Topic: Latest R4 upgrade decreased my HW errors (Read 927 times)

That's what I thought, but after several attempts I receive unsuccessful/incorrect file related messages, which is what prompted my post.

That was last night.

This morning, after a few more reboots and restarts, I finally got the firmware upgraded.

Unfortunately, one of the boards is still not running.

Thanks for the reply

No need to extract, just use the *.tar.gz file as flash image

I'm trying to upgrade the firmware on a R4.

Not to show my ignorance, but, after I download the firmware/zip file - I extracted the file and can't locate the actual file that I need to use (.tar ?)

Well, I guess I am showing my ignorance.......

One thing I noticed is the new firmware does not allow overclocking and does not show exact hash board state. If some chip on the hash board are defective, it won't show which ones are. But you can tell by reduced hash rate.

BTW, where can you find HW errors? What are the numbers?

Yes I like R4. I have to give  up S9 way too loud. I have R4 for six months. Some of them start having problems. Here are the errors from logs. Do you know whether a new hash board is needed for this type of error?

Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=493 freq[01]=543 freq[02]=543 freq[03]=404 freq[04]=543 freq[05]=543 freq[06]=543 freq[07]=543
freq[08]=543 freq[09]=529 freq[10]=543 freq[11]=543 freq[12]=543 freq[13]=543 freq[14]=543 freq[15]=543
freq[16]=543 freq[17]=543 freq[18]=543 freq[19]=493 freq[20]=543 freq[21]=550 freq[22]=550 freq[23]=550
freq[24]=550 freq[25]=504 freq[26]=550 freq[27]=550 freq[28]=550 freq[29]=550 freq[30]=431 freq[31]=550
freq[32]=550 freq[33]=550 freq[34]=550 freq[35]=550 freq[36]=550 freq[37]=550 freq[38]=550 freq[39]=550
freq[40]=550 freq[41]=550 freq[42]=550 freq[43]=550 freq[44]=550 freq[45]=550 freq[46]=550 freq[47]=550
freq[48]=550 freq[49]=550 freq[50]=550 freq[51]=550 freq[52]=550 freq[53]=550 freq[54]=550 freq[55]=529
freq[56]=550 freq[57]=550 freq[58]=550 freq[59]=550 freq[60]=443 freq[61]=550 freq[62]=550
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:65146
last_nonce_num:40077
chain[6]: some chip cores are not opened FAILED!
Test Patten on chain[6]: FAILED!
chain[7]: All chip cores are opened OK!
Test Patten on chain[7]: OK!
setStartTimePoint total_tv_start_sys=465 total_tv_end_sys=466
restartNum = 2 , auto‐reinit enabled...

Had not checked for an R4 firmware update for several weeks, but there is definitely one available from Bitmain Support

Click link above to download, or visit the website https://shop.bitmain.com/support.htm?pid=007201612090211421457I07aFFE0609

Thanks for the heads up - flashing new firmware now! 

@powrslave

Which image do you use ? The last one from Bitmain site ?

At which frequency you are running your R4 ?

I wasn't getting a lot of hardware errors but upgraded anyway 
This is the best home miner, hope they make more I'd like to heat my entire house this winter. The S9 is too loud I had to get it hosted at giga watt, which isn't a bad thing but it's nice getting free heat in the winter, the R4 is perfect for that.

Just wanted to let you know I used to get a lot of HW errors on my 2nd board on one of my R4 miners.

Errors dropped significantly.

Kernel Version   Linux 3.14.0-xilinx-gb190cb0-dirty #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
File System Version   Sat Apr 29 20:06:48 EDT 2017