You have bad chips on one board that are not opening or they are not getting enough power.
Run each board individually to see which board is chain 7 and see if it runs by its self. If it runs fine then you have a weak power supply or the lines in the wall have to much resistance to handle all three miners. I have seen several people with 16 or 32 amp circuits but the power lines them selves are to small.
If the board does not run by its self try swapping the cable from the controller and see if it works, if it does then the controller is likely the issue. If it still does not work then ship that thing back to bitmain while you still have free shipping.
Topic: JUST RECEIVED S9, NEED HELP! APPRECIATE ANYONE THAT HELP ME OUT. (Read 269 times)
Sorry its the 0428 firmware that I use.
Antminer-S9-all-201704280713-autofreq-user-Update2UBI-NF.tar
Antminer-S9-all-201704280713-autofreq-user-Update2UBI-NF.tar
it is the Fri Nov 17 17:37:49 CST 2017, can you screenshot me which one on the website because they have many?
also
found this error which doesn't seem right.
(Moderator's note: This post was edited by frodocooper to add code tags.)
also
Code:
some chip cores are not opened FAILED!
Test Patten on chain[7]: FAILED!
do heat board 8xPatten for 2 times
do open core on Chain[7]
Test Patten on chain[7]: FAILED!
do heat board 8xPatten for 2 times
do open core on Chain[7]
found this error which doesn't seem right.
(Moderator's note: This post was edited by frodocooper to add code tags.)
Which version of firmware does your s9 have? I have seen the bmminer not found error on the november firmware. I roll my mahcines back to the 0427 firmware available on the bitmain site and it fixes most connectivity issues.
It just seems that overtime it hits 80 the miner lowers the fan speed(it doesn't completely turn off) then after a minute or so it increases the fan speed again.
Regarding the power supply, yes they are the vitamin apw3++ and i am mining in the uk, our mains give a 230v output.
I have no idea about coding but i thought these are interesting and could help you out
do not have any idea what that means.
and
and
and
If you can also read through the code it would be really helpful!
Thank you
(Moderator's note: This post was edited by frodocooper to add code tags.)
Regarding the power supply, yes they are the vitamin apw3++ and i am mining in the uk, our mains give a 230v output.
I have no idea about coding but i thought these are interesting and could help you out
Code:
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
do not have any idea what that means.
and
Code:
Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2"
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2"
and
Code:
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1377 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
bmminer not found= 1613 root 0:00 grep bmminer
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1377 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
bmminer not found= 1613 root 0:00 grep bmminer
and
Code:
read failed on Chain[7] Chip[62] middle Temp old value:75
Special fix Chain[7] Chip[62] middle Temp = 76
Done read temp on Chain[7]
set FAN speed according to: temp_highest=64 temp_top1[PWM_T]=64 temp_top1[TEMP_POS_LOCAL]=64 temp_change=0 fix_fan_steps=0
FAN PWM: 78
Special fix Chain[7] Chip[62] middle Temp = 76
Done read temp on Chain[7]
set FAN speed according to: temp_highest=64 temp_top1[PWM_T]=64 temp_top1[TEMP_POS_LOCAL]=64 temp_change=0 fix_fan_steps=0
FAN PWM: 78
If you can also read through the code it would be really helpful!
Thank you
(Moderator's note: This post was edited by frodocooper to add code tags.)
First things first you need to put that huge wall of text into a code tag.
Second, The s9 does not shut off at 80c. Its thermal cutoff is over 100c so if it is restarting at 80 thats not heat, its most likely a power supply.
Are you running the bitmain APW3++ PSU?
If so, are you running it on 110v?
Second, The s9 does not shut off at 80c. Its thermal cutoff is over 100c so if it is restarting at 80 thats not heat, its most likely a power supply.
Are you running the bitmain APW3++ PSU?
If so, are you running it on 110v?
Hi,
I received my t9+ from vitamin 2/3 weeks ago but when it came it didn't seem right, it would make a really loud noise then just over heat in about a minute and restart and it would just continue to do that without showing any data so i sent that to Bitmain.
Today i received my ant miner s9 from bitmain and i am experiencing a similar issue, however after hours of playing with it iv finally got it to mine however every 2/3 minutes the temp would hit 80 and it would restart. Anyone can help me out?
Kernel log:
----------------
Have tried a lot of things such as rebooting and resetting, haven't tried flashing firmware again, so if anyone can help me i would really appreciate it.
I received my t9+ from vitamin 2/3 weeks ago but when it came it didn't seem right, it would make a really loud noise then just over heat in about a minute and restart and it would just continue to do that without showing any data so i sent that to Bitmain.
Today i received my ant miner s9 from bitmain and i am experiencing a similar issue, however after hours of playing with it iv finally got it to mine however every 2/3 minutes the temp would hit 80 and it would restart. Anyone can help me out?
Kernel log:
Code:
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000313] ps7-ttc #0 at df804000, irq=43
[ 0.000619] Console: colour dummy device 80x30
[ 0.000650] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040211] pid_max: default: 32768 minimum: 301
[ 0.040429] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.040448] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.042580] CPU: Testing write buffer coherency: ok
[ 0.042916] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.042975] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[ 0.043203] L310 cache controller enabled
[ 0.043222] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.121038] CPU1: Booted secondary processor
[ 0.210231] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210364] Brought up 2 CPUs
[ 0.210383] SMP: Total of 2 processors activated.
[ 0.210391] CPU: All CPU(s) started in SVC mode.
[ 0.211084] devtmpfs: initialized
[ 0.213482] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214699] regulator-dummy: no parameters
[ 0.222376] NET: Registered protocol family 16
[ 0.224665] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.226967] cpuidle: using governor ladder
[ 0.226980] cpuidle: using governor menu
[ 0.234426] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.235953] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.235967] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.236081] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.257888] bio: create slab at 0
[ 0.259320] vgaarb: loaded
[ 0.260049] SCSI subsystem initialized
[ 0.261059] usbcore: registered new interface driver usbfs
[ 0.261243] usbcore: registered new interface driver hub
[ 0.261474] usbcore: registered new device driver usb
[ 0.262001] media: Linux media interface: v0.10
[ 0.262160] Linux video capture interface: v2.00
[ 0.262401] pps_core: LinuxPPS API ver. 1 registered
[ 0.262413] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 0.262537] PTP clock support registered
[ 0.262898] EDAC MC: Ver: 3.0.0
[ 0.263957] Advanced Linux Sound Architecture Driver Initialized.
[ 0.266824] DMA-API: preallocated 4096 debug entries
[ 0.266839] DMA-API: debugging enabled by kernel config
[ 0.266914] Switched to clocksource arm_global_timer
[ 0.287798] NET: Registered protocol family 2
[ 0.288458] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.288515] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.288600] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.288653] TCP: reno registered
[ 0.288670] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.288702] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.288937] NET: Registered protocol family 1
[ 0.289276] RPC: Registered named UNIX socket transport module.
[ 0.289288] RPC: Registered udp transport module.
[ 0.289297] RPC: Registered tcp transport module.
[ 0.289305] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.289318] PCI: CLS 0 bytes, default 64
[ 0.289752] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.291775] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.293857] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.294066] msgmni has been set to 967
[ 0.294850] io scheduler noop registered
[ 0.294863] io scheduler deadline registered
[ 0.294905] io scheduler cfq registered (default)
[ 0.302799] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.302820] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.425009] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 0.993281] console [ttyPS0] enabled
[ 0.997567] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.005179] [drm] Initialized drm 1.1.0 20060810
[ 1.022219] brd: module loaded
[ 1.031567] loop: module loaded
[ 1.040812] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.046558] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.054611] libphy: XEMACPS mii bus: probed
[ 1.059164] ------------- phy_id = 0x3625e62
[ 1.063906] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.072841] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.079526] ehci-pci: EHCI PCI platform driver
[ 1.086741] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.093585] usbcore: registered new interface driver usb-storage
[ 1.100528] mousedev: PS/2 mouse device common for all mice
[ 1.106633] i2c /dev entries driver
[ 1.113576] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.119114] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.124994] Xilinx Zynq CpuIdle Driver started
[ 1.129879] sdhci: Secure Digital Host Controller Interface driver
[ 1.135971] sdhci: Copyright(c) Pierre Ossman
[ 1.140339] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.147189] mmc0: no vqmmc regulator found
[ 1.151199] mmc0: no vmmc regulator found
[ 1.186934] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.195617] usbcore: registered new interface driver usbhid
[ 1.201130] usbhid: USB HID core driver
[ 1.205836] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.212135] nand: Micron MT29F2G08ABAEAWP
[ 1.216099] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.222040] Bad block table found at page 131008, version 0x01
[ 1.228269] Bad block table found at page 130944, version 0x01
[ 1.234319] 3 ofpart partitions found on MTD device pl353-nand
[ 1.240100] Creating 3 MTD partitions on "pl353-nand":
[ 1.245189] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.253237] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.260544] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.269501] TCP: cubic registered
[ 1.272737] NET: Registered protocol family 17
[ 1.277451] Registering SWP/SWPB emulation handler
[ 1.283313] regulator-dummy: disabling
[ 1.287669] UBI: attaching mtd1 to ubi0
[ 1.815325] UBI: scanning is finished
[ 1.827031] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.834089] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.840887] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.847568] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.854399] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.860411] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.867523] UBI: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1283732989
[ 1.876534] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.885767] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.885772] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.889706] ALSA device list:
[ 1.889710] No soundcards found.
[ 1.906126] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.935162] UBIFS: recovery needed
[ 2.080797] UBIFS: recovery completed
[ 2.084476] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.090425] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.099530] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.109419] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.114449] UBIFS: media format: w4/r0 (latest is w4/r0), UUID C72F8006-6DFF-46BA-BBE9-380960A89F92, small LPT model
[ 2.125747] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.132937] devtmpfs: mounted
[ 2.136043] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 2.972880] random: dd urandom read with 0 bits of entropy available
[ 3.366939]
[ 3.366939] bcm54xx_config_init
[ 3.976960]
[ 3.976960] bcm54xx_config_init
[ 7.977782] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 7.983892] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 22.621199] In axi fpga driver!
[ 22.624266] request_mem_region OK!
[ 22.627689] AXI fpga dev virtual address is 0xdf9fc000
[ 22.632765] *base_vir_addr = 0x8c510
[ 22.648296] In fpga mem driver!
[ 22.651367] request_mem_region OK!
[ 22.654928] fpga mem virtual address is 0xe2000000
[ 23.446961]
[ 23.446961] bcm54xx_config_init
[ 24.076933]
[ 24.076933] bcm54xx_config_init
[ 28.077938] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 28.084045] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 694.357481] random: nonblocking pool is initialized
This is XILINX board. Totalram: 507527168
Detect 512MB control board of XILINX
DETECT HW version=0008c510
miner ID : 81246dca18c0881c
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[26] has core num=1
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[50] has core num=1
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[4] has core num=2
Chain[7] ASIC[29] has core num=1
Chain[7] ASIC[39] has core num=1
Chain[7] ASIC[40] has core num=15
Chain[7] ASIC[41] has core num=15
Chain[7] ASIC[43] has core num=15
Chain[7] ASIC[51] has core num=6
Check chain[7] PIC fw version=0x03
get PIC voltage=6 on chain[5], value=940
get PIC voltage=91 on chain[6], value=890
get PIC voltage=125 on chain[7], value=870
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,-68,0,0,0,0,33,0
chain[7] temp chip I2C addr=0x98
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL
--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1377 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
bmminer not found= 1613 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Fri Nov 17 17:37:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 81246dca18c0881c
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[5] speed=4560
get fan[2] speed=6120
get fan[5] speed=4560
get fan[2] speed=6120
get fan[5] speed=4560
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has backup chain_voltage=910
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has backup chain_voltage=890
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has backup chain_voltage=870
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=57 value=910
Chain[J7] orignal chain_voltage_pic=91 value=890
Chain[J8] orignal chain_voltage_pic=125 value=870
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[26] has core num=1
Chain[J7] has core num in PIC
Chain[J7] ASIC[50] has core num=1
Chain[J8] has core num in PIC
Chain[J8] ASIC[4] has core num=2
Chain[J8] ASIC[29] has core num=1
Chain[J8] ASIC[39] has core num=1
Chain[J8] ASIC[40] has core num=15
Chain[J8] ASIC[41] has core num=15
Chain[J8] ASIC[43] has core num=15
Chain[J8] ASIC[51] has core num=6
miner total rate=13575GH/s fixed rate=13500GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=606
Asic[ 0]:606
Asic[ 1]:606 Asic[ 2]:606 Asic[ 3]:606 Asic[ 4]:606 Asic[ 5]:606 Asic[ 6]:606 Asic[ 7]:606 Asic[ 8]:606
Asic[ 9]:606 Asic[10]:606 Asic[11]:606 Asic[12]:606 Asic[13]:606 Asic[14]:606 Asic[15]:606 Asic[16]:606
Asic[17]:606 Asic[18]:606 Asic[19]:606 Asic[20]:606 Asic[21]:606 Asic[22]:606 Asic[23]:606 Asic[24]:606
Asic[25]:606 Asic[26]:606 Asic[27]:606 Asic[28]:606 Asic[29]:606 Asic[30]:606 Asic[31]:606 Asic[32]:606
Asic[33]:606 Asic[34]:606 Asic[35]:606 Asic[36]:606 Asic[37]:606 Asic[38]:606 Asic[39]:606 Asic[40]:606
Asic[41]:606 Asic[42]:606 Asic[43]:606 Asic[44]:606 Asic[45]:606 Asic[46]:606 Asic[47]:606 Asic[48]:606
Asic[49]:606 Asic[50]:606 Asic[51]:606 Asic[52]:606 Asic[53]:606 Asic[54]:606 Asic[55]:606 Asic[56]:606
Asic[57]:606 Asic[58]:606 Asic[59]:606 Asic[60]:606 Asic[61]:606 Asic[62]:606
Chain:5 max freq=606
Chain:5 min freq=606
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=631
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:6 max freq=631
Chain:6 min freq=631
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=-68
Chain:7 base freq=687
Asic[ 0]:687
Asic[ 1]:687 Asic[ 2]:687 Asic[ 3]:687 Asic[ 4]:687 Asic[ 5]:687 Asic[ 6]:687 Asic[ 7]:687 Asic[ 8]:687
Asic[ 9]:687 Asic[10]:687 Asic[11]:687 Asic[12]:687 Asic[13]:687 Asic[14]:687 Asic[15]:687 Asic[16]:687
Asic[17]:687 Asic[18]:687 Asic[19]:687 Asic[20]:687 Asic[21]:687 Asic[22]:687 Asic[23]:687 Asic[24]:687
Asic[25]:687 Asic[26]:687 Asic[27]:687 Asic[28]:687 Asic[29]:687 Asic[30]:687 Asic[31]:687 Asic[32]:687
Asic[33]:687 Asic[34]:687 Asic[35]:687 Asic[36]:687 Asic[37]:687 Asic[38]:687 Asic[39]:687 Asic[40]:687
Asic[41]:687 Asic[42]:687 Asic[43]:687 Asic[44]:687 Asic[45]:687 Asic[46]:687 Asic[47]:687 Asic[48]:687
Asic[49]:687 Asic[50]:687 Asic[51]:687 Asic[52]:687 Asic[53]:687 Asic[54]:687 Asic[55]:687 Asic[56]:687
Asic[57]:687 Asic[58]:687 Asic[59]:687 Asic[60]:687 Asic[61]:687 Asic[62]:687
Chain:7 max freq=687
Chain:7 min freq=687
Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=606
Asic[ 0]:606
Asic[ 1]:606 Asic[ 2]:606 Asic[ 3]:606 Asic[ 4]:606 Asic[ 5]:606 Asic[ 6]:606 Asic[ 7]:606 Asic[ 8]:606
Asic[ 9]:606 Asic[10]:606 Asic[11]:606 Asic[12]:606 Asic[13]:606 Asic[14]:606 Asic[15]:606 Asic[16]:606
Asic[17]:606 Asic[18]:606 Asic[19]:606 Asic[20]:606 Asic[21]:606 Asic[22]:606 Asic[23]:606 Asic[24]:606
Asic[25]:606 Asic[26]:606 Asic[27]:606 Asic[28]:606 Asic[29]:606 Asic[30]:606 Asic[31]:606 Asic[32]:606
Asic[33]:606 Asic[34]:606 Asic[35]:606 Asic[36]:606 Asic[37]:606 Asic[38]:606 Asic[39]:606 Asic[40]:606
Asic[41]:606 Asic[42]:606 Asic[43]:606 Asic[44]:606 Asic[45]:606 Asic[46]:606 Asic[47]:606 Asic[48]:606
Asic[49]:606 Asic[50]:606 Asic[51]:606 Asic[52]:606 Asic[53]:606 Asic[54]:606 Asic[55]:606 Asic[56]:606
Asic[57]:606 Asic[58]:606 Asic[59]:606 Asic[60]:606 Asic[61]:606 Asic[62]:606
Chain:5 max freq=606
Chain:5 min freq=606
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=631
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:6 max freq=631
Chain:6 min freq=631
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=-68
Chain:7 base freq=687
Asic[ 0]:687
Asic[ 1]:687 Asic[ 2]:687 Asic[ 3]:687 Asic[ 4]:687 Asic[ 5]:687 Asic[ 6]:687 Asic[ 7]:687 Asic[ 8]:687
Asic[ 9]:687 Asic[10]:687 Asic[11]:687 Asic[12]:687 Asic[13]:687 Asic[14]:687 Asic[15]:687 Asic[16]:687
Asic[17]:687 Asic[18]:687 Asic[19]:687 Asic[20]:687 Asic[21]:687 Asic[22]:687 Asic[23]:687 Asic[24]:687
Asic[25]:687 Asic[26]:687 Asic[27]:687 Asic[28]:687 Asic[29]:687 Asic[30]:687 Asic[31]:687 Asic[32]:687
Asic[33]:687 Asic[34]:687 Asic[35]:687 Asic[36]:687 Asic[37]:687 Asic[38]:687 Asic[39]:687 Detect a bad chip=40 on chain[7], fixed to 400M
Asic[40]:687
Detect a bad chip=41 on chain[7], fixed to 400M
Asic[41]:687 Asic[42]:687 Detect a bad chip=43 on chain[7], fixed to 400M
Asic[43]:687 Asic[44]:687 Asic[45]:687 Asic[46]:687 Asic[47]:687 Asic[48]:687
Asic[49]:687 Asic[50]:687 Asic[51]:687 Asic[52]:687 Asic[53]:687 Asic[54]:687 Asic[55]:687 Asic[56]:687
Asic[57]:687 Asic[58]:687 Asic[59]:687 Asic[60]:687 Asic[61]:687 Asic[62]:687
Chain:7 max freq=687
Chain:7 min freq=687
max freq = 687
set baud=1
Chain[J6] PIC temp offset=62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=1a
Warning: Chain[5] chip[244] local:40 remote:-127 offset:-58, will fixed offset=27
New offset Chain[5] chip[244] local:40 remote:-127 offset:27
Chain[J6] chip[244] get middle temp offset=27 typeID=1a
Chain[J7] PIC temp offset=62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=1a
Warning: Chain[6] chip[244] local:37 remote:-77 offset:-111, will fixed offset=27
New offset Chain[6] chip[244] local:37 remote:-77 offset:27
Chain[J7] chip[244] get middle temp offset=27 typeID=1a
Chain[J8] PIC temp offset=62,-68,0,0,0,0,33,0
chain[7] temp chip I2C addr=0x98
Chain[J8] chip[244] use PIC middle temp offset=-68 typeID=1a
Warning: Chain[7] chip[244] local:38 remote:-83 offset:-104, will fixed offset=27
New offset Chain[7] chip[244] local:38 remote:-83 offset:27
Chain[J8] chip[244] get middle temp offset=27 typeID=1a
single board rate=4351 voltage limit=910 on chain[5]
get PIC voltage=910 on chain[5], check: must be < 910
retryFlag=1 will set the voltage limited on chain[5], change voltage=910
now set pic voltage=57 on chain[5]
single board rate=4531 voltage limit=890 on chain[6]
get PIC voltage=890 on chain[6], check: must be < 890
retryFlag=1 will set the voltage limited on chain[6], change voltage=890
now set pic voltage=91 on chain[6]
single board rate=4692 voltage limit=870 on chain[7]
get PIC voltage=870 on chain[7], check: must be < 870
retryFlag=1 will set the voltage limited on chain[7], change voltage=870
now set pic voltage=125 on chain[7]
Chain[J6] set working voltage=910 [57]
Chain[J7] set working voltage=890 [91]
Chain[J8] set working voltage=870 [125]
do heat board 8xPatten for 1 times
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=606 freq[01]=606 freq[02]=606 freq[03]=606 freq[04]=606 freq[05]=606 freq[06]=606 freq[07]=606
freq[08]=606 freq[09]=606 freq[10]=606 freq[11]=606 freq[12]=606 freq[13]=606 freq[14]=606 freq[15]=606
freq[16]=606 freq[17]=606 freq[18]=606 freq[19]=606 freq[20]=606 freq[21]=606 freq[22]=606 freq[23]=606
freq[24]=606 freq[25]=606 freq[26]=606 freq[27]=606 freq[28]=606 freq[29]=606 freq[30]=606 freq[31]=606
freq[32]=606 freq[33]=606 freq[34]=606 freq[35]=606 freq[36]=606 freq[37]=606 freq[38]=606 freq[39]=606
freq[40]=606 freq[41]=606 freq[42]=606 freq[43]=606 freq[44]=606 freq[45]=606 freq[46]=606 freq[47]=606
freq[48]=606 freq[49]=606 freq[50]=606 freq[51]=606 freq[52]=606 freq[53]=606 freq[54]=606 freq[55]=606
freq[56]=606 freq[57]=606 freq[58]=606 freq[59]=606 freq[60]=606 freq[61]=606 freq[62]=606
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:24885
last_nonce_num:17275
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=631 freq[01]=631 freq[02]=631 freq[03]=631 freq[04]=631 freq[05]=631 freq[06]=631 freq[07]=631
freq[08]=631 freq[09]=631 freq[10]=631 freq[11]=631 freq[12]=631 freq[13]=631 freq[14]=631 freq[15]=631
freq[16]=631 freq[17]=631 freq[18]=631 freq[19]=631 freq[20]=631 freq[21]=631 freq[22]=631 freq[23]=631
freq[24]=631 freq[25]=631 freq[26]=631 freq[27]=631 freq[28]=631 freq[29]=631 freq[30]=631 freq[31]=631
freq[32]=631 freq[33]=631 freq[34]=631 freq[35]=631 freq[36]=631 freq[37]=631 freq[38]=631 freq[39]=631
freq[40]=631 freq[41]=631 freq[42]=631 freq[43]=631 freq[44]=631 freq[45]=631 freq[46]=631 freq[47]=631
freq[48]=631 freq[49]=631 freq[50]=631 freq[51]=631 freq[52]=631 freq[53]=631 freq[54]=631 freq[55]=631
freq[56]=631 freq[57]=631 freq[58]=631 freq[59]=631 freq[60]=631 freq[61]=631 freq[62]=631
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:25853
last_nonce_num:55783
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=896 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=911
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=905 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=741 asic[27]=910 asic[28]=912 asic[29]=744 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=909 asic[39]=912
asic[40]=906 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=904
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=790 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[04]=896
core[001]=7 core[032]=7 core[033]=7 core[050]=7 core[051]=7 core[056]=7 core[057]=7 core[058]=6 core[066]=7 core[069]=7 core[073]=7 core[078]=7 core[088]=7 core[094]=7 core[104]=7
asic[15]=911
core[110]=7
asic[19]=905
core[001]=6 core[003]=7 core[017]=6 core[022]=7 core[058]=7
asic[26]=741
core[001]=5 core[034]=0 core[035]=1 core[036]=0 core[037]=1 core[038]=1 core[039]=1 core[040]=1 core[041]=1 core[042]=1 core[043]=1 core[044]=1 core[045]=1 core[046]=1 core[047]=1 core[048]=1 core[049]=0 core[050]=1 core[051]=1 core[052]=1 core[053]=1 core[054]=1 core[055]=1 core[056]=0 core[062]=7 core[086]=7 core[111]=7
asic[27]=910
core[108]=6
asic[29]=744
core[068]=3 core[069]=7 core[070]=7 core[071]=7 core[072]=7 core[073]=7 core[074]=7 core[075]=7 core[076]=7 core[077]=7 core[078]=7 core[079]=7 core[080]=7 core[081]=7 core[082]=7 core[083]=7 core[084]=7 core[085]=7 core[086]=7 core[087]=7 core[088]=7 core[089]=7 core[092]=7 core[093]=7 core[094]=7 core[095]=7 core[096]=0 core[097]=0 core[098]=0 core[099]=0 core[100]=0 core[101]=1 core[102]=0 core[103]=1 core[104]=1 core[105]=1 core[106]=1 core[107]=1 core[108]=0 core[109]=0 core[110]=0 core[111]=0 core[112]=0 core[113]=0
asic[38]=909
core[060]=5
asic[40]=906
core[037]=2
asic[47]=904
core[060]=6 core[106]=5 core[107]=7 core[109]=7 core[112]=7
asic[51]=790
core[016]=7 core[018]=5 core[019]=6 core[021]=7 core[022]=7 core[026]=6 core[027]=7 core[028]=7 core[030]=7 core[031]=7 core[032]=7 core[033]=7 core[034]=7 core[035]=7 core[037]=7 core[038]=7 core[039]=7 core[040]=6 core[041]=7 core[042]=6 core[043]=7 core[044]=7 core[045]=7 core[046]=6 core[048]=7 core[049]=7 core[050]=7 core[051]=7 core[052]=7 core[053]=7 core[055]=7 core[058]=6 core[060]=6 core[062]=4 core[064]=7 core[068]=7 core[072]=4 core[074]=7 core[075]=7 core[077]=7 core[078]=7 core[079]=6 core[080]=6 core[081]=7 core[082]=6 core[083]=6 core[084]=3 core[085]=6 core[086]=7 core[087]=6 core[088]=6 core[089]=6 core[090]=6 core[091]=6 core[092]=6 core[093]=6 core[094]=7 core[095]=6 core[096]=6 core[097]=6 core[098]=6 core[099]=7 core[100]=6 core[101]=6 core[102]=6 core[103]=6 core[104]=6 core[105]=7 core[106]=6 core[107]=6 core[108]=7 core[109]=7 core[110]=7 core[111]=6 core[112]=4 core[113]=7
freq[00]=687 freq[01]=687 freq[02]=687 freq[03]=687 freq[04]=687 freq[05]=687 freq[06]=687 freq[07]=687
freq[08]=687 freq[09]=687 freq[10]=687 freq[11]=687 freq[12]=687 freq[13]=687 freq[14]=687 freq[15]=687
freq[16]=687 freq[17]=687 freq[18]=687 freq[19]=687 freq[20]=687 freq[21]=687 freq[22]=687 freq[23]=687
freq[24]=687 freq[25]=687 freq[26]=687 freq[27]=687 freq[28]=687 freq[29]=687 freq[30]=687 freq[31]=687
freq[32]=687 freq[33]=687 freq[34]=687 freq[35]=687 freq[36]=687 freq[37]=687 freq[38]=687 freq[39]=687
freq[40]=687 freq[41]=687 freq[42]=687 freq[43]=687 freq[44]=687 freq[45]=687 freq[46]=687 freq[47]=687
freq[48]=687 freq[49]=687 freq[50]=687 freq[51]=687 freq[52]=687 freq[53]=687 freq[54]=687 freq[55]=687
freq[56]=687 freq[57]=687 freq[58]=687 freq[59]=687 freq[60]=687 freq[61]=687 freq[62]=687
total valid nonce number:56952
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:27313
last_nonce_num:15040
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: OK!
chain[6]: All chip cores are opened OK!
Test Patten on chain[6]: OK!
chain[7]: some chip cores are not opened FAILED!
Test Patten on chain[7]: FAILED!
do heat board 8xPatten for 2 times
do open core on Chain[7]...
Done open core on Chain[7]!
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=606 freq[01]=606 freq[02]=606 freq[03]=606 freq[04]=606 freq[05]=606 freq[06]=606 freq[07]=606
freq[08]=606 freq[09]=606 freq[10]=606 freq[11]=606 freq[12]=606 freq[13]=606 freq[14]=606 freq[15]=606
freq[16]=606 freq[17]=606 freq[18]=606 freq[19]=606 freq[20]=606 freq[21]=606 freq[22]=606 freq[23]=606
freq[24]=606 freq[25]=606 freq[26]=606 freq[27]=606 freq[28]=606 freq[29]=606 freq[30]=606 freq[31]=606
freq[32]=606 freq[33]=606 freq[34]=606 freq[35]=606 freq[36]=606 freq[37]=606 freq[38]=606 freq[39]=606
freq[40]=606 freq[41]=606 freq[42]=606 freq[43]=606 freq[44]=606 freq[45]=606 freq[46]=606 freq[47]=606
freq[48]=606 freq[49]=606 freq[50]=606 freq[51]=606 freq[52]=606 freq[53]=606 freq[54]=606 freq[55]=606
freq[56]=606 freq[57]=606 freq[58]=606 freq[59]=606 freq[60]=606 freq[61]=606 freq[62]=606
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:24882
last_nonce_num:27918
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=631 freq[01]=631 freq[02]=631 freq[03]=631 freq[04]=631 freq[05]=631 freq[06]=631 freq[07]=631
freq[08]=631 freq[09]=631 freq[10]=631 freq[11]=631 freq[12]=631 freq[13]=631 freq[14]=631 freq[15]=631
freq[16]=631 freq[17]=631 freq[18]=631 freq[19]=631 freq[20]=631 freq[21]=631 freq[22]=631 freq[23]=631
freq[24]=631 freq[25]=631 freq[26]=631 freq[27]=631 freq[28]=631 freq[29]=631 freq[30]=631 freq[31]=631
freq[32]=631 freq[33]=631 freq[34]=631 freq[35]=631 freq[36]=631 freq[37]=631 freq[38]=631 freq[39]=631
freq[40]=631 freq[41]=631 freq[42]=631 freq[43]=631 freq[44]=631 freq[45]=631 freq[46]=631 freq[47]=631
freq[48]=631 freq[49]=631 freq[50]=631 freq[51]=631 freq[52]=631 freq[53]=631 freq[54]=631 freq[55]=631
freq[56]=631 freq[57]=631 freq[58]=631 freq[59]=631 freq[60]=631 freq[61]=631 freq[62]=631
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:25858
last_nonce_num:27921
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=903 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=728 asic[27]=912 asic[28]=912 asic[29]=768 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=906 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=895 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[04]=903
core[000]=7 core[002]=7 core[024]=7 core[032]=7 core[033]=7 core[047]=7 core[056]=7 core[069]=7 core[071]=7
asic[26]=728
core[034]=0 core[035]=0 core[036]=0 core[037]=0 core[038]=0 core[039]=0 core[040]=0 core[041]=0 core[042]=0 core[043]=0 core[044]=0 core[045]=0 core[046]=0 core[047]=0 core[048]=0 core[049]=0 core[050]=0 core[051]=0 core[052]=0 core[053]=0 core[054]=0 core[055]=0 core[056]=0
asic[29]=768
core[096]=0 core[097]=0 core[098]=0 core[099]=0 core[100]=0 core[101]=0 core[102]=0 core[103]=0 core[104]=0 core[105]=0 core[106]=0 core[107]=0 core[108]=0 core[109]=0 core[110]=0 core[111]=0 core[112]=0 core[113]=0
asic[40]=906
core[037]=2
asic[51]=895
core[062]=5 core[084]=1 core[112]=1
freq[00]=687 freq[01]=687 freq[02]=687 freq[03]=687 freq[04]=687 freq[05]=687 freq[06]=687 freq[07]=687
freq[08]=687 freq[09]=687 freq[10]=687 freq[11]=687 freq[12]=687 freq[13]=687 freq[14]=687 freq[15]=687
freq[16]=687 freq[17]=687 freq[18]=687 freq[19]=687 freq[20]=687 freq[21]=687 freq[22]=687 freq[23]=687
freq[24]=687 freq[25]=687 freq[26]=687 freq[27]=687 freq[28]=687 freq[29]=687 freq[30]=687 freq[31]=687
freq[32]=687 freq[33]=687 freq[34]=687 freq[35]=687 freq[36]=687 freq[37]=687 freq[38]=687 freq[39]=687
freq[40]=687 freq[41]=687 freq[42]=687 freq[43]=687 freq[44]=687 freq[45]=687 freq[46]=687 freq[47]=687
freq[48]=687 freq[49]=687 freq[50]=687 freq[51]=687 freq[52]=687 freq[53]=687 freq[54]=687 freq[55]=687
freq[56]=687 freq[57]=687 freq[58]=687 freq[59]=687 freq[60]=687 freq[61]=687 freq[62]=687
total valid nonce number:57096
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:54017
last_nonce_num:45787
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: OK!
chain[6]: All chip cores are opened OK!
Test Patten on chain[6]: OK!
chain[7]: some chip cores are not opened FAILED!
Test Patten on chain[7]: FAILED!
setStartTimePoint total_tv_start_sys=393 total_tv_end_sys=394
restartNum = 2 , auto-reinit enabled...
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
do read_temp_func once...
do check_asic_reg 0x08
get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=70.1110 Asic[02]=61.7400 Asic[03]=69.6590 Asic[04]=69.3900 Asic[05]=72.4440 Asic[06]=67.4770 Asic[07]=67.9980 Asic[08]=65.8670
Asic[09]=66.6050 Asic[10]=71.4200 Asic[11]=68.1490 Asic[12]=71.3700 Asic[13]=70.0610 Asic[14]=66.5040 Asic[15]=72.2930 Asic[16]=71.6550
Asic[17]=76.2690 Asic[18]=68.2320 Asic[19]=71.2690 Asic[20]=63.2160 Asic[21]=70.1950 Asic[22]=68.3500 Asic[23]=72.2590 Asic[24]=71.5040
Asic[25]=71.4540 Asic[26]=66.4370 Asic[27]=61.7230 Asic[28]=68.6020 Asic[29]=68.2660 Asic[30]=70.8660 Asic[31]=68.6520 Asic[32]=64.4240
Asic[33]=67.9140 Asic[34]=71.1010 Asic[35]=68.1990 Asic[36]=66.4880 Asic[37]=67.4940 Asic[38]=69.4240 Asic[39]=70.3130 Asic[40]=69.9270
Asic[41]=68.3500 Asic[42]=70.5140 Asic[43]=64.6760 Asic[44]=70.6150 Asic[45]=63.3670 Asic[46]=68.6020 Asic[47]=65.4140 Asic[48]=67.2260
Asic[49]=67.9140 Asic[50]=71.1010 Asic[51]=70.3630 Asic[52]=68.8530 Asic[53]=69.6420 Asic[54]=72.9640 Asic[55]=68.4510 Asic[56]=69.9600
Asic[57]=68.1990 Asic[58]=65.3300 Asic[59]=66.3030 Asic[60]=71.2020 Asic[61]=62.4440 Asic[62]=65.4470 Asic[63]=64.8940
get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=72.3930 Asic[02]=70.5140 Asic[03]=77.0240 Asic[04]=73.8860 Asic[05]=72.7620 Asic[06]=69.2060 Asic[07]=74.6750 Asic[08]=74.5070
Asic[09]=70.2620 Asic[10]=71.8730 Asic[11]=67.6620 Asic[12]=77.1080 Asic[13]=73.8860 Asic[14]=68.1650 Asic[15]=71.7560 Asic[16]=68.4840
Asic[17]=70.0950 Asic[18]=68.8530 Asic[19]=67.9140 Asic[20]=71.3530 Asic[21]=70.1450 Asic[22]=69.5410 Asic[23]=70.7660 Asic[24]=66.5550
Asic[25]=70.3630 Asic[26]=65.2130 Asic[27]=70.2620 Asic[28]=73.9030 Asic[29]=72.6280 Asic[30]=75.2620 Asic[31]=74.3390 Asic[32]=67.1420
Asic[33]=74.5410 Asic[34]=71.9910 Asic[35]=77.6610 Asic[36]=70.5310 Asic[37]=70.6480 Asic[38]=67.9810 Asic[39]=72.6450 Asic[40]=64.3740
Asic[41]=75.4130 Asic[42]=71.5540 Asic[43]=70.7830 Asic[44]=77.7120 Asic[45]=67.8130 Asic[46]=64.6420 Asic[47]=69.7090 Asic[48]=78.1480
Asic[49]=68.4170 Asic[50]=69.0380 Asic[51]=66.7060 Asic[52]=72.3760 Asic[53]=72.1420 Asic[54]=76.7380 Asic[55]=73.1310 Asic[56]=71.9230
Asic[57]=65.5980 Asic[58]=70.3630 Asic[59]=79.3890 Asic[60]=76.7550 Asic[61]=70.0280 Asic[62]=68.0980 Asic[63]=65.0110
get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=84.5060 Asic[02]=79.6240 Asic[03]=72.4770 Asic[04]=74.6410 Asic[05]=80.2620 Asic[06]=80.6140 Asic[07]=76.1180 Asic[08]=81.0840
Asic[09]=76.1510 Asic[10]=80.3290 Asic[11]=78.5670 Asic[12]=78.2320 Asic[13]=79.9930 Asic[14]=78.0810 Asic[15]=79.4400 Asic[16]=80.2780
Asic[17]=78.6340 Asic[18]=77.5940 Asic[19]=81.8720 Asic[20]=74.9270 Asic[21]=83.2980 Asic[22]=81.3020 Asic[23]=79.3050 Asic[24]=73.8860
Asic[25]=78.6340 Asic[26]=79.4060 Asic[27]=63.4010 Asic[28]=72.4100 Asic[29]=78.9200 Asic[30]=64.9780 Asic[31]=81.4860 Asic[32]=73.8700
Asic[33]=74.5740 Asic[34]=82.4260 Asic[35]=71.6720 Asic[36]=77.3930 Asic[37]=77.3260 Asic[38]=73.5510 Asic[39]=82.9130 Asic[40]=77.4430
Asic[41]=44.1910 Asic[42]=50.3310 Asic[43]=80.2280 Asic[44]=45.7010 Asic[45]=78.6010 Asic[46]=74.7590 Asic[47]=85.4290 Asic[48]=77.5610
Asic[49]=78.4330 Asic[50]=80.0440 Asic[51]=75.5310 Asic[52]=68.8530 Asic[53]=79.8930 Asic[54]=75.2450 Asic[55]=76.8060 Asic[56]=77.0740
Asic[57]=79.1380 Asic[58]=81.3350 Asic[59]=73.7020 Asic[60]=83.0470 Asic[61]=77.5100 Asic[62]=79.4230 Asic[63]=74.2550
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=1a middle offset=27
Chain[5] Chip[62] local Temp=64
read failed on Chain[5] Chip[62] middle Temp old value:79
Special fix Chain[5] Chip[62] middle Temp = 79
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=1a middle offset=27
Chain[6] Chip[62] local Temp=61
read failed on Chain[6] Chip[62] middle Temp old value:76
Special fix Chain[6] Chip[62] middle Temp = 76
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=1a middle offset=27
Chain[7] Chip[62] local Temp=61
read failed on Chain[7] Chip[62] middle Temp old value:75
Special fix Chain[7] Chip[62] middle Temp = 76
Done read temp on Chain[7]
set FAN speed according to: temp_highest=64 temp_top1[PWM_T]=64 temp_top1[TEMP_POS_LOCAL]=64 temp_change=0 fix_fan_steps=0
FAN PWM: 78
read_temp_func Done!
CRC error counter=0
[ 0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000313] ps7-ttc #0 at df804000, irq=43
[ 0.000619] Console: colour dummy device 80x30
[ 0.000650] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040211] pid_max: default: 32768 minimum: 301
[ 0.040429] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.040448] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.042580] CPU: Testing write buffer coherency: ok
[ 0.042916] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.042975] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[ 0.043203] L310 cache controller enabled
[ 0.043222] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.121038] CPU1: Booted secondary processor
[ 0.210231] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210364] Brought up 2 CPUs
[ 0.210383] SMP: Total of 2 processors activated.
[ 0.210391] CPU: All CPU(s) started in SVC mode.
[ 0.211084] devtmpfs: initialized
[ 0.213482] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214699] regulator-dummy: no parameters
[ 0.222376] NET: Registered protocol family 16
[ 0.224665] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.226967] cpuidle: using governor ladder
[ 0.226980] cpuidle: using governor menu
[ 0.234426] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.235953] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.235967] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.236081] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.257888] bio: create slab
[ 0.259320] vgaarb: loaded
[ 0.260049] SCSI subsystem initialized
[ 0.261059] usbcore: registered new interface driver usbfs
[ 0.261243] usbcore: registered new interface driver hub
[ 0.261474] usbcore: registered new device driver usb
[ 0.262001] media: Linux media interface: v0.10
[ 0.262160] Linux video capture interface: v2.00
[ 0.262401] pps_core: LinuxPPS API ver. 1 registered
[ 0.262413] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 0.262537] PTP clock support registered
[ 0.262898] EDAC MC: Ver: 3.0.0
[ 0.263957] Advanced Linux Sound Architecture Driver Initialized.
[ 0.266824] DMA-API: preallocated 4096 debug entries
[ 0.266839] DMA-API: debugging enabled by kernel config
[ 0.266914] Switched to clocksource arm_global_timer
[ 0.287798] NET: Registered protocol family 2
[ 0.288458] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.288515] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.288600] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.288653] TCP: reno registered
[ 0.288670] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.288702] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.288937] NET: Registered protocol family 1
[ 0.289276] RPC: Registered named UNIX socket transport module.
[ 0.289288] RPC: Registered udp transport module.
[ 0.289297] RPC: Registered tcp transport module.
[ 0.289305] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.289318] PCI: CLS 0 bytes, default 64
[ 0.289752] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.291775] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.293857] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.294066] msgmni has been set to 967
[ 0.294850] io scheduler noop registered
[ 0.294863] io scheduler deadline registered
[ 0.294905] io scheduler cfq registered (default)
[ 0.302799] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.302820] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.425009] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 0.993281] console [ttyPS0] enabled
[ 0.997567] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.005179] [drm] Initialized drm 1.1.0 20060810
[ 1.022219] brd: module loaded
[ 1.031567] loop: module loaded
[ 1.040812] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.046558] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.054611] libphy: XEMACPS mii bus: probed
[ 1.059164] ------------- phy_id = 0x3625e62
[ 1.063906] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.072841] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.079526] ehci-pci: EHCI PCI platform driver
[ 1.086741] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.093585] usbcore: registered new interface driver usb-storage
[ 1.100528] mousedev: PS/2 mouse device common for all mice
[ 1.106633] i2c /dev entries driver
[ 1.113576] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.119114] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.124994] Xilinx Zynq CpuIdle Driver started
[ 1.129879] sdhci: Secure Digital Host Controller Interface driver
[ 1.135971] sdhci: Copyright(c) Pierre Ossman
[ 1.140339] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.147189] mmc0: no vqmmc regulator found
[ 1.151199] mmc0: no vmmc regulator found
[ 1.186934] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.195617] usbcore: registered new interface driver usbhid
[ 1.201130] usbhid: USB HID core driver
[ 1.205836] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.212135] nand: Micron MT29F2G08ABAEAWP
[ 1.216099] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.222040] Bad block table found at page 131008, version 0x01
[ 1.228269] Bad block table found at page 130944, version 0x01
[ 1.234319] 3 ofpart partitions found on MTD device pl353-nand
[ 1.240100] Creating 3 MTD partitions on "pl353-nand":
[ 1.245189] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.253237] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.260544] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.269501] TCP: cubic registered
[ 1.272737] NET: Registered protocol family 17
[ 1.277451] Registering SWP/SWPB emulation handler
[ 1.283313] regulator-dummy: disabling
[ 1.287669] UBI: attaching mtd1 to ubi0
[ 1.815325] UBI: scanning is finished
[ 1.827031] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.834089] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.840887] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.847568] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.854399] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.860411] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.867523] UBI: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1283732989
[ 1.876534] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.885767] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.885772] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.889706] ALSA device list:
[ 1.889710] No soundcards found.
[ 1.906126] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.935162] UBIFS: recovery needed
[ 2.080797] UBIFS: recovery completed
[ 2.084476] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.090425] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.099530] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.109419] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.114449] UBIFS: media format: w4/r0 (latest is w4/r0), UUID C72F8006-6DFF-46BA-BBE9-380960A89F92, small LPT model
[ 2.125747] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.132937] devtmpfs: mounted
[ 2.136043] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 2.972880] random: dd urandom read with 0 bits of entropy available
[ 3.366939]
[ 3.366939] bcm54xx_config_init
[ 3.976960]
[ 3.976960] bcm54xx_config_init
[ 7.977782] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 7.983892] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 22.621199] In axi fpga driver!
[ 22.624266] request_mem_region OK!
[ 22.627689] AXI fpga dev virtual address is 0xdf9fc000
[ 22.632765] *base_vir_addr = 0x8c510
[ 22.648296] In fpga mem driver!
[ 22.651367] request_mem_region OK!
[ 22.654928] fpga mem virtual address is 0xe2000000
[ 23.446961]
[ 23.446961] bcm54xx_config_init
[ 24.076933]
[ 24.076933] bcm54xx_config_init
[ 28.077938] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 28.084045] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 694.357481] random: nonblocking pool is initialized
This is XILINX board. Totalram: 507527168
Detect 512MB control board of XILINX
DETECT HW version=0008c510
miner ID : 81246dca18c0881c
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[26] has core num=1
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[50] has core num=1
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[4] has core num=2
Chain[7] ASIC[29] has core num=1
Chain[7] ASIC[39] has core num=1
Chain[7] ASIC[40] has core num=15
Chain[7] ASIC[41] has core num=15
Chain[7] ASIC[43] has core num=15
Chain[7] ASIC[51] has core num=6
Check chain[7] PIC fw version=0x03
get PIC voltage=6 on chain[5], value=940
get PIC voltage=91 on chain[6], value=890
get PIC voltage=125 on chain[7], value=870
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,-68,0,0,0,0,33,0
chain[7] temp chip I2C addr=0x98
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL
--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1377 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
bmminer not found= 1613 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Fri Nov 17 17:37:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 81246dca18c0881c
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[5] speed=4560
get fan[2] speed=6120
get fan[5] speed=4560
get fan[2] speed=6120
get fan[5] speed=4560
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has backup chain_voltage=910
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has backup chain_voltage=890
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has backup chain_voltage=870
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=57 value=910
Chain[J7] orignal chain_voltage_pic=91 value=890
Chain[J8] orignal chain_voltage_pic=125 value=870
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[26] has core num=1
Chain[J7] has core num in PIC
Chain[J7] ASIC[50] has core num=1
Chain[J8] has core num in PIC
Chain[J8] ASIC[4] has core num=2
Chain[J8] ASIC[29] has core num=1
Chain[J8] ASIC[39] has core num=1
Chain[J8] ASIC[40] has core num=15
Chain[J8] ASIC[41] has core num=15
Chain[J8] ASIC[43] has core num=15
Chain[J8] ASIC[51] has core num=6
miner total rate=13575GH/s fixed rate=13500GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=606
Asic[ 0]:606
Asic[ 1]:606 Asic[ 2]:606 Asic[ 3]:606 Asic[ 4]:606 Asic[ 5]:606 Asic[ 6]:606 Asic[ 7]:606 Asic[ 8]:606
Asic[ 9]:606 Asic[10]:606 Asic[11]:606 Asic[12]:606 Asic[13]:606 Asic[14]:606 Asic[15]:606 Asic[16]:606
Asic[17]:606 Asic[18]:606 Asic[19]:606 Asic[20]:606 Asic[21]:606 Asic[22]:606 Asic[23]:606 Asic[24]:606
Asic[25]:606 Asic[26]:606 Asic[27]:606 Asic[28]:606 Asic[29]:606 Asic[30]:606 Asic[31]:606 Asic[32]:606
Asic[33]:606 Asic[34]:606 Asic[35]:606 Asic[36]:606 Asic[37]:606 Asic[38]:606 Asic[39]:606 Asic[40]:606
Asic[41]:606 Asic[42]:606 Asic[43]:606 Asic[44]:606 Asic[45]:606 Asic[46]:606 Asic[47]:606 Asic[48]:606
Asic[49]:606 Asic[50]:606 Asic[51]:606 Asic[52]:606 Asic[53]:606 Asic[54]:606 Asic[55]:606 Asic[56]:606
Asic[57]:606 Asic[58]:606 Asic[59]:606 Asic[60]:606 Asic[61]:606 Asic[62]:606
Chain:5 max freq=606
Chain:5 min freq=606
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=631
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:6 max freq=631
Chain:6 min freq=631
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=-68
Chain:7 base freq=687
Asic[ 0]:687
Asic[ 1]:687 Asic[ 2]:687 Asic[ 3]:687 Asic[ 4]:687 Asic[ 5]:687 Asic[ 6]:687 Asic[ 7]:687 Asic[ 8]:687
Asic[ 9]:687 Asic[10]:687 Asic[11]:687 Asic[12]:687 Asic[13]:687 Asic[14]:687 Asic[15]:687 Asic[16]:687
Asic[17]:687 Asic[18]:687 Asic[19]:687 Asic[20]:687 Asic[21]:687 Asic[22]:687 Asic[23]:687 Asic[24]:687
Asic[25]:687 Asic[26]:687 Asic[27]:687 Asic[28]:687 Asic[29]:687 Asic[30]:687 Asic[31]:687 Asic[32]:687
Asic[33]:687 Asic[34]:687 Asic[35]:687 Asic[36]:687 Asic[37]:687 Asic[38]:687 Asic[39]:687 Asic[40]:687
Asic[41]:687 Asic[42]:687 Asic[43]:687 Asic[44]:687 Asic[45]:687 Asic[46]:687 Asic[47]:687 Asic[48]:687
Asic[49]:687 Asic[50]:687 Asic[51]:687 Asic[52]:687 Asic[53]:687 Asic[54]:687 Asic[55]:687 Asic[56]:687
Asic[57]:687 Asic[58]:687 Asic[59]:687 Asic[60]:687 Asic[61]:687 Asic[62]:687
Chain:7 max freq=687
Chain:7 min freq=687
Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=606
Asic[ 0]:606
Asic[ 1]:606 Asic[ 2]:606 Asic[ 3]:606 Asic[ 4]:606 Asic[ 5]:606 Asic[ 6]:606 Asic[ 7]:606 Asic[ 8]:606
Asic[ 9]:606 Asic[10]:606 Asic[11]:606 Asic[12]:606 Asic[13]:606 Asic[14]:606 Asic[15]:606 Asic[16]:606
Asic[17]:606 Asic[18]:606 Asic[19]:606 Asic[20]:606 Asic[21]:606 Asic[22]:606 Asic[23]:606 Asic[24]:606
Asic[25]:606 Asic[26]:606 Asic[27]:606 Asic[28]:606 Asic[29]:606 Asic[30]:606 Asic[31]:606 Asic[32]:606
Asic[33]:606 Asic[34]:606 Asic[35]:606 Asic[36]:606 Asic[37]:606 Asic[38]:606 Asic[39]:606 Asic[40]:606
Asic[41]:606 Asic[42]:606 Asic[43]:606 Asic[44]:606 Asic[45]:606 Asic[46]:606 Asic[47]:606 Asic[48]:606
Asic[49]:606 Asic[50]:606 Asic[51]:606 Asic[52]:606 Asic[53]:606 Asic[54]:606 Asic[55]:606 Asic[56]:606
Asic[57]:606 Asic[58]:606 Asic[59]:606 Asic[60]:606 Asic[61]:606 Asic[62]:606
Chain:5 max freq=606
Chain:5 min freq=606
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=631
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:6 max freq=631
Chain:6 min freq=631
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=-68
Chain:7 base freq=687
Asic[ 0]:687
Asic[ 1]:687 Asic[ 2]:687 Asic[ 3]:687 Asic[ 4]:687 Asic[ 5]:687 Asic[ 6]:687 Asic[ 7]:687 Asic[ 8]:687
Asic[ 9]:687 Asic[10]:687 Asic[11]:687 Asic[12]:687 Asic[13]:687 Asic[14]:687 Asic[15]:687 Asic[16]:687
Asic[17]:687 Asic[18]:687 Asic[19]:687 Asic[20]:687 Asic[21]:687 Asic[22]:687 Asic[23]:687 Asic[24]:687
Asic[25]:687 Asic[26]:687 Asic[27]:687 Asic[28]:687 Asic[29]:687 Asic[30]:687 Asic[31]:687 Asic[32]:687
Asic[33]:687 Asic[34]:687 Asic[35]:687 Asic[36]:687 Asic[37]:687 Asic[38]:687 Asic[39]:687 Detect a bad chip=40 on chain[7], fixed to 400M
Asic[40]:687
Detect a bad chip=41 on chain[7], fixed to 400M
Asic[41]:687 Asic[42]:687 Detect a bad chip=43 on chain[7], fixed to 400M
Asic[43]:687 Asic[44]:687 Asic[45]:687 Asic[46]:687 Asic[47]:687 Asic[48]:687
Asic[49]:687 Asic[50]:687 Asic[51]:687 Asic[52]:687 Asic[53]:687 Asic[54]:687 Asic[55]:687 Asic[56]:687
Asic[57]:687 Asic[58]:687 Asic[59]:687 Asic[60]:687 Asic[61]:687 Asic[62]:687
Chain:7 max freq=687
Chain:7 min freq=687
max freq = 687
set baud=1
Chain[J6] PIC temp offset=62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=1a
Warning: Chain[5] chip[244] local:40 remote:-127 offset:-58, will fixed offset=27
New offset Chain[5] chip[244] local:40 remote:-127 offset:27
Chain[J6] chip[244] get middle temp offset=27 typeID=1a
Chain[J7] PIC temp offset=62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=1a
Warning: Chain[6] chip[244] local:37 remote:-77 offset:-111, will fixed offset=27
New offset Chain[6] chip[244] local:37 remote:-77 offset:27
Chain[J7] chip[244] get middle temp offset=27 typeID=1a
Chain[J8] PIC temp offset=62,-68,0,0,0,0,33,0
chain[7] temp chip I2C addr=0x98
Chain[J8] chip[244] use PIC middle temp offset=-68 typeID=1a
Warning: Chain[7] chip[244] local:38 remote:-83 offset:-104, will fixed offset=27
New offset Chain[7] chip[244] local:38 remote:-83 offset:27
Chain[J8] chip[244] get middle temp offset=27 typeID=1a
single board rate=4351 voltage limit=910 on chain[5]
get PIC voltage=910 on chain[5], check: must be < 910
retryFlag=1 will set the voltage limited on chain[5], change voltage=910
now set pic voltage=57 on chain[5]
single board rate=4531 voltage limit=890 on chain[6]
get PIC voltage=890 on chain[6], check: must be < 890
retryFlag=1 will set the voltage limited on chain[6], change voltage=890
now set pic voltage=91 on chain[6]
single board rate=4692 voltage limit=870 on chain[7]
get PIC voltage=870 on chain[7], check: must be < 870
retryFlag=1 will set the voltage limited on chain[7], change voltage=870
now set pic voltage=125 on chain[7]
Chain[J6] set working voltage=910 [57]
Chain[J7] set working voltage=890 [91]
Chain[J8] set working voltage=870 [125]
do heat board 8xPatten for 1 times
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=606 freq[01]=606 freq[02]=606 freq[03]=606 freq[04]=606 freq[05]=606 freq[06]=606 freq[07]=606
freq[08]=606 freq[09]=606 freq[10]=606 freq[11]=606 freq[12]=606 freq[13]=606 freq[14]=606 freq[15]=606
freq[16]=606 freq[17]=606 freq[18]=606 freq[19]=606 freq[20]=606 freq[21]=606 freq[22]=606 freq[23]=606
freq[24]=606 freq[25]=606 freq[26]=606 freq[27]=606 freq[28]=606 freq[29]=606 freq[30]=606 freq[31]=606
freq[32]=606 freq[33]=606 freq[34]=606 freq[35]=606 freq[36]=606 freq[37]=606 freq[38]=606 freq[39]=606
freq[40]=606 freq[41]=606 freq[42]=606 freq[43]=606 freq[44]=606 freq[45]=606 freq[46]=606 freq[47]=606
freq[48]=606 freq[49]=606 freq[50]=606 freq[51]=606 freq[52]=606 freq[53]=606 freq[54]=606 freq[55]=606
freq[56]=606 freq[57]=606 freq[58]=606 freq[59]=606 freq[60]=606 freq[61]=606 freq[62]=606
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:24885
last_nonce_num:17275
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=631 freq[01]=631 freq[02]=631 freq[03]=631 freq[04]=631 freq[05]=631 freq[06]=631 freq[07]=631
freq[08]=631 freq[09]=631 freq[10]=631 freq[11]=631 freq[12]=631 freq[13]=631 freq[14]=631 freq[15]=631
freq[16]=631 freq[17]=631 freq[18]=631 freq[19]=631 freq[20]=631 freq[21]=631 freq[22]=631 freq[23]=631
freq[24]=631 freq[25]=631 freq[26]=631 freq[27]=631 freq[28]=631 freq[29]=631 freq[30]=631 freq[31]=631
freq[32]=631 freq[33]=631 freq[34]=631 freq[35]=631 freq[36]=631 freq[37]=631 freq[38]=631 freq[39]=631
freq[40]=631 freq[41]=631 freq[42]=631 freq[43]=631 freq[44]=631 freq[45]=631 freq[46]=631 freq[47]=631
freq[48]=631 freq[49]=631 freq[50]=631 freq[51]=631 freq[52]=631 freq[53]=631 freq[54]=631 freq[55]=631
freq[56]=631 freq[57]=631 freq[58]=631 freq[59]=631 freq[60]=631 freq[61]=631 freq[62]=631
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:25853
last_nonce_num:55783
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=896 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=911
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=905 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=741 asic[27]=910 asic[28]=912 asic[29]=744 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=909 asic[39]=912
asic[40]=906 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=904
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=790 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[04]=896
core[001]=7 core[032]=7 core[033]=7 core[050]=7 core[051]=7 core[056]=7 core[057]=7 core[058]=6 core[066]=7 core[069]=7 core[073]=7 core[078]=7 core[088]=7 core[094]=7 core[104]=7
asic[15]=911
core[110]=7
asic[19]=905
core[001]=6 core[003]=7 core[017]=6 core[022]=7 core[058]=7
asic[26]=741
core[001]=5 core[034]=0 core[035]=1 core[036]=0 core[037]=1 core[038]=1 core[039]=1 core[040]=1 core[041]=1 core[042]=1 core[043]=1 core[044]=1 core[045]=1 core[046]=1 core[047]=1 core[048]=1 core[049]=0 core[050]=1 core[051]=1 core[052]=1 core[053]=1 core[054]=1 core[055]=1 core[056]=0 core[062]=7 core[086]=7 core[111]=7
asic[27]=910
core[108]=6
asic[29]=744
core[068]=3 core[069]=7 core[070]=7 core[071]=7 core[072]=7 core[073]=7 core[074]=7 core[075]=7 core[076]=7 core[077]=7 core[078]=7 core[079]=7 core[080]=7 core[081]=7 core[082]=7 core[083]=7 core[084]=7 core[085]=7 core[086]=7 core[087]=7 core[088]=7 core[089]=7 core[092]=7 core[093]=7 core[094]=7 core[095]=7 core[096]=0 core[097]=0 core[098]=0 core[099]=0 core[100]=0 core[101]=1 core[102]=0 core[103]=1 core[104]=1 core[105]=1 core[106]=1 core[107]=1 core[108]=0 core[109]=0 core[110]=0 core[111]=0 core[112]=0 core[113]=0
asic[38]=909
core[060]=5
asic[40]=906
core[037]=2
asic[47]=904
core[060]=6 core[106]=5 core[107]=7 core[109]=7 core[112]=7
asic[51]=790
core[016]=7 core[018]=5 core[019]=6 core[021]=7 core[022]=7 core[026]=6 core[027]=7 core[028]=7 core[030]=7 core[031]=7 core[032]=7 core[033]=7 core[034]=7 core[035]=7 core[037]=7 core[038]=7 core[039]=7 core[040]=6 core[041]=7 core[042]=6 core[043]=7 core[044]=7 core[045]=7 core[046]=6 core[048]=7 core[049]=7 core[050]=7 core[051]=7 core[052]=7 core[053]=7 core[055]=7 core[058]=6 core[060]=6 core[062]=4 core[064]=7 core[068]=7 core[072]=4 core[074]=7 core[075]=7 core[077]=7 core[078]=7 core[079]=6 core[080]=6 core[081]=7 core[082]=6 core[083]=6 core[084]=3 core[085]=6 core[086]=7 core[087]=6 core[088]=6 core[089]=6 core[090]=6 core[091]=6 core[092]=6 core[093]=6 core[094]=7 core[095]=6 core[096]=6 core[097]=6 core[098]=6 core[099]=7 core[100]=6 core[101]=6 core[102]=6 core[103]=6 core[104]=6 core[105]=7 core[106]=6 core[107]=6 core[108]=7 core[109]=7 core[110]=7 core[111]=6 core[112]=4 core[113]=7
freq[00]=687 freq[01]=687 freq[02]=687 freq[03]=687 freq[04]=687 freq[05]=687 freq[06]=687 freq[07]=687
freq[08]=687 freq[09]=687 freq[10]=687 freq[11]=687 freq[12]=687 freq[13]=687 freq[14]=687 freq[15]=687
freq[16]=687 freq[17]=687 freq[18]=687 freq[19]=687 freq[20]=687 freq[21]=687 freq[22]=687 freq[23]=687
freq[24]=687 freq[25]=687 freq[26]=687 freq[27]=687 freq[28]=687 freq[29]=687 freq[30]=687 freq[31]=687
freq[32]=687 freq[33]=687 freq[34]=687 freq[35]=687 freq[36]=687 freq[37]=687 freq[38]=687 freq[39]=687
freq[40]=687 freq[41]=687 freq[42]=687 freq[43]=687 freq[44]=687 freq[45]=687 freq[46]=687 freq[47]=687
freq[48]=687 freq[49]=687 freq[50]=687 freq[51]=687 freq[52]=687 freq[53]=687 freq[54]=687 freq[55]=687
freq[56]=687 freq[57]=687 freq[58]=687 freq[59]=687 freq[60]=687 freq[61]=687 freq[62]=687
total valid nonce number:56952
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:27313
last_nonce_num:15040
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: OK!
chain[6]: All chip cores are opened OK!
Test Patten on chain[6]: OK!
chain[7]: some chip cores are not opened FAILED!
Test Patten on chain[7]: FAILED!
do heat board 8xPatten for 2 times
do open core on Chain[7]...
Done open core on Chain[7]!
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=606 freq[01]=606 freq[02]=606 freq[03]=606 freq[04]=606 freq[05]=606 freq[06]=606 freq[07]=606
freq[08]=606 freq[09]=606 freq[10]=606 freq[11]=606 freq[12]=606 freq[13]=606 freq[14]=606 freq[15]=606
freq[16]=606 freq[17]=606 freq[18]=606 freq[19]=606 freq[20]=606 freq[21]=606 freq[22]=606 freq[23]=606
freq[24]=606 freq[25]=606 freq[26]=606 freq[27]=606 freq[28]=606 freq[29]=606 freq[30]=606 freq[31]=606
freq[32]=606 freq[33]=606 freq[34]=606 freq[35]=606 freq[36]=606 freq[37]=606 freq[38]=606 freq[39]=606
freq[40]=606 freq[41]=606 freq[42]=606 freq[43]=606 freq[44]=606 freq[45]=606 freq[46]=606 freq[47]=606
freq[48]=606 freq[49]=606 freq[50]=606 freq[51]=606 freq[52]=606 freq[53]=606 freq[54]=606 freq[55]=606
freq[56]=606 freq[57]=606 freq[58]=606 freq[59]=606 freq[60]=606 freq[61]=606 freq[62]=606
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:24882
last_nonce_num:27918
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=631 freq[01]=631 freq[02]=631 freq[03]=631 freq[04]=631 freq[05]=631 freq[06]=631 freq[07]=631
freq[08]=631 freq[09]=631 freq[10]=631 freq[11]=631 freq[12]=631 freq[13]=631 freq[14]=631 freq[15]=631
freq[16]=631 freq[17]=631 freq[18]=631 freq[19]=631 freq[20]=631 freq[21]=631 freq[22]=631 freq[23]=631
freq[24]=631 freq[25]=631 freq[26]=631 freq[27]=631 freq[28]=631 freq[29]=631 freq[30]=631 freq[31]=631
freq[32]=631 freq[33]=631 freq[34]=631 freq[35]=631 freq[36]=631 freq[37]=631 freq[38]=631 freq[39]=631
freq[40]=631 freq[41]=631 freq[42]=631 freq[43]=631 freq[44]=631 freq[45]=631 freq[46]=631 freq[47]=631
freq[48]=631 freq[49]=631 freq[50]=631 freq[51]=631 freq[52]=631 freq[53]=631 freq[54]=631 freq[55]=631
freq[56]=631 freq[57]=631 freq[58]=631 freq[59]=631 freq[60]=631 freq[61]=631 freq[62]=631
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:25858
last_nonce_num:27921
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=903 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=728 asic[27]=912 asic[28]=912 asic[29]=768 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=906 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=895 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[04]=903
core[000]=7 core[002]=7 core[024]=7 core[032]=7 core[033]=7 core[047]=7 core[056]=7 core[069]=7 core[071]=7
asic[26]=728
core[034]=0 core[035]=0 core[036]=0 core[037]=0 core[038]=0 core[039]=0 core[040]=0 core[041]=0 core[042]=0 core[043]=0 core[044]=0 core[045]=0 core[046]=0 core[047]=0 core[048]=0 core[049]=0 core[050]=0 core[051]=0 core[052]=0 core[053]=0 core[054]=0 core[055]=0 core[056]=0
asic[29]=768
core[096]=0 core[097]=0 core[098]=0 core[099]=0 core[100]=0 core[101]=0 core[102]=0 core[103]=0 core[104]=0 core[105]=0 core[106]=0 core[107]=0 core[108]=0 core[109]=0 core[110]=0 core[111]=0 core[112]=0 core[113]=0
asic[40]=906
core[037]=2
asic[51]=895
core[062]=5 core[084]=1 core[112]=1
freq[00]=687 freq[01]=687 freq[02]=687 freq[03]=687 freq[04]=687 freq[05]=687 freq[06]=687 freq[07]=687
freq[08]=687 freq[09]=687 freq[10]=687 freq[11]=687 freq[12]=687 freq[13]=687 freq[14]=687 freq[15]=687
freq[16]=687 freq[17]=687 freq[18]=687 freq[19]=687 freq[20]=687 freq[21]=687 freq[22]=687 freq[23]=687
freq[24]=687 freq[25]=687 freq[26]=687 freq[27]=687 freq[28]=687 freq[29]=687 freq[30]=687 freq[31]=687
freq[32]=687 freq[33]=687 freq[34]=687 freq[35]=687 freq[36]=687 freq[37]=687 freq[38]=687 freq[39]=687
freq[40]=687 freq[41]=687 freq[42]=687 freq[43]=687 freq[44]=687 freq[45]=687 freq[46]=687 freq[47]=687
freq[48]=687 freq[49]=687 freq[50]=687 freq[51]=687 freq[52]=687 freq[53]=687 freq[54]=687 freq[55]=687
freq[56]=687 freq[57]=687 freq[58]=687 freq[59]=687 freq[60]=687 freq[61]=687 freq[62]=687
total valid nonce number:57096
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:54017
last_nonce_num:45787
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: OK!
chain[6]: All chip cores are opened OK!
Test Patten on chain[6]: OK!
chain[7]: some chip cores are not opened FAILED!
Test Patten on chain[7]: FAILED!
setStartTimePoint total_tv_start_sys=393 total_tv_end_sys=394
restartNum = 2 , auto-reinit enabled...
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
do read_temp_func once...
do check_asic_reg 0x08
get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=70.1110 Asic[02]=61.7400 Asic[03]=69.6590 Asic[04]=69.3900 Asic[05]=72.4440 Asic[06]=67.4770 Asic[07]=67.9980 Asic[08]=65.8670
Asic[09]=66.6050 Asic[10]=71.4200 Asic[11]=68.1490 Asic[12]=71.3700 Asic[13]=70.0610 Asic[14]=66.5040 Asic[15]=72.2930 Asic[16]=71.6550
Asic[17]=76.2690 Asic[18]=68.2320 Asic[19]=71.2690 Asic[20]=63.2160 Asic[21]=70.1950 Asic[22]=68.3500 Asic[23]=72.2590 Asic[24]=71.5040
Asic[25]=71.4540 Asic[26]=66.4370 Asic[27]=61.7230 Asic[28]=68.6020 Asic[29]=68.2660 Asic[30]=70.8660 Asic[31]=68.6520 Asic[32]=64.4240
Asic[33]=67.9140 Asic[34]=71.1010 Asic[35]=68.1990 Asic[36]=66.4880 Asic[37]=67.4940 Asic[38]=69.4240 Asic[39]=70.3130 Asic[40]=69.9270
Asic[41]=68.3500 Asic[42]=70.5140 Asic[43]=64.6760 Asic[44]=70.6150 Asic[45]=63.3670 Asic[46]=68.6020 Asic[47]=65.4140 Asic[48]=67.2260
Asic[49]=67.9140 Asic[50]=71.1010 Asic[51]=70.3630 Asic[52]=68.8530 Asic[53]=69.6420 Asic[54]=72.9640 Asic[55]=68.4510 Asic[56]=69.9600
Asic[57]=68.1990 Asic[58]=65.3300 Asic[59]=66.3030 Asic[60]=71.2020 Asic[61]=62.4440 Asic[62]=65.4470 Asic[63]=64.8940
get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=72.3930 Asic[02]=70.5140 Asic[03]=77.0240 Asic[04]=73.8860 Asic[05]=72.7620 Asic[06]=69.2060 Asic[07]=74.6750 Asic[08]=74.5070
Asic[09]=70.2620 Asic[10]=71.8730 Asic[11]=67.6620 Asic[12]=77.1080 Asic[13]=73.8860 Asic[14]=68.1650 Asic[15]=71.7560 Asic[16]=68.4840
Asic[17]=70.0950 Asic[18]=68.8530 Asic[19]=67.9140 Asic[20]=71.3530 Asic[21]=70.1450 Asic[22]=69.5410 Asic[23]=70.7660 Asic[24]=66.5550
Asic[25]=70.3630 Asic[26]=65.2130 Asic[27]=70.2620 Asic[28]=73.9030 Asic[29]=72.6280 Asic[30]=75.2620 Asic[31]=74.3390 Asic[32]=67.1420
Asic[33]=74.5410 Asic[34]=71.9910 Asic[35]=77.6610 Asic[36]=70.5310 Asic[37]=70.6480 Asic[38]=67.9810 Asic[39]=72.6450 Asic[40]=64.3740
Asic[41]=75.4130 Asic[42]=71.5540 Asic[43]=70.7830 Asic[44]=77.7120 Asic[45]=67.8130 Asic[46]=64.6420 Asic[47]=69.7090 Asic[48]=78.1480
Asic[49]=68.4170 Asic[50]=69.0380 Asic[51]=66.7060 Asic[52]=72.3760 Asic[53]=72.1420 Asic[54]=76.7380 Asic[55]=73.1310 Asic[56]=71.9230
Asic[57]=65.5980 Asic[58]=70.3630 Asic[59]=79.3890 Asic[60]=76.7550 Asic[61]=70.0280 Asic[62]=68.0980 Asic[63]=65.0110
get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=84.5060 Asic[02]=79.6240 Asic[03]=72.4770 Asic[04]=74.6410 Asic[05]=80.2620 Asic[06]=80.6140 Asic[07]=76.1180 Asic[08]=81.0840
Asic[09]=76.1510 Asic[10]=80.3290 Asic[11]=78.5670 Asic[12]=78.2320 Asic[13]=79.9930 Asic[14]=78.0810 Asic[15]=79.4400 Asic[16]=80.2780
Asic[17]=78.6340 Asic[18]=77.5940 Asic[19]=81.8720 Asic[20]=74.9270 Asic[21]=83.2980 Asic[22]=81.3020 Asic[23]=79.3050 Asic[24]=73.8860
Asic[25]=78.6340 Asic[26]=79.4060 Asic[27]=63.4010 Asic[28]=72.4100 Asic[29]=78.9200 Asic[30]=64.9780 Asic[31]=81.4860 Asic[32]=73.8700
Asic[33]=74.5740 Asic[34]=82.4260 Asic[35]=71.6720 Asic[36]=77.3930 Asic[37]=77.3260 Asic[38]=73.5510 Asic[39]=82.9130 Asic[40]=77.4430
Asic[41]=44.1910 Asic[42]=50.3310 Asic[43]=80.2280 Asic[44]=45.7010 Asic[45]=78.6010 Asic[46]=74.7590 Asic[47]=85.4290 Asic[48]=77.5610
Asic[49]=78.4330 Asic[50]=80.0440 Asic[51]=75.5310 Asic[52]=68.8530 Asic[53]=79.8930 Asic[54]=75.2450 Asic[55]=76.8060 Asic[56]=77.0740
Asic[57]=79.1380 Asic[58]=81.3350 Asic[59]=73.7020 Asic[60]=83.0470 Asic[61]=77.5100 Asic[62]=79.4230 Asic[63]=74.2550
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=1a middle offset=27
Chain[5] Chip[62] local Temp=64
read failed on Chain[5] Chip[62] middle Temp old value:79
Special fix Chain[5] Chip[62] middle Temp = 79
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=1a middle offset=27
Chain[6] Chip[62] local Temp=61
read failed on Chain[6] Chip[62] middle Temp old value:76
Special fix Chain[6] Chip[62] middle Temp = 76
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=1a middle offset=27
Chain[7] Chip[62] local Temp=61
read failed on Chain[7] Chip[62] middle Temp old value:75
Special fix Chain[7] Chip[62] middle Temp = 76
Done read temp on Chain[7]
set FAN speed according to: temp_highest=64 temp_top1[PWM_T]=64 temp_top1[TEMP_POS_LOCAL]=64 temp_change=0 fix_fan_steps=0
FAN PWM: 78
read_temp_func Done!
CRC error counter=0
----------------
Have tried a lot of things such as rebooting and resetting, haven't tried flashing firmware again, so if anyone can help me i would really appreciate it.
Jump to: