Your temps are just fine. Chip temps >80°C are when you should start worrying.
I have several D3s and it seems that chain 3 runs hottest on 90+% of them.
Topic: Is my D3 Running too hot? (Read 185 times)
Chain# ASIC# Frequency MH/S(RT) HW Temp(PCB) Temp(Chip)
1 60 537 6270.29 0 52 35
2 60 537 6592.40 0 50 67
3 60 537 6281.03 0 54 76
Fan# Fan1 Fan2
Speed (r/min) 4,170 5,340
Turned on my Antminer D3, im worried about 1 and 3
Especially chain 3 fluctuates (around 75-77 degrees) (Hashrate can be 5900 until 7300)
The left and middle one also were a bit loose when opening, when putting in the PSU this problem is resolved
I have another Antminer and i am afraid.
These readings were after 10 minutes
1 60 537 6270.29 0 52 35
2 60 537 6592.40 0 50 67
3 60 537 6281.03 0 54 76
Fan# Fan1 Fan2
Speed (r/min) 4,170 5,340
Turned on my Antminer D3, im worried about 1 and 3
Especially chain 3 fluctuates (around 75-77 degrees) (Hashrate can be 5900 until 7300)
The left and middle one also were a bit loose when opening, when putting in the PSU this problem is resolved
I have another Antminer and i am afraid.
These readings were after 10 minutes
Jump to: