Read carefully what I have wrote again, and do everything step by step, as I have described. You will find more settings to configure under DHCP, when you enable the advanced option. There should be lease period setting in there. Give me a screenshot, though.
Dynamic Host Configuration Protocol (DHCP) will lease you IPs for a given time period. What we want to achieve here, is that you will have your router 149 addresses reserved for DHCP use, and another 104 for static use, so your DHCP won't mess with your miners.
Topic: Issues with multiple miners... Please help (Read 1254 times)
Are you suggesting it is an issue with GHash?
what pool do you recommend?
what pool do you recommend?
Any other than ghash. Here are some suggestions. These are my favorites, with the same order I have setup my miners failover:
BTCGuild - 2% PPLNS
F2Pool - 4% PPS
Eligius - 0% CPPSRB
p2pool - 0% PPLNS
Slush - 2% Exponentaly scored
You can find more pools here.
As for S1s. I would recommend to use wired connection instead of wireless. Anyway do the following:
- check the setting which says "I would like to configure DHCP settings" in your router, click Apply
- put the DHCP lease time to 24H
- put End IP address to 150, click Apply
- configure your miners for static addresses above 192.168.0.150
Example:
Code:
#1 S1 - 192.168.0.151
#2 S1 - 192.168.0.152
Terraminer - 192.168.0.153
Give me the screenshot of your DHCPs configurable settings, maybe there will be more to tweak.
Good luck!
I have 4 ant's and my terraminer hooked up to a switch. the terraminer and ant's 1&2 are hashing away at full speed. ant's 3&4 power on but don't hash, and don't show on my worker pool (I also tried a 5th ant, same result). I can't find an option to set the "DHCP lease time." I am going to change the IP addresses to 150 and above now. Also, I am confused... If I set "ending IP address" to 150, and then put all my addresses above 150, doesn't that put my IP addresses outside the useable range? or am I misunderstanding something?
Thank you for the help, I really would like to get these up and running ASAP. Time is money. And the blockchain needs us! ;-)
polmine.pl 1% pps and nmc merged mining
best pool ever
i dont care about pool luck i love pps
we have almost 2 ph now
best pool ever
i dont care about pool luck i love pps
we have almost 2 ph now
Are you suggesting it is an issue with GHash?
what pool do you recommend?
what pool do you recommend?
Any other than ghash. Here are some suggestions. These are my favorites, with the same order I have setup my miners failover:
BTCGuild - 2% PPLNS
F2Pool - 4% PPS
Eligius - 0% CPPSRB
p2pool - 0% PPLNS
Slush - 2% Exponentaly scored
You can find more pools here.
As for S1s. I would recommend to use wired connection instead of wireless. Anyway do the following:
- check the setting which says "I would like to configure DHCP settings" in your router, click Apply
- put the DHCP lease time to 24H
- put End IP address to 150, click Apply
- configure your miners for static addresses above 192.168.0.150
Example:
Code:
#1 S1 - 192.168.0.151
#2 S1 - 192.168.0.152
Terraminer - 192.168.0.153
Give me the screenshot of your DHCPs configurable settings, maybe there will be more to tweak.
Good luck!
Are you suggesting it is an issue with GHash?
what pool do you recommend?
what pool do you recommend?
I have two antminer s1's. both are hashing, but only one shows on my ghash worker pool.
That is the primary issue I am trying to resolve.
That is the primary issue I am trying to resolve.
I would stay away from GHASH...
I have two antminer s1's. both are hashing, but only one shows on my ghash worker pool.
That is the primary issue I am trying to resolve.
That is the primary issue I am trying to resolve.
Everything seems fine to me. Try to put 8.8.8.8 and 8.8.4.4 as your DNS, see if that helps. What are your other miners? I can see only 1 Terraminer connected.
Are the other miners connected through wifi?
Use the BBCode or Linked BBCode from imgur's links to post correctly.
How do I post a screenshot? The "insert image" button doesn't allow me to upload from my computer...
Press prt sc then paste in imgur.com. Insert the link here.
How do I post a screenshot? The "insert image" button doesn't allow me to upload from my computer...
About halfway down "psahx" says to:
My answer was regarded to a totally different issue.
Try to identify your problem first, I would go with router settings, to see if there is something preventing more than X number of connections. Provide a bit more info about your network settings, miner IPs and stuff. I will try to help you.
EDIT: A screenshot of your routers LAN and DHCP config would be helpful too.
Just my two cents. Running these things on 240V power and in a cool environment are crucial to running stable(read, 'working').
Code:
Please put excruciatingly long posts in between tags like this.
Here are the "stats" from my Terraminer
MOD EDIT: Put into code tags
Code:
STATUS
STATUS
S
When
1406868106
Code
11
Msg
Summary
Description
cgminer 4.1.0
SUMMARY
0
SUMMARY
Elapsed
138
MHS av
985713.05
MHS 5s
12194.92
Found Blocks
0
Getworks
7
Accepted
21
Rejected
0
Hardware Errors
0
Utility
9.13
Discarded
98
Stale
0
Get Failures
0
Local Work
872
Remote Failures
0
Network Blocks
2
Total MH
136064563.9373
Work Utility
13784.16
Difficulty Accepted
21504.00000000
Difficulty Rejected
0.00000000
Difficulty Stale
0.00000000
Best Share
36841
Device Hardware%
0.0000
Device Rejected%
0.0000
Pool Rejected%
0.0000
Pool Stale%
0.0000
Last getwork
1406868105
[+]
Devices
[+]
Pools
[-]
Stats
STATUS
STATUS
S
When
1406868100
Code
70
Msg
CGMiner stats
Description
cgminer 4.1.0
STATS0
STATS
0
ID
CTA0
Elapsed
132
Calls
0
Wait
0.000000
Max
0.000000
Min
99999999.000000
HW Revision
4
Serial
120722455
Asics
2
Dies
8
Cores
960
Board number
1
FW Revision
0.4.5
FW Date
2014-03-14
Init diffbits
32
Min diffbits
0
Max diffbits
63
CoreTemp0
8096
CoreTemp1
6669
CoreTemp2
8140
CoreTemp3
7924
CoreTemp4
8690
CoreTemp5
7598
CoreTemp6
9217
CoreTemp7
8655
Ambient Low
5275
Ambient Avg
5431
Ambient High
5525
PumpRPM0
3008
PumpRPM1
3038
FanRPM0
4534
FanRPM1
4599
FanRPM2
4029
FanRPM3
0
CoreFreqs0
850
CoreFreqs1
850
CoreFreqs2
850
CoreFreqs3
850
CoreFreqs4
850
CoreFreqs5
850
CoreFreqs6
850
CoreFreqs7
850
CoreVolts0
679
CoreVolts1
668
CoreVolts2
668
CoreVolts3
671
CoreVolts4
684
CoreVolts5
666
CoreVolts6
673
CoreVolts7
673
Volts3.3
3175
Volts12
11997
Inactive
30
Active
33
CorePerfMode0
107
CorePerfMode1
107
CorePerfMode2
107
CorePerfMode3
107
CorePerfMode4
107
CorePerfMode5
107
CorePerfMode6
107
CorePerfMode7
107
FanSpeed0
255
FanSpeed1
255
FanSpeed2
255
FanSpeed3
255
DiesActive
8
PipesEnabled0
120
PipesEnabled1
120
PipesEnabled2
120
PipesEnabled3
120
PipesEnabled4
120
PipesEnabled5
120
PipesEnabled6
120
PipesEnabled7
120
Underruns
36640
HWErrors0
0
HWErrors1
0
HWErrors2
0
HWErrors3
0
HWErrors4
0
HWErrors5
0
HWErrors6
0
HWErrors7
0
Calc hashrate
471553763924
Hashrate
472498924925
Share hashrate
504849869737
Total calc hashes
62261638472487
Total hashes
62386432879997
Total raw hashes
62386432879997
Total share hashes
66657892433920
Total flushed hashes
34359737408
Accepted hashes
57174604644352
Accepted hashrate
433025867651
Rejected hashes
0
Rejected hashrate
0
Core0 hashrate
60554687839
Core1 hashrate
70647135812
Core2 hashrate
56517708650
Core3 hashrate
74684115002
Core4 hashrate
70647135812
Core5 hashrate
55508463852
Core6 hashrate
57526953447
Core7 hashrate
44406771082
Uptime
143646
Asic0Core0
48:68067e7ac720431a013288804228ae6c
Asic0Core1
52:8598160870640016387a6978fcda2478
Asic0Core2
42:11308a488552aa60a540910205ae2a22
Asic0Core3
52:d1e2281254946a2894c66016914aeef0
Asic1Core0
52:8d0428fc001459600df2f1981e0aa0fe
Asic1Core1
46:2d3042d27d04502a10ccf9e00900c8a4
Asic1Core2
42:4e44e61a9124100204a00a0650b45ba2
Asic1Core3
36:88c2612404082924904456e0c054c008
AV
8
Power Supply Percent
87
Power Used
8000
IOUT
8000
VOUT
1196
IIN
903
VIN
11650
PSTemp1
2612
PSTemp2
4025
USB Pipe
0
USB Delay
r0 0.000000 w0 0.000000
USB tmo
1839 50=0/0/0/0/0 100=0/0/0/0/0 500=2/1091/1092/1783/400
STATS1
STATS
1
ID
CTA1
Elapsed
132
Calls
0
Wait
0.000000
Max
0.000000
Min
99999999.000000
HW Revision
4
Serial
120722456
Asics
2
Dies
8
Cores
960
Board number
0
FW Revision
0.4.5
FW Date
2014-03-14
Init diffbits
32
Min diffbits
0
Max diffbits
63
CoreTemp0
6872
CoreTemp1
7111
CoreTemp2
7760
CoreTemp3
7099
CoreTemp4
7464
CoreTemp5
7216
CoreTemp6
7323
CoreTemp7
7303
Ambient Low
5150
Ambient Avg
5168
Ambient High
5175
PumpRPM0
3026
PumpRPM1
3011
FanRPM0
0
FanRPM1
4477
FanRPM2
4268
FanRPM3
0
CoreFreqs0
850
CoreFreqs1
850
CoreFreqs2
850
CoreFreqs3
850
CoreFreqs4
850
CoreFreqs5
850
CoreFreqs6
850
CoreFreqs7
850
CoreVolts0
682
CoreVolts1
664
CoreVolts2
668
CoreVolts3
673
CoreVolts4
679
CoreVolts5
666
CoreVolts6
666
CoreVolts7
664
Volts3.3
3166
Volts12
12100
Inactive
31
Active
33
CorePerfMode0
107
CorePerfMode1
107
CorePerfMode2
107
CorePerfMode3
107
CorePerfMode4
107
CorePerfMode5
107
CorePerfMode6
107
CorePerfMode7
107
FanSpeed0
255
FanSpeed1
255
FanSpeed2
255
FanSpeed3
255
DiesActive
8
PipesEnabled0
120
PipesEnabled1
120
PipesEnabled2
120
PipesEnabled3
120
PipesEnabled4
120
PipesEnabled5
120
PipesEnabled6
120
PipesEnabled7
120
Underruns
25266
HWErrors0
0
HWErrors1
0
HWErrors2
0
HWErrors3
0
HWErrors4
0
HWErrors5
0
HWErrors6
0
HWErrors7
0
Calc hashrate
471533166356
Hashrate
472299431426
Share hashrate
525668421066
Total calc hashes
62258918871041
Total hashes
62360092740073
Total raw hashes
62360092740073
Total share hashes
69406671503360
Total flushed hashes
34359737408
Accepted hashes
35184372088832
Accepted hashrate
266477457016
Rejected hashes
0
Rejected hashrate
0
Core0 hashrate
55509837535
Core1 hashrate
68630344589
Core2 hashrate
72667423683
Core3 hashrate
55509837535
Core4 hashrate
74685963230
Core5 hashrate
59546916629
Core6 hashrate
59546916629
Core7 hashrate
63583995722
Uptime
140480
Asic0Core0
46:861a001404e4b932e42a2008de2234bc
Asic0Core1
48:420a04ae0ca01ddaadaaf40c9d420110
Asic0Core2
59:19489e9a6f78726c94509ec85f784034
Asic0Core3
42:52704280e38400322d50426407702e60
Asic1Core0
55:506429aca40ad460bec2911e8edccb14
Asic1Core1
42:e9d06c24c9004224871a812a0408c838
Asic1Core2
48:780e289c0c3273c2414061f021d2161a
Asic1Core3
47:a1a02cf04360285688cae80e10b88d90
AV
8
Power Supply Percent
83
Power Used
7675
IOUT
7675
VOUT
1198
IIN
900
VIN
11200
PSTemp1
2575
PSTemp2
3812
USB Pipe
0
USB Delay
r0 0.000000 w0 0.000000
USB tmo
1806 50=0/0/0/0/0 100=0/0/0/0/0 500=1/1103/1103/903/200
STATS2
STATS
2
ID
POOL0
Elapsed
132
Calls
0
Wait
0.000000
Max
0.000000
Min
99999999.000000
Pool Calls
0
Pool Attempts
0
Pool Wait
0.000000
Pool Max
0.000000
Pool Min
99999999.000000
Pool Av
0.000000
Work Had Roll Time
false
Work Can Roll
false
Work Had Expire
false
Work Roll Time
0
Work Diff
1024.00000000
Min Diff
1024.00000000
Max Diff
1024.00000000
Min Diff Count
850
Max Diff Count
850
Times Sent
24
Bytes Sent
2887
Times Recv
31
Bytes Recv
5927
Net Bytes Sent
2887
Net Bytes Recv
5927
STATS3
STATS
3
ID
POOL1
Elapsed
132
Calls
0
Wait
0.000000
Max
0.000000
Min
99999999.000000
Pool Calls
0
Pool Attempts
0
Pool Wait
0.000000
Pool Max
0.000000
Pool Min
99999999.000000
Pool Av
0.000000
Work Had Roll Time
false
Work Can Roll
false
Work Had Expire
false
Work Roll Time
0
Work Diff
1024.00000000
Min Diff
1024.00000000
Max Diff
1024.00000000
Min Diff Count
19
Max Diff Count
19
Times Sent
3
Bytes Sent
273
Times Recv
7
Bytes Recv
2356
Net Bytes Sent
273
Net Bytes Recv
2356
STATS4
STATS
4
ID
POOL2
Elapsed
132
Calls
0
Wait
0.000000
Max
0.000000
Min
99999999.000000
Pool Calls
0
Pool Attempts
0
Pool Wait
0.000000
Pool Max
0.000000
Pool Min
99999999.000000
Pool Av
0.000000
Work Had Roll Time
false
Work Can Roll
false
Work Had Expire
false
Work Roll Time
0
Work Diff
0.00000000
Min Diff
0.00000000
Max Diff
0.00000000
Min Diff Count
0
Max Diff Count
0
Times Sent
0
Bytes Sent
0
Times Recv
0
Bytes Recv
0
Net Bytes Sent
0
Net Bytes Recv
0
MOD EDIT: Put into code tags
My Terraminer IV starts up, runs for 2-3 minutes at full power (1.6 TH), and then stops hashing. That just started last night after trying for several hours to resolve my other issue...
Other issue is that I can't seem to get more than one miner to hash for any length of time. Before the Terraminer went tits-up, all 3 would turn on and start hashing, but after a few minutes, one would go inactive, and then an hour or so later another one would. I tried assigning different IP addresses to the Antminers (the terraminer is not a "static IP" so I don't know if that is part of the problem...).
I dug through the forums, and found this post about multiple antminers...https://bitcointalksearch.org/topic/two-s2-antminers-on-the-same-network-conflict-how-to-resolve-708895
About halfway down "psahx" says to:
"SSH into your S2, then
Code:
ifconfig lan0 down
macchanger -r lan0
ifconfig lan0 up
as I am not familiar with antminers, I hope they have some decent distro installed, which will have the macchanger. If not, you'll have to try to install it.
Code:
sudo apt-get update
sudo apt-get install macchanger macchanger-gtk"
I found out that SSH means to open a command window... I tried using PuTTY... No luck... It wouldn't connect with anything.
I am a complete noobie, with ZERO knowledge of IT, but am a quick learner. Any help would be appreciated. Thanks!
Other issue is that I can't seem to get more than one miner to hash for any length of time. Before the Terraminer went tits-up, all 3 would turn on and start hashing, but after a few minutes, one would go inactive, and then an hour or so later another one would. I tried assigning different IP addresses to the Antminers (the terraminer is not a "static IP" so I don't know if that is part of the problem...).
I dug through the forums, and found this post about multiple antminers...https://bitcointalksearch.org/topic/two-s2-antminers-on-the-same-network-conflict-how-to-resolve-708895
About halfway down "psahx" says to:
"SSH into your S2, then
Code:
ifconfig lan0 down
macchanger -r lan0
ifconfig lan0 up
as I am not familiar with antminers, I hope they have some decent distro installed, which will have the macchanger. If not, you'll have to try to install it.
Code:
sudo apt-get update
sudo apt-get install macchanger macchanger-gtk"
I found out that SSH means to open a command window... I tried using PuTTY... No luck... It wouldn't connect with anything.
I am a complete noobie, with ZERO knowledge of IT, but am a quick learner. Any help would be appreciated. Thanks!
Jump to: