Topic: Is that permissible temp.? (Read 209 times)
Think this is normal temp. when you playing.
For me the good temperature limit should be 70C. By the way, your GPU temp is that high may due to fan speed is too low.
In MSI afterburner, you could adjust the fan speed auto calibrate with temperature, most of my GPUs stay around 60C with fan speed of ~58-65%.
In MSI afterburner, you could adjust the fan speed auto calibrate with temperature, most of my GPUs stay around 60C with fan speed of ~58-65%.
Worry about adding more air circulation if you see over 84C. 74 is well within a safe threshold for a 580.
Circulation is there. There is 1 1/2 inch gap between GPUs. Overhead fan is running. Room is not fully closed.
At 74C I adjusted fans speed in Afterburner at 45% and right now temps are 58C/~1800 RPM and 52C/~1800 RPM for GPU1 and GPU2.
Do you suggest to revert to old setting when fans were at 25% and temps on 74C-75?
Worry about adding more air circulation if you see over 84C. 74 is well within a safe threshold for a 580.
74 is pretty good, don't let it go over that, put 75 as a green to yellow threshold, things can get messy above 75
Thanks.
Just to check I have set at fans at 47%. Its giving:
GPU1: 52C / 1870 RPM
GPU2: 58C / 1906 RPM
Can you please share some link on optimization correlation of speed vs. temp vs. RPM so that I wont be giving trouble to you guys
Regards,
Rizwan
Just to check I have set at fans at 47%. Its giving:
GPU1: 52C / 1870 RPM
GPU2: 58C / 1906 RPM
Can you please share some link on optimization correlation of speed vs. temp vs. RPM so that I wont be giving trouble to you guys
Regards,
Rizwan
@ Rizwan Your fans are spinning to low.
Use software like afterburner (70-80% or custom fan curve) or wattman (2500-3000rpm) to get some decent fan speed going.
Target around 65C for safe limits.
Good luck.
Use software like afterburner (70-80% or custom fan curve) or wattman (2500-3000rpm) to get some decent fan speed going.
Target around 65C for safe limits.
Good luck.
ya know if you looked at wattman or any other OC software you would have found out what the running temp is for rx 580 instead of coming on here like some danm noob asking stupid fucking questions that you could have answered yourself
fucking swear people are fucking lazy as shit
change that tampon. its beginning to stink.
Hi,
Setup: 2x RX 580 factory OC and not undervolted, AsRock H81 R2.0, Nanopool, Claymore miner
Rig has been running for few hour now. Have noticed:
a) Rig got hanged once and I had to physically reset the machine.
b) GPU fan speed is ~ 43 for GPU 1 and ~ 26 for GPU 2.
c) The constant temperature of each GPU is 74C. Sometimes it goes to 75C but never beyond that. Would be grateful if you let me know if that is a permissible temperature?
Thanks and regards,
Rizwan
What OS that you use and driver? If windows, better use 1709 and blockchain driver. Setup: 2x RX 580 factory OC and not undervolted, AsRock H81 R2.0, Nanopool, Claymore miner
Rig has been running for few hour now. Have noticed:
a) Rig got hanged once and I had to physically reset the machine.
b) GPU fan speed is ~ 43 for GPU 1 and ~ 26 for GPU 2.
c) The constant temperature of each GPU is 74C. Sometimes it goes to 75C but never beyond that. Would be grateful if you let me know if that is a permissible temperature?
Thanks and regards,
Rizwan
75 is tolerable in a hot room when mining, but if you're in a cool room you should be seeing lower.
IMO set your fan speeds a little higher - 60% looks like it would be enough for your setup.
IMO set your fan speeds a little higher - 60% looks like it would be enough for your setup.
Do not let it go over 75c. 75c or less is just fine.
Hi,
Setup: 2x RX 580 factory OC and not undervolted, AsRock H81 R2.0, Nanopool, Claymore miner
Rig has been running for few hour now. Have noticed:
a) Rig got hanged once and I had to physically reset the machine.
b) GPU fan speed is ~ 43 for GPU 1 and ~ 26 for GPU 2.
c) The constant temperature of each GPU is 74C. Sometimes it goes to 75C but never beyond that. Would be grateful if you let me know if that is a permissible temperature?
Thanks and regards,
Rizwan
Setup: 2x RX 580 factory OC and not undervolted, AsRock H81 R2.0, Nanopool, Claymore miner
Rig has been running for few hour now. Have noticed:
a) Rig got hanged once and I had to physically reset the machine.
b) GPU fan speed is ~ 43 for GPU 1 and ~ 26 for GPU 2.
c) The constant temperature of each GPU is 74C. Sometimes it goes to 75C but never beyond that. Would be grateful if you let me know if that is a permissible temperature?
Thanks and regards,
Rizwan
ya know if you looked at wattman or any other OC software you would have found out what the running temp is for rx 580 instead of coming on here like some danm noob asking stupid fucking questions that you could have answered yourself
fucking swear people are fucking lazy as shit
LOLZ..
Have a glass of cold water and sit down if you are standing or lie-down if you are sitting Hi,
Setup: 2x RX 580 factory OC and not undervolted, AsRock H81 R2.0, Nanopool, Claymore miner
Rig has been running for few hour now. Have noticed:
a) Rig got hanged once and I had to physically reset the machine.
b) GPU fan speed is ~ 43 for GPU 1 and ~ 26 for GPU 2.
c) The constant temperature of each GPU is 74C. Sometimes it goes to 75C but never beyond that. Would be grateful if you let me know if that is a permissible temperature?
Thanks and regards,
Rizwan
Setup: 2x RX 580 factory OC and not undervolted, AsRock H81 R2.0, Nanopool, Claymore miner
Rig has been running for few hour now. Have noticed:
a) Rig got hanged once and I had to physically reset the machine.
b) GPU fan speed is ~ 43 for GPU 1 and ~ 26 for GPU 2.
c) The constant temperature of each GPU is 74C. Sometimes it goes to 75C but never beyond that. Would be grateful if you let me know if that is a permissible temperature?
Thanks and regards,
Rizwan
ya know if you looked at wattman or any other OC software you would have found out what the running temp is for rx 580 instead of coming on here like some danm noob asking stupid fucking questions that you could have answered yourself
fucking swear people are fucking lazy as shit
yes
Hi,
Setup: 2x RX 580 factory OC and not undervolted, AsRock H81 R2.0, Nanopool, Claymore miner
Rig has been running for few hour now. Have noticed:
a) Rig got hanged once and I had to physically reset the machine.
b) GPU fan speed is ~ 43 for GPU 1 and ~ 26 for GPU 2.
c) The constant temperature of each GPU is 74C. Sometimes it goes to 75C but never beyond that. Would be grateful if you let me know if that is a permissible temperature?
Thanks and regards,
Rizwan
Setup: 2x RX 580 factory OC and not undervolted, AsRock H81 R2.0, Nanopool, Claymore miner
Rig has been running for few hour now. Have noticed:
a) Rig got hanged once and I had to physically reset the machine.
b) GPU fan speed is ~ 43 for GPU 1 and ~ 26 for GPU 2.
c) The constant temperature of each GPU is 74C. Sometimes it goes to 75C but never beyond that. Would be grateful if you let me know if that is a permissible temperature?
Thanks and regards,
Rizwan
Jump to: