Is the forums source code available somewhere?

Gleb Gamow

vip

Activity: 1428

Merit: 1145

Quote from: Vod on June 22, 2016, 06:05:58 PM

Quote from: jsmit332 on June 22, 2016, 06:03:34 PM

Thanks for the responses. But i need to show people the progress of the ANN threads and show them the completed thread before they pay. I sort of wanted to have an area where clients could leave comments and see the threads progress as it is made. etc. That's why i wanted to do this as well.

I doubt Theymos would release his custom code, as it would open possible holes in the security.

Also, not to be insulting, but you are aware the new forum is launching soon? It is open source.

Perhaps theymos would be kind enough to share what the OP needs after the changeover for say a thermos of coffee [with honey and goat milk]. Roll Eyes

Will the open source code for the new forum include ALL codes?

Aside: @Vod, do you miss my old profile avatar replaced with a prison?

Back on topic: I'm planning on using BCT's new forum design for YuTübopołis' forum since it was expressed at the onset that it'll be available to everyone (sans cost if I'm not mistaken).

ScottishSecurity

newbie

Activity: 56

Merit: 0

https://github.com/SimpleMachines/SMF2.1
http://www.simplemachines.org/about/opensource.php

Quickseller

copper member

Activity: 2870

Merit: 2298

As mentioned (more then) a couple times, the full source code including the custom (security) features are not public. I believe this is due to the SMF license due to theymos using the not-most-recent version of SMF.

Hopefully the full code (including the security countermeasures) will be public when the new forum goes officially public because if there is some security hole, then the chances are higher that someone will alert theymos/the public about it so the security hole can be fixed/patched. If security countermeasures are not public, then the chances are higher that someone will find a hole, exploit it quietly, and continue to do so for an extended period of time.

krunox123

hero member

Activity: 756

Merit: 500

I don't bite.

Quote from: jsmit332 on June 22, 2016, 06:03:34 PM

But i need to show people the progress of the ANN threads and show them the completed thread before they pay.

Well, did you know what consequences might occur if you show them the actual/completed thread? They will just copy your thread, and you will not be paid aka scam. (Unless the fund has been escrowed.)

Quote from: jsmit332 on June 22, 2016, 06:03:34 PM

I sort of wanted to have an area where clients could leave comments and see the threads progress as it is made. etc. That's why i wanted to do this as well.

Can't you just send a screenshot of the entire thread via PM or email or anything?
Or... I'm not entirely sure, but I think you can create the thread in the Archival board.

jsmit332

hero member

Activity: 792

Merit: 1001

Video editing • Animated GIFs • Graphic Design

Quote from: Vod on June 22, 2016, 06:05:58 PM

Quote from: jsmit332 on June 22, 2016, 06:03:34 PM

Thanks for the responses. But i need to show people the progress of the ANN threads and show them the completed thread before they pay. I sort of wanted to have an area where clients could leave comments and see the threads progress as it is made. etc. That's why i wanted to do this as well.

I doubt Theymos would release his custom code, as it would open possible holes in the security.

Also, not to be insulting, but you are aware the new forum is launching soon? It is open source.

I know there is a beta that is out now but have not been keeping up with when it is actually out.

Vod

legendary

Activity: 3668

Merit: 3010

Licking my boob since 1970

Quote from: jsmit332 on June 22, 2016, 06:03:34 PM

Thanks for the responses. But i need to show people the progress of the ANN threads and show them the completed thread before they pay. I sort of wanted to have an area where clients could leave comments and see the threads progress as it is made. etc. That's why i wanted to do this as well.

I doubt Theymos would release his custom code, as it would open possible holes in the security.

Also, not to be insulting, but you are aware the new forum is launching soon? It is open source.

jsmit332

hero member

Activity: 792

Merit: 1001

Video editing • Animated GIFs • Graphic Design

Thanks for the responses. But i need to show people the progress of the ANN threads and show them the completed thread before they pay. I sort of wanted to have an area where clients could leave comments and see the threads progress as it is made. etc. That's why i wanted to do this as well.

Decoded

legendary

Activity: 1232

Merit: 1030

give me your cryptos

Click "preview".

DarkStar_

legendary

Activity: 2772

Merit: 3282

Quote from: jsmit332 on June 22, 2016, 03:47:42 PM

Quote from: DarkStar_ on June 22, 2016, 03:33:09 PM

-snip-

Thanks for your reply. I have already posted on here in a post within one of my threads as a sand box for ANN threads however recently a few clients have not been very comfortable with it being on the public bitcointalk website as there is still a chance people could see WIP ANN threads despite my efforts.

You don't need to post the actual post. Click reply on a thread, work on the thread design while using preview to see your work. Once your done/tired, copy the code to a text document to come back to it. No one will see your work then, except for the admins since they have access to your drafts (I assume). Won't be there on the public bitcointalk.

gif in case you got confused: (ignore the new tab opening at the start)

jsmit332

hero member

Activity: 792

Merit: 1001

Video editing • Animated GIFs • Graphic Design

Quote from: Lauda on June 22, 2016, 03:49:28 PM

Quote from: jsmit332 on June 22, 2016, 03:43:27 PM

Thanks for the reply. Sometimes if i am making a thread where the image covers the whole width of the post sometimes on regular SMF it will introduce side scrolling within the post whereas this forum resizes the images and makes it so that there is never and side scrolling.

You can just use the 'Preview' function to verify whether the size is appropriate. Additionally, it is easy to adjust the width using this example (200px width):

Code:

[img width=200][/img]

Thanks again. The thing is though i dont have to do that on bitcointalk to prevent side scrolling and im not sure why but on SMF sometimes some wired side scrolling seems to happen

Lauda

legendary

Activity: 2674

Merit: 2965

Terminated.

Quote from: jsmit332 on June 22, 2016, 03:43:27 PM

Thanks for the reply. Sometimes if i am making a thread where the image covers the whole width of the post sometimes on regular SMF it will introduce side scrolling within the post whereas this forum resizes the images and makes it so that there is never and side scrolling.

You can just use the 'Preview' function to verify whether the size is appropriate. Additionally, it is easy to adjust the width using this example (200px width):

Code:

[img width=200][/img]

jsmit332

hero member

Activity: 792

Merit: 1001

Video editing • Animated GIFs • Graphic Design

Quote from: DarkStar_ on June 22, 2016, 03:33:09 PM

As far as I'm aware, theymos hasn't released the forums custom plugin code anywhere, yet. It might be released once the new version is out of beta and implemented. Others have asked this before, and no one found anything. I doubt it changed. For your thread designing, couldn't you just work on the design in a post here, and use the preview button to see what it would look like. Don't post it though, and copy the code to a .txt document so you can come back to it. Seems easier to me.

Thanks for your reply. I have already posted on here in a post within one of my threads as a sand box for ANN threads however recently a few clients have not been very comfortable with it being on the public bitcointalk website as there is still a chance people could see WIP ANN threads despite my efforts. Currently i run SMF on a web server where i as the admim make all the user accounts for clients and make it so they can only see their products.

After doing that i thought it would be good if i could get the software identical to bitcointalk for a perfect sandbox. I want to do this because i think an exclusive sandbox is better for clients as they can leave comments as the thread is being made in the sandbox and it is a little more professional than having a sandbox randomly in a post somewhere in his forum.

jsmit332

hero member

Activity: 792

Merit: 1001

Video editing • Animated GIFs • Graphic Design

Quote from: Lauda on June 22, 2016, 03:32:21 PM

As far as I'm aware of, the custom changes made by theymos are not open-source.

...

What are you exactly trying to do (i.e. what's the problem)?

Thanks for the reply. Sometimes if i am making a thread where the image covers the whole width of the post sometimes on regular SMF it will introduce side scrolling within the post whereas this forum resizes the images and makes it so that there is never and side scrolling.

I would also like something similar to the image size proxy which prevents certain images on this forum though i rarely go over the file size limit it would just be a nice feature to have.

DarkStar_

legendary

Activity: 2772

Merit: 3282

As far as I'm aware, theymos hasn't released the forums custom plugin code anywhere, yet. It might be released once the new version is out of beta and implemented. Others have asked this before, and no one found anything. I doubt it changed. For your thread designing, couldn't you just work on the design in a post here, and use the preview button to see what it would look like. Don't post it though, and copy the code to a .txt document so you can come back to it. Seems easier to me.

Lauda

legendary

Activity: 2674

Merit: 2965

Terminated.

As far as I'm aware of, the custom changes made by theymos are not open-source.

Quote from: jsmit332 on June 22, 2016, 01:38:52 PM

I need it so specific because i offer ANN thread design and need to set up a sand box for work in progress threads. With other versions of SMF sometimes the way images are handled in posts are different to how it is on this forum.

What are you exactly trying to do (i.e. what's the problem)?

jsmit332

hero member

Activity: 792

Merit: 1001

Video editing • Animated GIFs • Graphic Design

Quote from: Karolus on June 22, 2016, 02:30:37 PM

The forum software is provided by a nonprofit called Simple Machines. It's open source. Read this as your homework assignment:

http://www.simplemachines.org/about/opensource.php

http://www.simplemachines.org/about/sitemap.php

Thanks for your reply. As i said in my post earlier i know it is SMF but this version has a lot of custom features which sometimes change how posts appear.

Karolus

newbie

Activity: 42

Merit: 0

Well, this is awkward. I posted a response but then figured out it doesn't adequately answer your question about the specific version. So, anyway... Those bitcoins are interesting, huh?

jsmit332

hero member

Activity: 792

Merit: 1001

Video editing • Animated GIFs • Graphic Design

I was wondering if the source code of this forum was available to download somewhere so i can set up a forum like this on a web server. I know this forum is SMF but theymos has made a lot of custom changes and i wanted to know if i could get this specific version of SMF from somewhere.

I need it so specific because i offer ANN thread design and need to set up a sand box for work in progress threads. With other versions of SMF sometimes the way images are handled in posts are different to how it is on this forum.

Could anyone help?

Thanks.

Topic: Is the forums source code available somewhere? (Read 877 times)