Author

Topic: just bought GTX 1070 6 card after setup my PC see only 4 card (Read 509 times)

legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
İ disabled onboard gpu but PC still blackscreen.

Yes it is win10


So try doing the simple mining down load.

or buy a second mobo.
newbie
Activity: 21
Merit: 0
İ disabled onboard gpu but PC still blackscreen.

Yes it is win10
legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
once again if all fails get a 16gb usb stick and download from

https://simplemining.net/

this is the download link

https://simplemining.net/page/download

some mobos are fuck you

you could have 3 of the exact same mobos

with the exact same parts in every way

and all programmed exactly the same

and 1 of them will only do 5 of 6 or 4 of 6 cards.

I can help you try to do simple mining if everything you do fails.


I have about 22 rigs with 16 on simple mining and 6 on windows 10

BTW you are using windows 10 correct?
newbie
Activity: 29
Merit: 0
How can i disable onboard gpu? İ couldnt find this setting in bios

Advanced Mode:
Graphics Configuration:
iGPU Multi-Monitor - set to Disabled
newbie
Activity: 21
Merit: 0
How can i disable onboard gpu? İ couldnt find this setting in bios
newbie
Activity: 29
Merit: 0
As mentioned above try a Linux OS such as:

HiveOS: https://hiveos.farm/install/
Simplemining : https://simplemining.net/page/download
jr. member
Activity: 115
Merit: 4
there was a board that was doing that to me in the past, make sure all the unnecessary onboard devices are disabled(sound and stuff), also try disabling onboard gpu in bios and then plug all the gpus in while 4g decoding is disabled and try to turn it on after all the gpus installed
newbie
Activity: 21
Merit: 0
Virtual memory i did 60 GB but still black screen.

İ dont know anything about linux.
member
Activity: 532
Merit: 41
After trying everything you've been told in this thread if nothing works for you try to load up Linux OS through a usb flash drive and see if all the gpu will be recognized, you can download mining OS too like hiveOS, there is a possibility that all graphic cards will be seen
newbie
Activity: 21
Merit: 0
İt is win 10 64 bit.
İ did all of them only virtual memory 20 gb. i wiil it 60 GB. İ hope this work

And thank you for all of answers
member
Activity: 1201
Merit: 26
is it Win 10 64bit?
if yes then start bios, make all pcie settings gen 2.0 or even gen 1.0 enable 4g decode.
Make virtual memory 40-50-60gb.After that add cards 1 by 1. 1.2.3.4.5.6. if still problem not resolved test your riser 1 by 1.
newbie
Activity: 21
Merit: 0
they all work one by one.  bios updated.  but the problem is still
member
Activity: 462
Merit: 19
just bought GTX 1070 6 card after setup my PC see only 4 card.
Did anyone found my problem before?

GTX 1070 can see only 4 card? Please help.

board M/B ASUS ROG STRIX H270F GAMING
Graphic card manli  GTX 1070 8 GB x 6
PSU corsair 750 watt x 2


thank you.
Test the gpu one by one to make sure they are all working, if they work it's definitely from the motherboard, it's better to check for bios update through official Asus website and flash to the latest update, see if that works for you
newbie
Activity: 21
Merit: 0
I have the same problem.  No image appears when I plug in 5 gpu.

Gpu- rx580
Motherboard- h270f gaming

Please help
member
Activity: 118
Merit: 10
thank.
I will try
newbie
Activity: 10
Merit: 0
above 4g decoding in bios activated?
OS installed in uefi?
sr. member
Activity: 873
Merit: 268
Yep it only works with 4 cards (I am joking not sure about your issue)... sell me the other 2 cards gTX 1070 at costs please
member
Activity: 118
Merit: 10
just bought GTX 1070 6 card after setup my PC see only 4 card.
Did anyone found my problem before?

GTX 1070 can see only 4 card? Please help.

board M/B ASUS ROG STRIX H270F GAMING
Graphic card manli  GTX 1070 8 GB x 6
PSU corsair 750 watt x 2


thank you.
Jump to: