letters on your keyboard not the pad.
7.) while it reboots hold ESC to get back into BIOS
8.) Select USB to boot from
This is what I had to do on the HP for anyone who finds this in the future:
1.) Hold the ESC button to enter bios
2.) Press F10 for settings
3.) Go to advanced tab and select Secure Boot Settings
4.) Select "Legacy Enable and Secure Boot Disable"
5.) F10 to save changes
6.) HP will then prompt you to type 4 numbers and confirm.... note you need to use the numbers above the letters on your keyboard not the pad.
7.) while it reboots hold ESC to get back into BIOS
8.) Select USB to boot from
Get into the BIOS of the machine and turn off secure boot.
https://support.hpe.com/hpesc/public/docDisplay?docId=c04398276&page=s_enable_secure_boot_enforcement.html&docLocale=en_US
The above HP link may or may not be exactly for your PC but it's somewhere in there.
-Dave
https://support.hpe.com/hpesc/public/docDisplay?docId=c04398276&page=s_enable_secure_boot_enforcement.html&docLocale=en_US
The above HP link may or may not be exactly for your PC but it's somewhere in there.
-Dave
I'm trying to run myNode on a HP Elite Desk 705 mini PC. When booting from the USB I'm getting the error "Selected boot image did not authenticate":
https://image.nostr.build/af6580a98250750fd6624fb7e09a4278a8dc38c22e66fe491510be3bbcb706e2.png
ANyone have any ideas? I've tried two different USBs so far etched with Balena and the extracted image file from myNode's site (PC Image / Model Two | Download v0.3.24 (amd64))
Thanks hommies
https://image.nostr.build/af6580a98250750fd6624fb7e09a4278a8dc38c22e66fe491510be3bbcb706e2.png
ANyone have any ideas? I've tried two different USBs so far etched with Balena and the extracted image file from myNode's site (PC Image / Model Two | Download v0.3.24 (amd64))
Thanks hommies
Jump to: