Is this a configuration (driver) good setup for running a (5) 5830 miner?

cmg5461

sr. member

Activity: 369

Merit: 250

Quote from: ajstar on June 16, 2012, 03:13:04 AM

Quote from: cmg5461 on June 13, 2012, 02:14:35 PM

32bit windows CANNOT run more than 4 cards. Install 64bit.

Where exactly is the restriction? In number of phycical cards or number of chips?
I understand that it's imposible to fit 5 5830s in W7 32 bit, but is it possible to fit there for example three 5970s?

4 GPU's. you can have 1 5970 and 2 5870's, but as long as the total GPU count is below 4, you're fine.

ssateneth

legendary

Activity: 1344

Merit: 1004

Quote from: crazyates on June 15, 2012, 10:43:52 PM

Or you can just download all previous versions straight from AMD... That's what I usually do.

http://developer.amd.com/sdks/AMDAPPSDK/downloads/pages/AMDAPPSDKDownloadArchive.aspx

thing is, the 2.1 on that site comes bundled with a bunch of shit that you don't need. my link gives just 2.1, nothing else.

-ck

legendary

Activity: 4088

Merit: 1631

Ruu \o/

Quote from: ajstar on June 16, 2012, 03:13:04 AM

Quote from: cmg5461 on June 13, 2012, 02:14:35 PM

32bit windows CANNOT run more than 4 cards. Install 64bit.

Where exactly is the restriction? In number of phycical cards or number of chips?
I understand that it's imposible to fit 5 5830s in W7 32 bit, but is it possible to fit there for example three 5970s?

It's an AMD driver limitation.

ajstar

newbie

Activity: 22

Merit: 0

Quote from: cmg5461 on June 13, 2012, 02:14:35 PM

32bit windows CANNOT run more than 4 cards. Install 64bit.

Where exactly is the restriction? In number of phycical cards or number of chips?
I understand that it's imposible to fit 5 5830s in W7 32 bit, but is it possible to fit there for example three 5970s?

bitlane

sr. member

Activity: 462

Merit: 250

I heart thebaron

For my 5830's, I run CAT 11.12 & SDK 2.1 (Win7 x64)...voltage and clock control using CGMIner 2.4.1.

Undervolted Sapphire Extreme 5830 (880 Mhz GPU, 180 Mhz MEM, 1.049 V) = 285-287 MH/s per card.

5x 5830 + 1x 5770

crazyates

legendary

Activity: 952

Merit: 1000

Or you can just download all previous versions straight from AMD... That's what I usually do.

http://developer.amd.com/sdks/AMDAPPSDK/downloads/pages/AMDAPPSDKDownloadArchive.aspx

ssateneth

legendary

Activity: 1344

Merit: 1004

Quote from: Dalkore on June 15, 2012, 10:42:53 AM

Quote from: ssateneth on June 15, 2012, 04:22:16 AM

Just use x64 OS. Looks like you're using windows, thats fine. 11.12 or 12.1 driver, use 2.1 SDK too, its fastest with all 5xxx cards. 2.4/2.5 about 3% slower.

What SDK comes in 11.12. I am not using an SDK currently. I am getting around 260 m/hash per card. I did upgrade to 64bit.

Dal

11.12 comes with 2.5 SDK (ok), or 2.6 SDK (slow and really bad), don't remember. I want to say 2.6. I use SDK interchangeably with whatever the opencl platform is called (ATI Stream, AMD APP, etc). If you can mine, you are using some sort of opencl platform (or what I call an SDK). Run GPU Caps Viewer to find out what version SDK you have installed, or if you use cgminer, there is some sort of argument you can run to show your sdk too. Regardless, you want 2.1 SDK. https://dl.dropbox.com/u/9768004/ATIStreamSDK_dev.msi is the installer for 2.1 SDK. If you are truly paranoid about "omg i dont know this guy, must be a virus", here is a virustotal. https://www.virustotal.com/file/aa448734c688092349510d75350cc006fea470a4ec2bfe6c56a3e7ac31d545fb/analysis/1339811371/

Dalkore

legendary

Activity: 1330

Merit: 1026

Mining since 2010 & Hosting since 2012

Quote from: ssateneth on June 15, 2012, 04:22:16 AM

Just use x64 OS. Looks like you're using windows, thats fine. 11.12 or 12.1 driver, use 2.1 SDK too, its fastest with all 5xxx cards. 2.4/2.5 about 3% slower.

What SDK comes in 11.12. I am not using an SDK currently. I am getting around 260 m/hash per card. I did upgrade to 64bit.

Dal

oldDirty

full member

Activity: 182

Merit: 100

roundhouseminer

Did we talk about he PCI Latency timer?
Go to MoBo Bios, search for PCI-lateny settings, change from 64 to 128.

ssateneth

legendary

Activity: 1344

Merit: 1004

Just use x64 OS. Looks like you're using windows, thats fine. 11.12 or 12.1 driver, use 2.1 SDK too, its fastest with all 5xxx cards. 2.4/2.5 about 3% slower.

crazyates

legendary

Activity: 952

Merit: 1000

Quote from: Dalkore on June 14, 2012, 01:54:32 PM

I might have too. Currently I am loading 64bit because someone mention a limit on gpus in 32bit. Then I am going to install Catalyst 11.12 and AB 2.2.1 and then see if the miner will run before I do any gpus changes.

Why are you installing AB if you're going to use CGMiner? CGMiner can handle all the overclock, undervolt, temp monitoring, and fan speed control with no problems on your cards.

Dalkore

legendary

Activity: 1330

Merit: 1026

Mining since 2010 & Hosting since 2012

I might have too. Currently I am loading 64bit because someone mention a limit on gpus in 32bit. Then I am going to install Catalyst 11.12 and AB 2.2.1 and then see if the miner will run before I do any gpus changes.

Dargo

legendary

Activity: 1820

Merit: 1000

Or you could just install linux - that will of course be cheaper than buying of copy of windows 64bit if that's what you will need to do. Even if you don't have experience with linux, it's very easy. Just install some version of ubuntu 11.04 64bit and follow member kano's instructions (linked in his signature) for installing CGminer. My favorite distro for this is Peppermint Two (based on Lubuntu 11.04), which is very lightweight and newb-friendly.

Dalkore

legendary

Activity: 1330

Merit: 1026

Mining since 2010 & Hosting since 2012

Quote from: crazyates on June 13, 2012, 01:53:13 PM

Quote from: Dalkore on June 13, 2012, 01:29:04 PM

Quote from: crazyates on June 13, 2012, 01:11:59 PM

I believe the best combination for 5830s is 11.12 with SDK 2.5.

Try using these settings in CGMiner instead:

Quote

--gpu-vddc 0.953 --gpu-engine 600-900 --gpu-memclock 300 --gpu-fan 25-75 --auto-fan --auto-gpu -v 2 -w 256 -I 8

If those settings still don't work, try bumping up the voltages by .01 at a time, or lowering the clock by 10MHz at a time. It's been a while since I mined on a 5830, so I'm not exactly sure what the exact Volts and core MHz settings were. Each card is different, too, so you could go higher, or you might have to go lower.

It is freezing before I can even open CG. I thought Catalyst 11.X.X and higher came with the SDK in the package?

It's freezing after you set the voltages in AB, but before you can open CGMiner?

Yes.

cmg5461 - Good point, I only have 4 cards now because I need to figure out how to mount the 5th. But now I need to install 64bit it seems.

cmg5461

sr. member

Activity: 369

Merit: 250

32bit windows CANNOT run more than 4 cards. Install 64bit.

crazyates

legendary

Activity: 952

Merit: 1000

Quote from: Dalkore on June 13, 2012, 01:29:04 PM

Quote from: crazyates on June 13, 2012, 01:11:59 PM

I believe the best combination for 5830s is 11.12 with SDK 2.5.

Try using these settings in CGMiner instead:

Quote

--gpu-vddc 0.953 --gpu-engine 600-900 --gpu-memclock 300 --gpu-fan 25-75 --auto-fan --auto-gpu -v 2 -w 256 -I 8

If those settings still don't work, try bumping up the voltages by .01 at a time, or lowering the clock by 10MHz at a time. It's been a while since I mined on a 5830, so I'm not exactly sure what the exact Volts and core MHz settings were. Each card is different, too, so you could go higher, or you might have to go lower.

It is freezing before I can even open CG. I thought Catalyst 11.X.X and higher came with the SDK in the package?

It's freezing after you set the voltages in AB, but before you can open CGMiner?

Dalkore

legendary

Activity: 1330

Merit: 1026

Mining since 2010 & Hosting since 2012

Quote from: crazyates on June 13, 2012, 01:11:59 PM

I believe the best combination for 5830s is 11.12 with SDK 2.5.

Try using these settings in CGMiner instead:

Quote

--gpu-vddc 0.953 --gpu-engine 600-900 --gpu-memclock 300 --gpu-fan 25-75 --auto-fan --auto-gpu -v 2 -w 256 -I 8

If those settings still don't work, try bumping up the voltages by .01 at a time, or lowering the clock by 10MHz at a time. It's been a while since I mined on a 5830, so I'm not exactly sure what the exact Volts and core MHz settings were. Each card is different, too, so you could go higher, or you might have to go lower.

It is freezing before I can even open CG. I thought Catalyst 11.X.X and higher came with the SDK in the package?

crazyates

legendary

Activity: 952

Merit: 1000

You didn't mention what SDK you're using.

As far as crashing, I'd also say you're trying to use AB to undervolt too far.

I believe the best combination for 5830s is 11.12 with SDK 2.5.

CGMiner can undervolt, orverclock, monitor temps, and control fan speed on those 58xx cards right out of the box - no need for AB. Uninstall it.

Try using these settings in CGMiner instead:

Quote

--gpu-vddc 0.953 --gpu-engine 600-900 --gpu-memclock 300 --gpu-fan 25-75 --auto-fan --auto-gpu -v 2 -w 256 -I 8

If those settings still don't work, try bumping up the voltages by .01 at a time, or lowering the clock by 10MHz at a time. It's been a while since I mined on a 5830, so I'm not exactly sure what the exact Volts and core MHz settings were. Each card is different, too, so you could go higher, or you might have to go lower.

Dalkore

legendary

Activity: 1330

Merit: 1026

Mining since 2010 & Hosting since 2012

I has to reinstall the OS on this box so here is what I have:

Win7 (32 bit)
Catalyst 11.11
AB 2.2.1
CGMiner

Problem: After I get to the desktop and its running for 1min, it hard freezes. I am thinking it is a the video driver. Is 11.11 what I should be using for a 5-5830 GPU setup? Also, to undervolt, so I still edit the config file in AB and use "UnofficialOverclock =2" setting, then open the app, downclock the memory, close app and then delete all the profiles with "VEN"?

This is what I did up to the point it started freezing.

Much appreciated,
Dalkore

Topic: Is this a configuration (driver) good setup for running a (5) 5830 miner? (Read 1918 times)