I have a 290GH module working just fine. I installed most recent firmware onto an SD card for the pi, plugged it all in. Have it OC'd to 305-315GH depending on heat, runs like a champ.
ehash.com is their official site now
the email works fine, when I had some initial learning curve problems, I had a full email conversation going on w/ like 3-4 emails a day, back and forth. All questions answered.
When the price was lower on these modules, they were a great buy!
perhaps they just avoided my conversation because it said the modules were borked.ehash.com is their official site now
the email works fine, when I had some initial learning curve problems, I had a full email conversation going on w/ like 3-4 emails a day, back and forth. All questions answered.
When the price was lower on these modules, they were a great buy!
wanna share some of that knowledge? had mine running for 8 hours now but the longest "elapsed time" in the status tab is no longer than a few minutes (that I've noticed).
I can hear them restarting every few minutes.
My pool says I'm generating +35% invalid shares (and rising) (was 15% when I left alone last night).
I have a DH% of 4.7, 8.9, and 11.8 and the literature suggests not going beyond 2%
So any tips would be awesome, thank you
Posted from Bitcointa.lk - #lOEiS37YmMJ0CLac
Well, what controller are u using? .. if its a rpi , make sure to use a powered hub and not plug avy into rpi directly.
Second, use the 5.26 firmware and put it on SD card for rpi
3rd, what pool u using? these things dont work w/ p2pool at all
4th, make sure there arent 2 instances of miners listed under the status page, if there are that causes cgminer restarts ever 10minutes.
5th, max temp on these is around 60C ... so make sure to have the fan really fucking high
6th, these require at least 425w @ 310GH
