Litle tweak for monitoring overclock/underclock T17 / S17

thierry4wd

sr. member

Activity: 446

Merit: 347

Hi , thanks Wink

with pleasure

I have updated the code, i find litle "bug" if fan is under 4000tr showing error, is not an error if you run in cold temp, i have set this at lower fan speed (1600tr)
i have change visual for better cleary

and i have optimised the calcul of hashrate, original is not "best" true .

NotFuzzyWarm

legendary

Activity: 3822

Merit: 2703

Evil beware: We have waffles!

Sweet.
While I have very few remaining Bitmain miners (most are Avalons), this is a perfect example of how the Antminer firmware hacks SHOULD be done: Do the hacks by distributing open source patch files! Pretty sure that the same can be done for setting Vcore, freq, fans, etc. Ya know - all the things that the closed source firmware hacks do.

This way the original cgminer/BMminer code is not distributed so there is no further violation of the cgminer GPL license beyond BM's violation of it..

thierry4wd

sr. member

Activity: 446

Merit: 347

Hi all, i have make (take on mp test firmware) litle tweak for monitoring value, and i have modified this for more compatibility and english ... this is util for validate your value (Voltage and Freq tuning)

You just need past this code on your miner at "www/pages/cgi-bin/miner_stats.html" and replace this. (Need SSH unlocked). https://pastebin.com/1a9xE7uG

Exemple : Monitoring in progress

Exemple : if you need more voltage !

Exemple : Test passed, your freq and voltage is ok Wink

This mod monitoring HW number, Fan speed, GH speed according to freq ... if is one is not on tolerence, showing error Wink

I thinks this mod is not bad for good tweak T17 ... i don't have tested on S17 but i thinks is working to ! (idealGH = frequency * 675 * asic_count * miner_count * 0.98 / 1000;)

With pleasure Wink

Topic: Litle tweak for monitoring overclock/underclock T17 / S17 (Read 218 times)