ALSO ... I have a stack of books here like "Learning the Bash Shell", "DNS and Bind", "Learning PERL", "Advanced PERL Programming", "PERL for system administration", "Learning the Vi editor", "PHP and MYSQL" .... and LOTS MORE. I probably have a book on the topic that would cover editing init.d files, but I'm confused where to look.
this /etc/init.d file editing, what or where should I look? What language is the init.d files in?
Thanks
Topic: LED config on a TP-Link tp-703n running nwoolls firmware (Read 471 times)
I'm stumped.
I have a TP Link tp-703n router that has been re-flashed with NWoolls v4.5.0-r1 firmware.
There is no GUI due to the limited RAM onboard the tp-703n so everything is done via ssh or serial so its not as easy as ticking a couple boxes and clicking save/apply.
I have managed to get bfgminer running automatically on boot but I have one more thing I would like to have.
I would like to have the tp-link:blue:system LED set to netdev for rx and tx activity
currently the LED is off
below is the /etc/init.d/led contents.... I'm hardly a programmer, I'm more of a "lets see what this does" person... which I usually learn from my mistakes, but this has me stumped.
If someone could make the appropriate changes to the /etc/init.d/led file and post it in the comments here, I'd greatly appreciate it.
Maybe highlight the changed so I can see what was changed and learn.
Thanks
----------------------------------------------------------------------------------
Code:
#!/bin/sh /etc/rc.common
# (C) 2008 openwrt.org
START=96
load_led() {
local name
local sysfs
local trigger
local dev
local mode
local default
local delayon
local delayoff
local interval
config_get sysfs $1 sysfs
config_get name $1 name "$sysfs"
config_get trigger $1 trigger "none"
config_get dev $1 dev
config_get mode $1 mode "link"
config_get_bool default $1 default "nil"
config_get delayon $1 delayon
config_get delayoff $1 delayoff
config_get interval $1 interval "50"
config_get port_state $1 port_state
[ -e /sys/class/leds/${sysfs}/brightness ] && {
echo "setting up led ${name}"
[ "$default" != nil ] && {
[ $default -eq 1 ] &&
echo 1 >/sys/class/leds/${sysfs}/brightness
[ $default -eq 1 ] ||
echo 0 >/sys/class/leds/${sysfs}/brightness
}
echo $trigger > /sys/class/leds/${sysfs}/trigger
case "$trigger" in
"netdev")
[ -n "$dev" ] && {
echo $dev > /sys/class/leds/${sysfs}/device_name
echo $mode > /sys/class/leds/${sysfs}/mode
}
;;
"timer")
[ -n "$delayon" ] && \
echo $delayon > /sys/class/leds/${sysfs}/delay_on
[ -n "$delayoff" ] && \
echo $delayoff > /sys/class/leds/${sysfs}/delay_off
;;
"usbdev")
[ -n "$dev" ] && {
echo $dev > /sys/class/leds/${sysfs}/device_name
echo $interval > /sys/class/leds/${sysfs}/activity_interval
}
;;
"port_state")
[ -n "$port_state" ] && \
echo $port_state > /sys/class/leds/${sysfs}/port_state
;;
switch[0-9]*)
local port_mask
config_get port_mask $1 port_mask
[ -n "$port_mask" ] && \
echo $port_mask > /sys/class/leds/${sysfs}/port_mask
;;
esac
}
}
start() {
[ -e /sys/class/leds/ ] && {
config_load system
config_foreach load_led led
}
}
- /etc/init.d/led 80/80 100%
# (C) 2008 openwrt.org
START=96
load_led() {
local name
local sysfs
local trigger
local dev
local mode
local default
local delayon
local delayoff
local interval
config_get sysfs $1 sysfs
config_get name $1 name "$sysfs"
config_get trigger $1 trigger "none"
config_get dev $1 dev
config_get mode $1 mode "link"
config_get_bool default $1 default "nil"
config_get delayon $1 delayon
config_get delayoff $1 delayoff
config_get interval $1 interval "50"
config_get port_state $1 port_state
[ -e /sys/class/leds/${sysfs}/brightness ] && {
echo "setting up led ${name}"
[ "$default" != nil ] && {
[ $default -eq 1 ] &&
echo 1 >/sys/class/leds/${sysfs}/brightness
[ $default -eq 1 ] ||
echo 0 >/sys/class/leds/${sysfs}/brightness
}
echo $trigger > /sys/class/leds/${sysfs}/trigger
case "$trigger" in
"netdev")
[ -n "$dev" ] && {
echo $dev > /sys/class/leds/${sysfs}/device_name
echo $mode > /sys/class/leds/${sysfs}/mode
}
;;
"timer")
[ -n "$delayon" ] && \
echo $delayon > /sys/class/leds/${sysfs}/delay_on
[ -n "$delayoff" ] && \
echo $delayoff > /sys/class/leds/${sysfs}/delay_off
;;
"usbdev")
[ -n "$dev" ] && {
echo $dev > /sys/class/leds/${sysfs}/device_name
echo $interval > /sys/class/leds/${sysfs}/activity_interval
}
;;
"port_state")
[ -n "$port_state" ] && \
echo $port_state > /sys/class/leds/${sysfs}/port_state
;;
switch[0-9]*)
local port_mask
config_get port_mask $1 port_mask
[ -n "$port_mask" ] && \
echo $port_mask > /sys/class/leds/${sysfs}/port_mask
;;
esac
}
}
start() {
[ -e /sys/class/leds/ ] && {
config_load system
config_foreach load_led led
}
}
- /etc/init.d/led 80/80 100%
Jump to: