Topic: [INTEREST CHECK] 1HoDLCLUB customizable ingots (Read 341 times)
Do these come with Halos?
I’m in for 1
Good morning everyone !
Thanks for you all interest !
THat's what gonna happen, there is just a minium amount to reach the production cost etc !
Thanks for you all interest !
Instead of making 210, why don't you leave this open for a few months, then close it forever? Making it a TRUELY limited Edition?
THat's what gonna happen, there is just a minium amount to reach the production cost etc !
depending on price and if they are DIY I would like # 76 
I would definitely be interested in one or two of them!!
Instead of making 210, why don't you leave this open for a few months, then close it forever? Making it a TRUELY limited Edition?
Good Morning everyone ! i hope you all are fine in this sunny week end ! 
Thank you all for your interest!
So yes indeed this is more of a personal collectible! despite this they will all be numbered if the project is done and you will also have the possibility of not engraving anything on the face for those who would like to resell it later! everything is possible !
Thank you all for your interest!
So yes indeed this is more of a personal collectible! despite this they will all be numbered if the project is done and you will also have the possibility of not engraving anything on the face for those who would like to resell it later! everything is possible !
I’ll take one my friend. Number 23 if possible if not lowest available number.
Whoops I meant to post this on the diy post.
Whoops I meant to post this on the diy post.
I own and love the first ingot you made! I think it is a really cool idea I would want one.
I'm in!
Although for the custom engraving, it would mean all resale is gone...
This seems more like a personal vanity item than a collector item, and at the price point you're asking, that's completely okay!
But I certainly like this idea as something you'd hold near and dear.
Having our handles engraved on it means they are all one of a kind.
xSlyy
Although for the custom engraving, it would mean all resale is gone...
This seems more like a personal vanity item than a collector item, and at the price point you're asking, that's completely okay!
But I certainly like this idea as something you'd hold near and dear.
Having our handles engraved on it means they are all one of a kind.
xSlyy
I would probably be in for a few. Customizable could make nice gifts
Want one. Not sure I like the idea with customizable text. Nobody want one with Jan Emil on when I am broke one day and need to sell.
Definitely in for at least 2!
I’d be in for a few. Really like the orange enamel idea, and the projected size of the bar.
Thank you ! happy that the idea is loved ! I love orange enamel too ! and yes bigger pieces !
price it reasonable $100+ loading . Ingot must be 4x 5x bigger than the previous one . 
.
. Thanks ! yes 4x 5x bigger but not silver like the 1oz Bitcoin ingots !
price it reasonable $100+ loading . Ingot must be 4x 5x bigger than the previous one . .
.
I’d be in for a few. Really like the orange enamel idea, and the projected size of the bar.
1HoDLCLUB customizable ingots
Hello everyone ! i hope you all are fine !!
Today I open this post to measure the interest on a project that I had in mind for a while, it is a project that will give everyone the possibility of having a customizable BTC 1HoDLCLUB collectible !
I think you all remember the 1oz Bitcoin ingots project! this piece had been much appreciated by the community.
I would like to redo an ingot but this time a little different, it would be to make an ingot that would be in brass or copper plated in 2 tone gold and silver with the "B" of Bitcoin in Orange enamel. It would be bigger than the 1oz Bitcoin ingots, the size is not yet defined but we are talking about 4-5 times the size of the original.
unlike the 1oz Bitcoin ingots you could choose which will be laser engraved on the front of the ingots, example bellow
The front customisable laser graving gonna be maximum of 14 caracters !
for the back part as on the 1oz Bitcoin ingots there was the laser engraved BTC address, for this version you will have the choice of the first Bit of the Vanity address! example below
the number of customizable characters is not yet defined, in any case 5 characters after the "1"! confirmation to come
the expected denomination is 0.005 BTC! I was also thinking of numbering each ingot from 1 to 210! but that is yet to be confirmed!
it would be a pre-sale, the production time should not exceed 1 month! This will of course depend on the fundraising time!
Actually it is a question of measuring the interest! the start of the project will be if 100 ingots are pre-ordered! the mint will be limited to 210! if the 100 ingots are reached the pre-sale will be closed 7 days later!
I chose brass or copper as the material because it will be more accessible to large numbers, it will take $100 per ingot + the loading of 0.005 BTC! [this will be confirmed according to interest once I have requested a quote!]
the design presented is not final! there could be modifications which will of course be presented before the opening of the pre sale thread!
this is about offering a unique piece to each of you! whether for you or to offer it to a loved one or friend!
I am of course open to your suggestions! if you have any, do not hesitate to say it here!
while waiting for your messages, I wish you all a good day / night and thank you all for your support and trust for more than 1 year now!
Today I open this post to measure the interest on a project that I had in mind for a while, it is a project that will give everyone the possibility of having a customizable BTC 1HoDLCLUB collectible !
I think you all remember the 1oz Bitcoin ingots project! this piece had been much appreciated by the community.
I would like to redo an ingot but this time a little different, it would be to make an ingot that would be in brass or copper plated in 2 tone gold and silver with the "B" of Bitcoin in Orange enamel. It would be bigger than the 1oz Bitcoin ingots, the size is not yet defined but we are talking about 4-5 times the size of the original.
unlike the 1oz Bitcoin ingots you could choose which will be laser engraved on the front of the ingots, example bellow
The front customisable laser graving gonna be maximum of 14 caracters !
for the back part as on the 1oz Bitcoin ingots there was the laser engraved BTC address, for this version you will have the choice of the first Bit of the Vanity address! example below
the number of customizable characters is not yet defined, in any case 5 characters after the "1"! confirmation to come
the expected denomination is 0.005 BTC! I was also thinking of numbering each ingot from 1 to 210! but that is yet to be confirmed!
it would be a pre-sale, the production time should not exceed 1 month! This will of course depend on the fundraising time!
Actually it is a question of measuring the interest! the start of the project will be if 100 ingots are pre-ordered! the mint will be limited to 210! if the 100 ingots are reached the pre-sale will be closed 7 days later!
I chose brass or copper as the material because it will be more accessible to large numbers, it will take $100 per ingot + the loading of 0.005 BTC! [this will be confirmed according to interest once I have requested a quote!]
the design presented is not final! there could be modifications which will of course be presented before the opening of the pre sale thread!
this is about offering a unique piece to each of you! whether for you or to offer it to a loved one or friend!
I am of course open to your suggestions! if you have any, do not hesitate to say it here!
while waiting for your messages, I wish you all a good day / night and thank you all for your support and trust for more than 1 year now!
Jump to: