Author

Topic: Lite Coin GUIMiner-scrypt alpha help (Read 1806 times)

newbie
Activity: 45
Merit: 0
April 16, 2013, 10:55:46 PM
#19
is cgminer pretty well always faster than reaper?  I just setup a rig with 4 7950s pulling 600 khash when overclocked 1500/1050
newbie
Activity: 54
Merit: 0
April 16, 2013, 06:50:48 PM
#18
Seems to have worked, thanks!
newbie
Activity: 25
Merit: 0
April 16, 2013, 05:20:33 PM
#17
Yes, use cgminer, it quadrupled my hashrate
newbie
Activity: 54
Merit: 0
April 16, 2013, 05:19:54 PM
#16
What intensity are you at?
newbie
Activity: 19
Merit: 0
April 16, 2013, 05:01:28 PM
#15
You could try using cgminer instead, he seem's more stable and faster than reaper. I got my 7950's running at 650khash/s with cgminer and thread concurrency of  20480.
newbie
Activity: 54
Merit: 0
April 16, 2013, 04:54:03 PM
#14
The computer knows the card is there, it just says that every time I try to use it with this program.
newbie
Activity: 54
Merit: 0
April 16, 2013, 04:36:58 PM
#13
I managed to get 3 working. But when I try the fourth, my screen flickers black and it says "display drivers stopped responding and has recovered" it's always the same card. Anyone know what is going on?
newbie
Activity: 54
Merit: 0
April 15, 2013, 09:50:24 PM
#12
Ok well I will give that a try. I have an extra 4GB in my other PC. Thanks.
member
Activity: 114
Merit: 10
April 15, 2013, 09:49:02 PM
#11
I have seen the suggested RAM amount for LTC frequently cited as 1.5 GB RAM for each memory card in the 7xxx series. It sounds like you may need another 2 GB RAM to optimize your performance.
newbie
Activity: 54
Merit: 0
April 15, 2013, 09:36:38 PM
#10
I have 4 GB of RAM
full member
Activity: 147
Merit: 100
April 15, 2013, 09:35:15 PM
#9
I was going to suggest that you need to increase system RAM as well.  I noticed that for LTC mining it generally works better when you have equal amounts of GPU memory and system RAM.  Not enough system RAM and the mining doesn't go well or at all.  Could be any number of things, but I might start there.  How much system RAM do you currently have?
newbie
Activity: 14
Merit: 0
April 15, 2013, 09:28:15 PM
#8
Care to try cgminer, I have had trouble with reaper myself?
newbie
Activity: 14
Merit: 0
April 15, 2013, 09:24:55 PM
#7
Hi,

I am not sure but what I do know is that the higher the thread concurrency the more ram memory it uses on your gpu, so you need to drop it so that you aren't using up the gpu's memory.

This thread might help:



Keiichicom.https://bitcointalksearch.org/topic/cant-use-a-thread-concurrency-beyond-4096-on-hd7850-176871
newbie
Activity: 54
Merit: 0
April 15, 2013, 09:23:25 PM
#6
Now I can't connect with any. Not sure what to do.
newbie
Activity: 54
Merit: 0
April 15, 2013, 09:14:02 PM
#5
Thanks, I'll try that, What should I lower the thread concurrency to?
newbie
Activity: 14
Merit: 0
April 15, 2013, 09:05:08 PM
#4
Hi,


Try dropping your thread concurrency; it might be too high, other settings look fine.  if this doesn't work drop your intensity until all gpu's connect. If this still doesn't work or it doesn't mine fast enough for you, then you could try cgminer instead, I found it a bit easier to tweak (although I admit I only have one gpu...)


Cheers, Keiichicom.
newbie
Activity: 54
Merit: 0
April 15, 2013, 08:50:28 PM
#3
Thread Concurency - 21712
work size 256
intensity 20
Vectors 1
GPU threads 1
newbie
Activity: 14
Merit: 0
April 15, 2013, 08:48:01 PM
#2
Hi,

Please post your current reaper parameters and I will look at them and advise...

Keiichicom
newbie
Activity: 54
Merit: 0
April 15, 2013, 08:43:36 PM
#1
Since I can't post in the alternative currencies section I am wondering if someone can post this there on my behalf.

I recently went from two GPU's to four GPU's on the same mining rig. I am running into a problem where only 2 of my workers are connecting at once. My computer does detect all four GPU's and I can use any combination of 2, but when I try to get the third and fourth one, it just says connection problems. I am doing reaper, I tried stratum but I can't get it to work. I must be doing something wrong, I just don't grasp the concept I guess. My OS is Windows 7. I have 4 7950's and a 1200w PS.

So I have my workers on 0-0 tahiti, 0-1 tahiti, 0-2 tahiti and 0-3 tahiti.

Any help is much appreciated.
Jump to: