Author

Topic: Leaserig reputation thread - martynw2000 (Read 3317 times)

member
Activity: 117
Merit: 10
July 13, 2014, 04:01:52 PM
#26
Thanks Joe
newbie
Activity: 18
Merit: 0
Now I'm almost done my 12 hours hired session with GSD0 (7.2 MH/s)

Overall, I'm satisfy with the service I got.
Rate of the rig given as state.

Will return to uses your service again later.  Smiley

Added : Just to share info to the other
my reject rate is about 1%  @  ltc.ghash.io
member
Activity: 117
Merit: 10
Nope - hardly any hardware errors. There's nothing going wrong with any of my three rigs right now. In fact last night while the rigs weren't being rented, I was mining at multipool.us, and there were hardly any rejects at all.
legendary
Activity: 2044
Merit: 1055
I've just leased GSD0 and GSD2, mining at wafflepool.

Both rigs has over 10% rejects at the european server, us-east is much better. Where are the rigs located?

Edit:
Switched back to the european server and now it's better, maybe you had trouble with your internet connection? Wafflepool servers has been very reliable (I'm mining there with some gridseeds). Hashrate at leaserig.net for GSD2 is much too high at 11 MH, but pool rate is correct.


The rigs are in the UK. GSD0 is 20 gridseeds, GSD2 is 4 gridseed blades, however right now only 3 are working properly due to one of the PSUs being faulty, I should have that resolved soon, but this is why when you rented the rig it was rated at 8.4Mh, not 11.4Mh. If I get it working then you'll benefit from the extra 3Mh/s free of charge.

Reject rate seems fairly normal to me. I've been sitting here watching the shares go by on both rigs for the past 5 minutes and there are lots and lots of accepted shares, and maybe the odd one that is rejected. Since wafflepool is a multi-pool, it's possible they were mining a quick coin or something that pushed the reject rate up. It happens. From my side however, everything looks nice and stable.

I have two gridseeds at the same server right now with under 0.5% rejects, so coinswitching cannot be the cause. Maybe you clocked your blades too high, do you have hardware errors?
member
Activity: 117
Merit: 10
I've just leased GSD0 and GSD2, mining at wafflepool.

Both rigs has over 10% rejects at the european server, us-east is much better. Where are the rigs located?

Edit:
Switched back to the european server and now it's better, maybe you had trouble with your internet connection? Wafflepool servers has been very reliable (I'm mining there with some gridseeds). Hashrate at leaserig.net for GSD2 is much too high at 11 MH, but pool rate is correct.


The rigs are in the UK. GSD0 is 20 gridseeds, GSD2 is 4 gridseed blades, however right now only 3 are working properly due to one of the PSUs being faulty, I should have that resolved soon, but this is why when you rented the rig it was rated at 8.4Mh, not 11.4Mh. If I get it working then you'll benefit from the extra 3Mh/s free of charge.

Reject rate seems fairly normal to me. I've been sitting here watching the shares go by on both rigs for the past 5 minutes and there are lots and lots of accepted shares, and maybe the odd one that is rejected. Since wafflepool is a multi-pool, it's possible they were mining a quick coin or something that pushed the reject rate up. It happens. From my side however, everything looks nice and stable.
legendary
Activity: 2044
Merit: 1055
I've just leased GSD0 and GSD2, mining at wafflepool.

Both rigs has over 10% rejects at the european server, us-east is much better. Where are the rigs located?

Edit:
Switched back to the european server and now it's better, maybe you had trouble with your internet connection? Wafflepool servers has been very reliable (I'm mining there with some gridseeds). Hashrate at leaserig.net for GSD2 is much too high at 11 MH, but pool rate is correct.
member
Activity: 117
Merit: 10
Dear all,

Had a few issues with power cuts today, I've added 10 minutes to everyone's lease free of charge as compensation.
full member
Activity: 201
Merit: 100
I'm now renting GSD0, suddenly it went offline, please fix. thanks
member
Activity: 117
Merit: 10
hi,

i hire your rig for 6 hours and i got 48% rejects for about 2 hours and 50 minutes




The rig is operating normally. I suspect it was a problem with the pool you were using. The other pool you had set up seemed normal.
newbie
Activity: 1
Merit: 0
hi,

i hire your rig for 6 hours and i got 48% rejects for about 2 hours and 50 minutes

http://cdn.imghack.se/images/5622ff033c0b07d7961a1e4f4cb3f5bd.jpg

member
Activity: 117
Merit: 10
i purchased a 48 hour contract. i am currently only 1/4 of the way through it, and this rig is fantastic. I will certainly be interested in purchasing again!

Thanks,

I'll add on an extra 30 mins for you. Glad you like the rig.
newbie
Activity: 33
Merit: 0
i purchased a 48 hour contract. i am currently only 1/4 of the way through it, and this rig is fantastic. I will certainly be interested in purchasing again!
member
Activity: 117
Merit: 10
hello martyn,

I have rented your rig for the last 12 hours. I am very satiesfied about the hash rate, but I hope you can help me out . I have also a rig with 12 gridseeds but the hash rate of my rig in the pool is the half of the rate what i see on my miner.  I am using a windows 7 dual core with 2 GB and windows 7 64 Bit.  I have configured cgminer 3.7.2. Do you have some tips how to solve this.

thanks in advance




What pool are you using? Have you tried a different pool? It's possible that you're getting a lot of rejects on the pool you're using. Personally I've found the Gridseeds to be quite consistent at about 850Mhz. If you're pushing the speed of them over this, you might be getting a lot of hardware errors too that will lower the stats at the pool. Maybe send me a screenshot of your mining screen - that might give some clues as to what's going on.
newbie
Activity: 1
Merit: 0
hello martyn,

I have rented your rig for the last 12 hours. I am very satiesfied about the hash rate, but I hope you can help me out . I have also a rig with 12 gridseeds but the hash rate of my rig in the pool is the half of the rate what i see on my miner.  I am using a windows 7 dual core with 2 GB and windows 7 64 Bit.  I have configured cgminer 3.7.2. Do you have some tips how to solve this.

thanks in advance

member
Activity: 117
Merit: 10

Support 10/10 !

Rigs speed CORRECT(even some more than suppose to be!)

No issues, everything works perfect.



Well working rigs with amazing support from martynw2000!

I was beginner at minning, but martynw2000 explained me everything, help up with set up rigs. And he answer my PM's after like 2 minutes  Grin


Simply the best.

You're welcome VladMaster, come back anytime and claim your free 30mins mining.
full member
Activity: 140
Merit: 100

Support 10/10 !

Rigs speed CORRECT(even some more than suppose to be!)

No issues, everything works perfect.



Well working rigs with amazing support from martynw2000!

I was beginner at minning, but martynw2000 explained me everything, help up with set up rigs. And he answer my PM's after like 2 minutes  Grin


Simply the best.
newbie
Activity: 1
Merit: 0
GSD0 as expected. Recommended!
member
Activity: 117
Merit: 10
April 18, 2014, 05:34:18 AM
#9
i've hired again with martynw2000 - GSD1 this time - excellent rig, stable and solid. i'll be back again, no doubt!
thanks dude.

Lease extended by 30mins for free. Thanks for leaving positive feedback.
sr. member
Activity: 434
Merit: 250
April 16, 2014, 01:28:23 PM
#8
i've hired again with martynw2000 - GSD1 this time - excellent rig, stable and solid. i'll be back again, no doubt!
thanks dude.
member
Activity: 117
Merit: 10
April 07, 2014, 06:53:43 PM
#7
Review of martynw2000 leaserig rental.

I rented this rig for 24 hours and everything was great. rig showed (at pool) the expected hashrate with a very low number of rejects.
rig owner was polite and courteous, as you can see from above. I would certainly recommend this rig owner for rentals.

bets wishes,

Rus

You're welcome Rus, come back anytime.
sr. member
Activity: 434
Merit: 250
April 07, 2014, 02:48:21 PM
#6
Review of martynw2000 leaserig rental.

I rented this rig for 24 hours and everything was great. rig showed (at pool) the expected hashrate with a very low number of rejects.
rig owner was polite and courteous, as you can see from above. I would certainly recommend this rig owner for rentals.

bets wishes,

Rus
sr. member
Activity: 434
Merit: 250
April 06, 2014, 12:47:37 PM
#5
Hi Martyn

you rig just went off mate, can you look into this please.

EDIT, scrap that it's up again.  Grin

Yeah, I noticed it and then before I could react it was up again. Actually, the rig was hashing fine throughout, but for some reason the proxy software said it was offline. Strange.

Incidentally, one of the polls you've selected is saying "Pool connection failed" constantly. Dunno if you knew this.

yeah, it's OK, the other pool is a coin launch, due in 45 minutes or so, i'll switch it when i know the pool is working OK. but hey, thanks for a great service so far... i'll write up a review on this thread once the contract ends.
member
Activity: 117
Merit: 10
April 06, 2014, 12:39:47 PM
#4
Hi Martyn

you rig just went off mate, can you look into this please.

EDIT, scrap that it's up again.  Grin

Yeah, I noticed it and then before I could react it was up again. Actually, the rig was hashing fine throughout, but for some reason the proxy software said it was offline. Strange.

Incidentally, one of the polls you've selected is saying "Pool connection failed" constantly. Dunno if you knew this.
sr. member
Activity: 434
Merit: 250
April 06, 2014, 11:48:37 AM
#3
Hi Martyn

you rig just went off mate, can you look into this please.

EDIT, scrap that it's up again.  Grin
donator
Activity: 686
Merit: 519
It's for the children!
April 04, 2014, 06:20:36 PM
#2
Key Verified an Ebay account with 13 years of history and 683 Positive feedback!

Holding a security deposit of .33BTC

Happy leasing!

Please leave provider feedback
member
Activity: 117
Merit: 10
April 04, 2014, 04:03:56 PM
#1
I have three rigs available for rent:

GSD0 at 7.2Mh/s
GSD1 at 7.2Mh/s
GSD2 at 11.2Mh/s

Each rig is comprised of Gridseed scrypt asics (all stable) along with battery backup and a very stable internet connection. I'm an experienced miner, having started out mining Bitcoin directly back in March 2013, and then switching to Litecoin, followed by Dogecoin, and most recently I've been mining in some of the multipools. I'm based in Europe, and all rigs have been operating flawlessly for many days with virtually no downtime.

All rigs are available for rental. Any downtime that occurs during your rental period will be reimbursed (as long as it was a fault with the rig, not with the pool you selected). I will also offer a generous discount for return customers.

Rig 1 - https://leaserig.net/index.jsp?page=hire&rigid=788
Rig 2 - https://leaserig.net/index.jsp?page=hire&rigid=789
Rig 3 - https://leaserig.net/index.jsp?page=hire&rigid=907

Automatic 2% reduction if you rehire before your hiring plan expires
FREE 30mins on my rig if you hire for 6hrs or more and leave a positive review on this thread. (please email me if you do this so I can add on the minutes)


Please note: it's best to use pools that use vardiff, or share difficulties of 256 and above. Lower share difficulties will not be as efficient with these gridseed rigs. Please bear this in mind when renting.
Jump to: