Author

Topic: Issues with bitcoin electrum transaction please help (Read 162 times)

newbie
Activity: 7
Merit: 10
Thank you all for the help i just took a look at memoppol and the rates now are around 120 sata i think ill just wait little more as suggested and let you guys know what happen.
legendary
Activity: 2380
Merit: 5213
yesterday i bumped the fee too 150 sata and today i bumped it to 200 sata and also accelerated it on several places blockchain.com says the transaction is invalid. and viabtc says transaction unconfirmed. should i bump it to 250 or 300 sata?
To add to o_e_l_e_o's reply:

With increasing the fee rate of the CPFP transaction to 250 sat/vbyte, you would increase the effective fee rate of your transactions to around 48 sat/vbyte.
Now, such amount of fee rate would put your transactions around 0.5 vMB from the tip of the mempool and would likely give you fast confirmation.

Note that that the required fee rate may increase or decrease before you read this post.
legendary
Activity: 2268
Merit: 18711
yesterday i bumped the fee too 150 sata and today i bumped it to 200 sata and also accelerated it on several places blockchain.com says the transaction is invalid. and viabtc says transaction unconfirmed. should i bump it to 250 or 300 sata?
Up to you.

ViaBTC's free accelerator won't work for you since the parent is unconfirmed, as I said above, and the paid accelerator will cost more than just doing what you are doing. Other free accelerators are scams that don't accelerate anything at all, they simply rebroadcast your transaction. Blockchain.com says the transaction is invalid because their node has dropped your unconfirmed parent, but that doesn't matter since most other explorers still have it.

The effective fee rate of your two transactions is now 39.4 sats/vbyte, which is currently around 10 MvB from the tip of the mempool. Unfortunately for you the mempool filled up a bit over the last 24 hours. You've already been waiting a month for this to confirm though, so if it were me I would just be patient for another day or two rather than spend more money to bump the fee even more, but it's up to you.
newbie
Activity: 7
Merit: 10
I can see that you've replaced the CPFP transaction with a new one paying 151 sats/vbyte in fees, taking the combined fee rate for your two transactions up to 30 sats/vbyte.

That's not going to confirm within the next few hours, but if you are lucky it might confirm within the next day or two. Transactions with that fee rate confirmed at around 00.00 - 02.00 UTC the last two days.


201 sata now.
newbie
Activity: 7
Merit: 10
......but i can not increase fee to the main amount only to the fee i boosted with the first time should i increase that fee even thow the main transaction is not confirmed?
Now you have two transactions.
The first one was made by someone else to your address. The second one was made by yourself for doing CPFP and that's the one you can increase its fee.
With increasing the fee rate of the second transaction, you will increase the effective fee rate of the first transaction and they will be both confirmed at the same time.


yesterday i bumped the fee too 150 sata and today i bumped it to 200 sata and also accelerated it on several places blockchain.com says the transaction is invalid. and viabtc says transaction unconfirmed. should i bump it to 250 or 300 sata?
legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
I have made a transaction that the fee was charge 30 sat/byte ($1.4) and it was confirmed within the next 4 hours or something so, although i used a Viabtc free acceleration tools to speeding up my transaction..
If op don't mind he can use this service to see if that would work for him as well.
Are you using the free service or the paid one?  I'm curious how much you will need to pay for the paid service.

I tried it now to accelerate the OP transaction but it can't, it says, (Transaction fee is too low) which means this transaction didn't meet the free service category but I don't know how much you will pay for the paid service.

It might be the best option for OP to wait or use the paid service of that Bitcoin transaction accelerator.

over $100 worth of btc.  the paid service is almost never worth it at that price.


@ op. you knew do do a ton of different things.

yet you did not know that a 10 sat fee is pretty much worthless for the moment .

educate yourself about proper fee amounts.
legendary
Activity: 2492
Merit: 1232
I have made a transaction that the fee was charge 30 sat/byte ($1.4) and it was confirmed within the next 4 hours or something so, although i used a Viabtc free acceleration tools to speeding up my transaction..
If op don't mind he can use this service to see if that would work for him as well.
Are you using the free service or the paid one?  I'm curious how much you will need to pay for the paid service.

I tried it now to accelerate the OP transaction but it can't, it says, (Transaction fee is too low) which means this transaction didn't meet the free service category but I don't know how much you will pay for the paid service.

It might be the best option for OP to wait or use the paid service of that Bitcoin transaction accelerator.
legendary
Activity: 2268
Merit: 18711
If op don't mind he can use this service to see if that would work for him as well.
It won't, because the parent transaction is unconfirmed.
hero member
Activity: 1428
Merit: 653
Leading Crypto Sports Betting & Casino Platform
I can see that you've replaced the CPFP transaction with a new one paying 151 sats/vbyte in fees, taking the combined fee rate for your two transactions up to 30 sats/vbyte.

I have made a transaction that the fee was charge 30 sat/byte ($1.4) and it was confirmed within the next 4 hours or something so, although i used a Viabtc free acceleration tools to speeding up my transaction..
If op don't mind he can use this service to see if that would work for him as well.
legendary
Activity: 2268
Merit: 18711
I can see that you've replaced the CPFP transaction with a new one paying 151 sats/vbyte in fees, taking the combined fee rate for your two transactions up to 30 sats/vbyte.

That's not going to confirm within the next few hours, but if you are lucky it might confirm within the next day or two. Transactions with that fee rate confirmed at around 00.00 - 02.00 UTC the last two days.
legendary
Activity: 2380
Merit: 5213
......but i can not increase fee to the main amount only to the fee i boosted with the first time should i increase that fee even thow the main transaction is not confirmed?
Now you have two transactions.
The first one was made by someone else to your address. The second one was made by yourself for doing CPFP and that's the one you can increase its fee.
With increasing the fee rate of the second transaction, you will increase the effective fee rate of the first transaction and they will be both confirmed at the same time.
newbie
Activity: 7
Merit: 10
Ok had to turn of vpn for the servers to connect was just showing a red dot before but now i can see them but i can not increase fee to the main amount only to the fee i boosted with the first time should i increase that fee even thow the main transaction is not confirmed? electrum just give you the option increase fee not mention what method it uses. thank you all for the help.
legendary
Activity: 2268
Merit: 18711
the transaction was rejected by network rules. mandatory-script-verify-flag-failed (Script failed an OP_EQUALVERIFY operation)
This is the error received when you try to sign a transaction using the wrong private key.

010000000312e9cc0a757a6ae452639fceb2115a0a1e70c362ffaf7f0ebb295a8203c7ba0c69000 0001f14c6d832064a72269bacc9885a924f395cbf15154600081c66020000000000
This makes no sense. This is not a full transaction, and it is also trying to spend an output from this transaction: https://mempool.space/tx/0cbac703825a29bb0e7fafff62c3701e0a5a11b2ce9f6352e46a7a750acce912. What exactly did you do on Coinb.in?

I would go with hosseinimr93's suggestion of just using Electrum. Use one of the servers he has listed (I can confirm they all work for me and show me your transactions), and then use RBF to bump the fee of the CPFP transaction.
legendary
Activity: 2380
Merit: 5213
I tryed all servers on the list still not showing in my history keep in mind that i have delated it on electrum maybe that has something to do with it?. what to do next?.
Are you saying you removed the local transactions?
No problem. Once you connect to a server that has your transactions in its mempool, they will reappear and you will see them again.


I just created a watch-only wallet using your address and I could find many servers that had your transactions in their mempool.
Here are three of them.

Code:
fortress.qtornado.com:443
fulcrum.grey.pw:51002
electrum.turboblaster.it:50002
newbie
Activity: 7
Merit: 10
I tryed all servers on the list still not showing in my history keep in mind that i have delated it on electrum maybe that has something to do with it?. what to do next?.

legendary
Activity: 2380
Merit: 5213
The first transaction has been made with a very low fee rate. With making the CFPF transaction, you increased the effective fee rate to 10 sat/vbyte which is still insufficient for getting confirmation.

The fee rate used for the first transaction is lower than the purging fee rate for any node with default mempool size.
Therefore, some nodes have those transactions in their mempool and some don't have them.

If you want to see those transactions in your electrum wallet, you should try connecting to different servers until you find a one that have those transactions in their mempool.
After that, you will be able to bump the fee of the CPFP transaction.


If you are using the desktop version of electrum, click on the circle located at bottom right corner of window, right click on one of the servers listed there and select "Use as Server".
Try different servers until your transactions are displayed in the wallet.  

If you are using the mobile version of electrum, tap on the circle located at top right corner of the screen, go to "Network" and then "Server Settings". After that, tap on one of the servers listed there and then "OK".  
Try different servers until your transactions are displayed in the wallet.  
newbie
Activity: 7
Merit: 10
Do you have access (meaning control over the private keys) to the wallet that you used for

6ee23b95267d277b4a60082c9fe6c0ce9a21359e27386bb473474ad47899f765

The first transaction is an incoming transaction, while the second one is outgoing. Did you initiate both?

hello i have the private key for the one i send and for the receiving wallet i dident send the first one but according to the sender i am in full control of that one sins i could boost it without any issues the sender told me that they used some service where they cant increase the fee. it showed as local on my wallet.
staff
Activity: 3500
Merit: 6152
Do you have access (meaning control over the private keys) to the wallet that you used for

6ee23b95267d277b4a60082c9fe6c0ce9a21359e27386bb473474ad47899f765

The first transaction is an incoming transaction, while the second one is outgoing. Did you initiate both?
newbie
Activity: 7
Merit: 10
Hello

Hope you all are fine and all is good i had an issue with a bitcoin transaction of 360 usd with a low transaction fee 2.3 sata it never got confirmed.
and was showing as local transaction id:

6ee23b95267d277b4a60082c9fe6c0ce9a21359e27386bb473474ad47899f765

i try to boost it with transaction:

c0a72a0e758a3c793d6a5de55bae9abdb12365eacb298a959b628c22ce809e2d

it dident work so i deleted it from my electrum wallet and that dident work ether now not showing transaction and amount in wallet.
i have try to rebuild the transaction and increase the fee on coinb.in but get this message all time.

the transaction was rejected by network rules. mandatory-script-verify-flag-failed (Script failed an OP_EQUALVERIFY operation) [010000000312e9cc0a757a6ae452639fceb2115a0a1e70c362ffaf7f0ebb295a8203c7ba0c690000001f14c6d832064a72269bacc9885a924f395cbf15154600081c66020000000000

do anybody know what to do i cant increase the fee sins the transaction is not showing in the wallet. thanks for the help.
Jump to: