libbitcoin vulnerability and armory | Bitcointalksearch.org

goatpig

legendary

Activity: 3794

Merit: 1375

Armory Developer

Quote from: Carlton Banks on August 18, 2023, 08:41:45 AM

also, I feel must take some responsibility for this thread appearing. it seems I misremembered whether Armory uses libbitcoin or not, and so should have not said anything at all without properly checking. it seems that in production Armory (0.96.5) all RNG seeding is not libbitcoin code, and in fact libbitcoin code isn't used at all in 0.96.5 (or 0.96.x inclusive)

so I hope nobody was in any way alarmed by what I said in the Dev&Tech thread linked in the OP

No harm done, better safe than sorry.

Carlton Banks

legendary

Activity: 3430

Merit: 3080

FWIW I intend to look at this again over the weekend, and simply haven't had time up to now. goatpig's review will inevitably be far higher quality than anything I do, what I end up saying won't amount to much more than a simple "thumbs up" (and that's despite goatpig being the author of at least some of the relevant code)

also, I feel must take some responsibility for this thread appearing. it seems I misremembered whether Armory uses libbitcoin or not, and so should have not said anything at all without properly checking. it seems that in production Armory (0.96.5) all RNG seeding is not libbitcoin code, and in fact libbitcoin code isn't used at all in 0.96.5 (or 0.96.x inclusive)

so I hope nobody was in any way alarmed by what I said in the Dev&Tech thread linked in the OP

goatpig

legendary

Activity: 3794

Merit: 1375

Armory Developer

Some final notes:

I haven't looked at the libbitcoin RNG code, but it seems the issue isnt with libbitcoin per se but with libbitcoin explorer (aka "bx") handling of PRNG outputs for the purpose of wallet seeds. At any rate, Armory doesn't use that code, so it's not affected.

goatpig

legendary

Activity: 3794

Merit: 1375

Armory Developer

Entropy buffer size

On both versions, entropy buffer size is set to 32, but is it effective? The issue with "bx" (hadn't heard of this before now) is that no matter how much entropy it fetched to seed a wallet, it would be clamped down the 4 bytes. 4 bytes of entropy is way too low, attackers would create wallets for the entire space and look at all BIP44/49/84 roots, and sweep the coins.

1) In Armory, the buffer init code has not changed. Both 0.96.5 and the new code create a SecureBinaryData object, of numBytes.

dev: https://github.com/goatpig/BitcoinArmory/blob/dev/cppForSwig/EncryptionUtils.cpp#L31
master (0.96.5): https://github.com/goatpig/BitcoinArmory/blob/master/cppForSwig/EncryptionUtils.cpp#L86

2) SecureBinaryData is a child class of BinaryData, the size_t ctor defers to BinaryData(size_t).

dev: https://github.com/goatpig/BitcoinArmory/blob/dev/cppForSwig/SecureBinaryData.h#L55
master: https://github.com/goatpig/BitcoinArmory/blob/master/cppForSwig/EncryptionUtils.h#L142

3) The BinaryData(size_t) is the same in both instances:

dev: https://github.com/goatpig/BitcoinArmory/blob/dev/cppForSwig/BinaryData.h#L110
master: https://github.com/goatpig/BitcoinArmory/blob/master/cppForSwig/BinaryData.h#L111

4) It uses BinaryData::alloc, which calls std::vector::resize:

dev: https://github.com/goatpig/BitcoinArmory/blob/dev/cppForSwig/BinaryData.h#L569
master: https://github.com/goatpig/BitcoinArmory/blob/master/cppForSwig/BinaryData.h#L599

5) The underlying vector is of uint8_t, i.e. bytes. Therefor the ctor allocates numBytes before filling it with random bytes. NumBytes is set to 32 in 0.96.5, in dev it can vary, as it allows for 16 bytes of entropy for 12 word BIP39 backups.

goatpig

legendary

Activity: 3794

Merit: 1375

Armory Developer

Armory 0.97 (WIP, dev branch) (TLDR; not affected)

This uses libbtc, not libbitcoin per se, though I plan to move to libbitcoin cause libbtc is rough around the edges and libbitcoin is getting all the attention these days (+ it's a C++ implementation, not plain C).

Wallet creation can happen in many places in the new code, kinda pointless to try and pin it down (all depends on whether it has a seed or not). It's simpler to look at the RNG class where all entropy comes from.

1) The main RNG class: https://github.com/goatpig/BitcoinArmory/blob/dev/cppForSwig/EncryptionUtils.h#L107

This is the one that pulls entropy from the system directly, the other RNG class is seeded from this.

2) This calls libbtc routines 'btc_random_init()' and 'btc_random_bytes()': https://github.com/goatpig/BitcoinArmory/blob/dev/cppForSwig/EncryptionUtils.cpp#L33

3) btc_random_bytes() default to btc_random_bytes_internal: https://github.com/libbtc/libbtc/blob/master/src/random.c#L46

4) btc_random_bytes_internal has OS dependant implementations:

4.a) on Windows, it uses the MS closed source CryptGenRandom (everybody has to do this on Windows): https://github.com/libbtc/libbtc/blob/master/src/random.c#L92
4.b) on Linux, it reads n bytes from /dev/urandom: https://github.com/libbtc/libbtc/blob/master/src/random.c#L103

goatpig

legendary

Activity: 3794

Merit: 1375

Armory Developer

Interesting question, I'll break this down into multiple posts for ease of read (I'll be linking to code in github):

Armory 0.96.5 (latest stable release) (TLDR; not affected)

This is still using CryptoPP for RNG, no libbtc involvement.

1) Wallets are created here: https://github.com/goatpig/BitcoinArmory/blob/master/ui/Wizards.py#L173

2) This goes to the PyBtcWallet: https://github.com/goatpig/BitcoinArmory/blob/master/armoryengine/PyBtcWallet.py#L840

3) `plainRootKey` is not set, so it defers to SecureBinaryData().generateRandom(32): https://github.com/goatpig/BitcoinArmory/blob/master/armoryengine/PyBtcWallet.py#L904

4) This is the generateRandom call: https://github.com/goatpig/BitcoinArmory/blob/master/cppForSwig/EncryptionUtils.cpp#L75

It uses 'BTC_PRNG prng;'

5) BTC_PRNG is define here: https://github.com/goatpig/BitcoinArmory/blob/master/cppForSwig/EncryptionUtils.h#L118

'#define BTC_PRNG CryptoPP::AutoSeededX917RNG'

arulbero

legendary

Activity: 1948

Merit: 2097

Are wallets created with Armory after 2016 actually affected by libbitcoin vulnerability ?

Quote from: Carlton Banks on August 13, 2023, 11:16:09 AM

sounds like I ought to check if Armory's use of libbitcoin could be affected. I didn't create any new Armory wallets since the date (late 2016) of the libbitcoin-system pull request, but possibly others did. Armory previously used Crypto++, which I guess was subject to a little more scrutiny (guessing isn't good enough however, I feel compelled now to check)

Topic: libbitcoin vulnerability and armory (Read 95 times)