Hi thanks to your replies. Well about the heat: My ASICS has 45 degrees. How can I make them more hot? Disable the fans?
Great idea Einstein!
You must be pretty smart guy
Topic: KncMiner Saturn underperforming (Read 1413 times)
Great idea Einstein!
You must be pretty smart guy
The latest firmware allows you to tweak the voltage per die per asic. Hit their support forum and read about it. Many October owners are struggling with this.
You work with open miner, or did you close the case (not sure that your knc has a case for close as mine)
If i open or close my case the temperature difference between 5-10 degree.
If i open or close my case the temperature difference between 5-10 degree.
Well the miner is at home. Room temperature is about 20 degrees.
NO! Of course not...but how is your environment, where the miner stay and work? Where do you live?
Hi thanks to your replies. Well about the heat: My ASICS has 45 degrees. How can I make them more hot? Disable the fans?
All KNC love it hot, even my jupiter. If the temp going under 50 degree i lose at least 10GH/s, if over 60 run smooth and perfect with 680Gh/s instead of 650!
Hi guys, I got an Saturn (October Batch) and it is underperforming -> ....
Nothing helped. Do you know what I can do else?
Thank you guys!
Nothing helped. Do you know what I can do else?
Thank you guys!
October loves when it is hot. What is your temperatures? Go up to 75-80 C when check again.
PS bertmod helps a lot with diagnostics and without any harm.
All ASIC Miner are specified with optimum Gh/s +/- 10%. In your case if the optimum amount is 270-275Gh/s, you calculate -10% and you are still within the specification.
270-27 > 240
He is not within...
Well to be honest if I buy something and I have varranty that it WILL work within specific speed, and it does NOT, then at least I would like an explanation why, or other kind of assistance
All ASIC Miner are specified with optimum Gh/s +/- 10%. In your case if the optimum amount is 270-275Gh/s, you calculate -10% and you are still within the specification.
270-27 > 240
He is not within...
All ASIC Miner are specified with optimum Gh/s +/- 10%. In your case if the optimum amount is 270-275Gh/s, you calculate -10% and you are still within the specification.
270-27 > 240
He is not within...
All ASIC Miner are specified with optimum Gh/s +/- 10%. In your case if the optimum amount is 270-275Gh/s, you calculate -10% and you are still within the specification.
Is normal for your batch, sorry.
Hi guys, I got an Saturn (October Batch) and it is underperforming -> running at 240 Ghs, but it should have 275 GHs.
It is running with the firmware 0.99.1-tune
I did:
- downgraded the firmware to 0.98.1
- hard reset
- enablecores.bin
Nothing helped. Do you know what I can do else?
Thank you guys!
It is running with the firmware 0.99.1-tune
I did:
- downgraded the firmware to 0.98.1
- hard reset
- enablecores.bin
Nothing helped. Do you know what I can do else?
Thank you guys!
Jump to: