is there a Converter for this sata input so i can get a 4-6 pin

deadsix

hero member

Activity: 751

Merit: 517

Fail to plan, and you plan to fail.

Quote from: Mahmoud70 on August 13, 2021, 01:42:12 PM

i want to use a risers with 6pin cable but with molex or sata it's less power than the pcie needs(75)w and i don't want to use the main pcie entrances on the power supply becuse i want tp use them for the cards so i was thinking is there a cable i can use to convert this output to 8pin ? even if i use 2 to get one 8pin ? can i use that?

No. And its not recommended - they arent meant to handle that kind of amps and will likely burn/melt. If using a low power GPU use a molex riser. Or if you still want to use a pcie powered riser, get a splitter cable and use that on your psu's pcie cable - use one end of the splitter to power the riser and the other to power the GPU.

batsonxl

member

Activity: 1208

Merit: 27

Yes you can use but dont overload these slots to much it melts easy. max 2 risers on 1 slot.

Philipma1957cellphone

full member

Activity: 416

Merit: 125

Quote from: Bitfort on August 13, 2021, 04:55:22 PM

or something like this: https://www.ebay.com/itm/140662092231
(2x molex to pci-express 8-pin)

I am not sure it is wired correctly but it can work with proper wiring.

At op have the riser handle 50-80 watts usually only happens on high watt gpus. A 1080ti a 3080 a 3090

JayDDee

full member

Activity: 1424

Merit: 225

I'm not aware of such a cable but it seems like a good idea. The thing is not all PSUs use the
same pinout so they would have to be custom made.

Bitfort

sr. member

Activity: 952

Merit: 339

invest trade and gamble wisely

or something like this: https://www.ebay.com/itm/140662092231
(2x molex to pci-express 8-pin)

Philipma1957cellphone

full member

Activity: 416

Merit: 125

Yes.

Also this is for gpu mining not btc mining.

Question should be in altcoins

I will ask mods to move it.

I will look for a link for what you want.

https://www.walmart.com/ip/Cable-Matters-2-Pack-8-Pin-to-SATA-Power-Cable-SATA-to-8-Pin-PCIe-5-Inches/965486107?

Now to feed sata into this use two Sata cables from separate jacks.

So you can safely do two risers with four sata jacks.

Mahmoud70

jr. member

Activity: 33

Merit: 1

i want to use a risers with 6pin cable but with molex or sata it's less power than the pcie needs(75)w and i don't want to use the main pcie entrances on the power supply becuse i want tp use them for the cards so i was thinking is there a cable i can use to convert this output to 8pin ? even if i use 2 to get one 8pin ? can i use that?

Topic: is there a Converter for this sata input so i can get a 4-6 pin (Read 95 times)