Kanos Antminer Updates gone? | Bitcointalksearch.org

kano

legendary

Activity: 4466

Merit: 1798

Linux since 1997 RedHat 4

Quote from: kriptokyng on December 02, 2019, 08:09:13 PM

...
The average data is correct, but the 5 Second Report is all over the place.
...

Should be true of every miner on the planet.
The variance on 5 Seconds should be high.

The 'average' takes time to level out, probably an hour or two.

As I've mentioned before somewhere ... I once had something like a 1 hour runtime on an S3 average around 150% performance due to variance.

Shares are statistical results, so expecting them to provide short term consistent averages is simply misunderstanding what a miner is doing
(or fudging the data)

kriptokyng

jr. member

Activity: 49

Merit: 2

Yeah, still pretty happy with the numbers.
3 BitMain S3

#3 is the Big Worker
Average 488.34
Freq 250
Best 2,711,823,571

#1
Average 477.03
Freq 237
Best 16,426,915

#2
Average 483.23
Freq 237
Best 13,765,322

Wish I could get the other 2 to the 250 Freq without dropping a chip.

Code:

{
   "workername": "3KbZg8kao8AEeXEG7C97Z6XNMGFiT5Ue6k",
   "hashrate1m": "1.36T",
   "hashrate5m": "1.52T",
   "hashrate1hr": "1.49T",
   "hashrate1d": "1.42T",
   "hashrate7d": "878G",
   "lastshare": 1575568669,
   "shares": 327193492,
   "bestshare": 2711823570.637253,
   "bestever": 2711823570
  }

NotFuzzyWarm

legendary

Activity: 3612

Merit: 2506

Evil beware: We have waffles!

Sorta surprised Kano hasn't popped in here Wink

One thing he'd probably mention to keep in mind is that the default polling rate that AM uses is something like 10 sec or so which is far far more than needed. Per his advice long ago I have AM set to poll my farms miners once every 240sec. (been ages since I changed it so don't remember the default). Increasing the polling interval will of course also smooth out AM's hash rate graph.

Using faster polling give ya more instantaneous snapshots but as you are seeing, it is the average rates that matters. There is a lot of diff bounce among the shares being sent and that translates into apparent instantaneous speed differences. Using AM I mainly only care about the shares being accepted. Most pools will adj miner diff to produce an average of 18 shares/minute so setting a trigger for no shares accepted over say 3 min or more is prudent.

kriptokyng

jr. member

Activity: 49

Merit: 2

Quote from: ?? on ??

It's bounce all over the place as well on the web interface.

OK, let it run for about 6 Hours. Pretty happy with it. They settle down to the 480's.
Yeah, Awesome Miner doesn't like something with this firmware.
The average data is correct, but the 5 Second Report is all over the place.

But Gonna Let them Eat

Kripto01 - 4875.57 GHs
Kripto02 - 500.31 GHs
Kripto03 - 492.85 Ghs

All Running at 40 C Degrees and Freq 250 MHz

Thanks For the Help Guys

Code:

"hashrate1m": "1.52T",
"hashrate5m": "1.49T",
"hashrate1hr": "1.46T",
"hashrate1d": "846G",
"hashrate7d": "596G",
"lastshare": 1575330818,
"workers": 3,
"shares": 246088392,
"bestshare": 773031278.0672181,
"bestever": 773031278,

Biffa

legendary

Activity: 3220

Merit: 1220

Forget awesome miner, what does it show on the miner interface, and what does it show on the pool?

kriptokyng

jr. member

Activity: 49

Merit: 2

I tried -2 version and it did the same thing.

philipma1957

legendary

Activity: 4102

Merit: 7765

'The right to privacy matters'

Quote from: kriptokyng on December 02, 2019, 12:47:10 AM

I updated this to my current S3 and now my hash rates displayed in Awesome Miner are all over the place.

this is a very old thread. it may be out of date.

maybe kano will reply if it still works with awesome miner and the s-3

kriptokyng

jr. member

Activity: 49

Merit: 2

I updated this to my current S3 and now my hash rates displayed in Awesome Miner are all over the place. I did a couple of reboots and no change. It would display 1.1+ THs and drop down to nothing. I am currently running on firmware antMiner_S320150109.bin. I am Solo Mining and was looking to try this out. Do I need down grade my firmware to a older version?

Thanks in Advance

3X Bitmain S3
Awesome Miner 7.1.1
1.33 THs

gt_addict

hero member

Activity: 2492

Merit: 621

kano, ive flashed new bitmain firmware to my new (to me) s3+ in an attempt to bring the HW% down from 0.225% and I want to flash you update over the top but when I putty in it and type in the wget command line, it returns with "server returned error HTTP/1.1 404 not found".

Is this something ive done wrong or something to do with where the updates are stored?

Thanks for you help in advance

Edit:- I didn't put the capital "A & S" in AntS3. Blimey ssh can be a touchy mistress Roll Eyes

gt_addict

hero member

Activity: 2492

Merit: 621

Fantastic thank you both. It should be arriving tomorrow so I'll get it updated asap Grin

kano

legendary

Activity: 4466

Merit: 1798

Linux since 1997 RedHat 4

Oh, I guess someone didn't like that fact that I had binaries there for about 4 years Tongue

I've also put the git here:
https://bitbucket.org/TheKano/cgminer-binaries/src

toptek

legendary

Activity: 1274

Merit: 1000

Quote from: gt_addict on March 14, 2016, 04:23:19 PM

Hi everyone,

So ive got another S3+ arriving soon and would like to update it to Kanos wonderful update, but its not accessible through the github website. Does anyone have a different link or have it saved on there computer (stupid me I didn't save it Undecided

) so I can update my next S3?

Thanks.

This works or just did for me

i was able to download the tar to a pi.

http://kano.is/AntS3/cgminer-ants3-4.9.2-94e04f6-3.tgz

Code:

cd /
wget http://kano.is/AntS3/cgminer-ants3-4.9.2-94e04f6-3.tgz
tar -xvzf cgminer-ants3-4.9.2-94e04f6-3.tgz
rm cgminer-ants3-4.9.2-94e04f6-3.tgz
cgset
sync
reboot

gt_addict

hero member

Activity: 2492

Merit: 621

Hi everyone,

So ive got another S3+ arriving soon and would like to update it to Kanos wonderful update, but its not accessible through the github website. Does anyone have a different link or have it saved on there computer (stupid me I didn't save it Undecided

) so I can update my next S3?

Thanks.

Topic: Kanos Antminer Updates gone? (Read 2123 times)