Topic: knc titan Hardware Troubleshooting | Performance Vs Temps | DC/DC *Post Stats* (Read 1192 times)
May 02, 2015, 02:29:34 AM
Post your stats here
May 02, 2015, 02:20:27 AM
hi MisO69,
yes factory reset worked, i then did firmware 2.0 and all is good, all miners are set to -0.0366V @ 325mhz which seems to give the best performance and stay low in 90oC temps.
yes factory reset worked, i then did firmware 2.0 and all is good, all miners are set to -0.0366V @ 325mhz which seems to give the best performance and stay low in 90oC temps.
May 01, 2015, 09:03:01 AM
help, advanced settings only shows 1 miner.
Update to 2.0 firmware, shut down (off), power on.
Did you maybe set your voltage settings too low in the advanced options?
April 30, 2015, 07:05:22 PM
help, advanced settings only shows 1 miner.
Jump to: