Topic: Issues using all neoscrypt miners except nsg (Read 390 times)
nvm mod can delete, an answer on another thread helped. Switched to KlausT/ccminer running neoscrypt algo and now get 700Kh/s on TZC.
I'm having some troubles with the miners, I'm new to mining (2 days) but decent with computers. I'm wondering if anyone has seen anything like it while mining TZC. I'm running a NVIDIA GTX 1060 6gb, and my OS is linux ubuntu 16.04. The only miner I can get to work and mine TZC is nsg, but I'm only getting like 200-400khash/s and it can be pretty volatile, usually read higher when I just launch (see 526Khash/s in Example1). Pretty much I am getting 50 TZC a day, and i'm using tzcpool.xyz pool. I get the Stratum from pool 0 notifications a lot. If I add neoscyrpt to the code, the miner launches, but I keep getting stratum from pool 0 notifications and I receive no TZC (also states 0Khash/s) even though it says accepted blocks (see Example 2). Now if I try to using ccminer-neoscrypt, it appears I am mining, but again I do receive any TZC or show a hashrate in my mining pool, and I also continually have the accepted hashes rejected due to "low difficulty" (see Example 3). Finally, if I try using the original ccminer forked from tpruvot/ccminer, the code fails to compile when using ./build.sh (Example 4.). I legit can't win here, and nsg is the only algorithm that works, so I can't test to if using a different algorithm will give me a better return with my GPU. Anyone have any suggestions?
Example 1:
./nsgminer -o stratum+tcp://stratum.tzcpool.xyz:3026 -u -p
Block: 0x4047ED889A255256... [20:37:24] Diff:39.1K Best:70
--------------------------------------------------------------------------------
[P]ool management [G]PU managementettings [D]isplay options [Q]uit
OCL 0: 53.0C 16% | 375.0 379.8 526.3 KH/s | A:6 R:0 HW:0 U:2.1/m
--------------------------------------------------------------------------------
[20:35:20] Accepted 529A385A7B000000x0 Diff 33.206/32.000 OCL 0
[20:35:37] The network difficulty has been set to 39599
[20:35:37] Stratum from pool 0 detected new block
[20:36:32] Stratum from pool 0 requested work restart
[20:36:49] Accepted 799543C746000000x0 Diff 57.871/32.000 OCL 0
[20:36:50] Stratum from pool 0 detected new block
[20:37:10] Accepted B49382AD54000000x0 Diff 48.372/5.393 OCL 0
Example 2:
./nsgminer --neoscrypt -o stratum+tcp://stratum.tzcpool.xyz:3026 -u -p
[P]ool management [G]PU managementettings [D]isplay options [Q]uit
OCL 0: 47.0C | 64.3 228.3 0.0 KH/s | A:0 R:0 HW:0 U:0.0/m
--------------------------------------------------------------------------------
[20:18:51] Probing for an alive pool
[20:18:52] The network difficulty has been set to 63361
[20:18:52] Stratum from pool 0 detected new block
[20:18:52] Disabling extra threads due to dynamic mode.
[20:18:52] Tune dynamic intensity with --gpu-dyninterval
[20:18:53] Thread 1 being disabled
[20:19:18] The network difficulty has been set to 63397
[20:19:18] Stratum from pool 0 detected new block
[20:19:18] Pool 0 is hiding block contents from us
[20:19:40] Stratum from pool 0 detected new block
[20:20:03] Stratum from pool 0 detected new block
[20:37:24] The network difficulty has been set to 39142
[20:37:24] Stratum from pool 0 detected new block
[20:37:30] Accepted 25AC98D20F010000x0 Diff 15.069/5.393 OCL 0
[20:37:35] Accepted 97DBF10C3A000000x0 Diff 70.559/5.393 OCL 0
[20:37:35] Accepted 2F2B10B83D000000x0 Diff 66.365/5.393 OCL 0
Example 3:
./ccminer -o stratum+tcp://stratum.tzcpool.xyz:3026 -u -p
Compiled with GCC 5.4 using Nvidia CUDA Toolkit 9.0
[2017-10-16 20:21:16] Starting Stratum on stratum+tcp://stratum.tzcpool.xyz:3026
[2017-10-16 20:21:16] NVML GPU monitoring enabled.
[2017-10-16 20:21:16] 1 miner thread started, using '' algorithm.
[2017-10-16 20:21:16] Binding thread 0 to cpu 0 (mask 1)
[2017-10-16 20:21:16] Stratum difficulty set to 512
[2017-10-16 20:21:18] stratum time is at least 25s in the future
[2017-10-16 20:21:18] stratum.tzcpool.xyz:3026 block 60084
[2017-10-16 20:21:38] stratum time is at least 66s in the future
[2017-10-16 20:21:38] stratum.tzcpool.xyz:3026 block 60085
[2017-10-16 20:21:38] GPU #0: GeForce GTX 1060 6GB, 845 (T= 55C F= 18% C=1974/3$
[2017-10-16 20:22:07] GPU #0: GeForce GTX 1060 6GB, 853 (T= 56C F= 40% C=1974/3$
[2017-10-16 20:22:38] GPU #0: GeForce GTX 1060 6GB, 845 (T= 56C F= 41% C=1974/3$
[2017-10-16 20:22:38] GPU #0: GeForce GTX 1060 6GB, 269 (T= 56C F= 41% C=1974/3$
[2017-10-16 20:22:38] accepted: 0/1 (0.00%), 711.52 kH/s nooooo
[2017-10-16 20:22:38] reject reason: low difficulty share of 0.0000268103112399$
[2017-10-16 20:22:43] GPU #0: GeForce GTX 1060 6GB, 838 (T= 56C F= 41% C=1974/3$
[2017-10-16 20:22:44] accepted: 0/2 (0.00%), 732.54 kH/s nooooo
[2017-10-16 20:22:44] reject reason: low difficulty share of 0.0000319365542075$
[2017-10-16 20:23:13] GPU #0: GeForce GTX 1060 6GB, 850 (T= 56C F= 41% C=1974/3$
[2017-10-16 20:23:18] GPU #0: GeForce GTX 1060 6GB, 859 (T= 56C F= 41% C=1974/3$
[2017-10-16 20:23:18] accepted: 0/3 (0.00%), 762.96 kH/s nooooo
[2017-10-16 20:23:18] reject reason: low difficulty share of 0.0000186179975896$
[2017-10-16 20:23:28] Stratum difficulty set to 384
Example 4:
#ccminer-original, forked from tpruvot/ccminer. followed the linux install instructions exactly.
$ ./autogen.sh
$ ./configure
$ ./build.sh
#So here is a line or two above the error, after running ./build.sh
txas info : Function properties for _Z26x11_shavite512_gpu_hash_64jjPmPj
0 bytes stack frame, 0 bytes spill stores, 0 bytes spill loads
ptxas info : Used 72 registers, 4096 bytes smem, 344 bytes cmem[0], 72 bytes cmem[2]
make[2]: Leaving directory '/home/bigdata/Desktop/ccmine-orig/ccminer'
Makefile:2196: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '/home/bigdata/Desktop/ccmine-orig/ccminer'
Makefile:651: recipe for target 'all' failed
make: *** [all] Error 2
Example 1:
./nsgminer -o stratum+tcp://stratum.tzcpool.xyz:3026 -u -p
Block: 0x4047ED889A255256... [20:37:24] Diff:39.1K Best:70
--------------------------------------------------------------------------------
[P]ool management [G]PU management
OCL 0: 53.0C 16% | 375.0 379.8 526.3 KH/s | A:6 R:0 HW:0 U:2.1/m
--------------------------------------------------------------------------------
[20:35:20] Accepted 529A385A7B000000x0 Diff 33.206/32.000 OCL 0
[20:35:37] The network difficulty has been set to 39599
[20:35:37] Stratum from pool 0 detected new block
[20:36:32] Stratum from pool 0 requested work restart
[20:36:49] Accepted 799543C746000000x0 Diff 57.871/32.000 OCL 0
[20:36:50] Stratum from pool 0 detected new block
[20:37:10] Accepted B49382AD54000000x0 Diff 48.372/5.393 OCL 0
Example 2:
./nsgminer --neoscrypt -o stratum+tcp://stratum.tzcpool.xyz:3026 -u -p
[P]ool management [G]PU management
OCL 0: 47.0C | 64.3 228.3 0.0 KH/s | A:0 R:0 HW:0 U:0.0/m
--------------------------------------------------------------------------------
[20:18:51] Probing for an alive pool
[20:18:52] The network difficulty has been set to 63361
[20:18:52] Stratum from pool 0 detected new block
[20:18:52] Disabling extra threads due to dynamic mode.
[20:18:52] Tune dynamic intensity with --gpu-dyninterval
[20:18:53] Thread 1 being disabled
[20:19:18] The network difficulty has been set to 63397
[20:19:18] Stratum from pool 0 detected new block
[20:19:18] Pool 0 is hiding block contents from us
[20:19:40] Stratum from pool 0 detected new block
[20:20:03] Stratum from pool 0 detected new block
[20:37:24] The network difficulty has been set to 39142
[20:37:24] Stratum from pool 0 detected new block
[20:37:30] Accepted 25AC98D20F010000x0 Diff 15.069/5.393 OCL 0
[20:37:35] Accepted 97DBF10C3A000000x0 Diff 70.559/5.393 OCL 0
[20:37:35] Accepted 2F2B10B83D000000x0 Diff 66.365/5.393 OCL 0
Example 3:
./ccminer -o stratum+tcp://stratum.tzcpool.xyz:3026 -u -p
Compiled with GCC 5.4 using Nvidia CUDA Toolkit 9.0
[2017-10-16 20:21:16] Starting Stratum on stratum+tcp://stratum.tzcpool.xyz:3026
[2017-10-16 20:21:16] NVML GPU monitoring enabled.
[2017-10-16 20:21:16] 1 miner thread started, using '' algorithm.
[2017-10-16 20:21:16] Binding thread 0 to cpu 0 (mask 1)
[2017-10-16 20:21:16] Stratum difficulty set to 512
[2017-10-16 20:21:18] stratum time is at least 25s in the future
[2017-10-16 20:21:18] stratum.tzcpool.xyz:3026 block 60084
[2017-10-16 20:21:38] stratum time is at least 66s in the future
[2017-10-16 20:21:38] stratum.tzcpool.xyz:3026 block 60085
[2017-10-16 20:21:38] GPU #0: GeForce GTX 1060 6GB, 845 (T= 55C F= 18% C=1974/3$
[2017-10-16 20:22:07] GPU #0: GeForce GTX 1060 6GB, 853 (T= 56C F= 40% C=1974/3$
[2017-10-16 20:22:38] GPU #0: GeForce GTX 1060 6GB, 845 (T= 56C F= 41% C=1974/3$
[2017-10-16 20:22:38] GPU #0: GeForce GTX 1060 6GB, 269 (T= 56C F= 41% C=1974/3$
[2017-10-16 20:22:38] accepted: 0/1 (0.00%), 711.52 kH/s nooooo
[2017-10-16 20:22:38] reject reason: low difficulty share of 0.0000268103112399$
[2017-10-16 20:22:43] GPU #0: GeForce GTX 1060 6GB, 838 (T= 56C F= 41% C=1974/3$
[2017-10-16 20:22:44] accepted: 0/2 (0.00%), 732.54 kH/s nooooo
[2017-10-16 20:22:44] reject reason: low difficulty share of 0.0000319365542075$
[2017-10-16 20:23:13] GPU #0: GeForce GTX 1060 6GB, 850 (T= 56C F= 41% C=1974/3$
[2017-10-16 20:23:18] GPU #0: GeForce GTX 1060 6GB, 859 (T= 56C F= 41% C=1974/3$
[2017-10-16 20:23:18] accepted: 0/3 (0.00%), 762.96 kH/s nooooo
[2017-10-16 20:23:18] reject reason: low difficulty share of 0.0000186179975896$
[2017-10-16 20:23:28] Stratum difficulty set to 384
Example 4:
#ccminer-original, forked from tpruvot/ccminer. followed the linux install instructions exactly.
$ ./autogen.sh
$ ./configure
$ ./build.sh
#So here is a line or two above the error, after running ./build.sh
txas info : Function properties for _Z26x11_shavite512_gpu_hash_64jjPmPj
0 bytes stack frame, 0 bytes spill stores, 0 bytes spill loads
ptxas info : Used 72 registers, 4096 bytes smem, 344 bytes cmem[0], 72 bytes cmem[2]
make[2]: Leaving directory '/home/bigdata/Desktop/ccmine-orig/ccminer'
Makefile:2196: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '/home/bigdata/Desktop/ccmine-orig/ccminer'
Makefile:651: recipe for target 'all' failed
make: *** [all] Error 2
Jump to: