hey john, does this site have kudos??? Ill give some if so.
Thanks for recommending this new miner, I am still working out the kinks with keeping my card stable but I ended up going with "-v 2" for best performance on my card (5850)..
Ive been looking for a new pool, As I am a noob and found bitminter.. And from past experience I know the first thing I find is never the best! I think I found it with EMC US3!!
Anyways just letting you know i figured it out, And I reccomend you OC Afterburner and let this program mine..
Im running 875mhz core, 575 mem , 36 fan on a 5850 and its stable at 330mhps (afterburner settings)
CG settings:
Batch file with the following parameters:
-I 10 --vectors 2 --worksize 64
I will tweak this for best results later, need it stable overnight.
I will also have to try Trixx, Afterburner only lets me drop the mem clock to 575.. Thats after unlocking it from using factory.
Topic: Long Poll IO Error (Read 3419 times)
going with =
--gpu-engine 880 --gpu-memclock 350 --auto-fan --temp-target 81 -I 9
What does "-i 9" parameter control?
I dont think that list of -- stuff did anything... and I still dont know about vectors =(
The -i parameter controls the intensity of the mining speed. For maximum performance keep it at 10, but be warned that the computer would be laggy. --gpu-engine 880 --gpu-memclock 350 --auto-fan --temp-target 81 -I 9
What does "-i 9" parameter control?
I dont think that list of -- stuff did anything... and I still dont know about vectors =(
I used to overclock my 5850 to 875/300. My old cgminer.conf where I got almost 390 MH from it (I used Trixx to overclock):
Code:
"intensity" : "10,10",
"vectors" : "2,2",
"worksize" : "256,256",
"kernel" : "diablo,diablo",
"lookup-gap" : "0,0",
"thread-concurrency" : "0,0",
"shaders" : "0,0",
"gpu-engine" : "0-0,0-0",
"gpu-fan" : "0-95,0-95",
"gpu-memclock" : "0,0",
"gpu-memdiff" : "0,0",
"gpu-powertune" : "0,0",
"gpu-vddc" : "0.000,0.000",
"temp-cutoff" : "95,95",
"temp-overheat" : "85,85",
"temp-target" : "75,75",
"api-port" : "4028",
"expiry" : "120",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "2",
"log" : "5",
"queue" : "1",
"scan-time" : "60",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
going with =
--gpu-engine 880 --gpu-memclock 350 --auto-fan --temp-target 81 -I 9
What does "-i 9" parameter control?
I dont think that list of -- stuff did anything... and I still dont know about vectors =(
--gpu-engine 880 --gpu-memclock 350 --auto-fan --temp-target 81 -I 9
What does "-i 9" parameter control?
I dont think that list of -- stuff did anything... and I still dont know about vectors =(
When I was using GUIMiner I used the flags "-v" &"-w128" Because I have a 5850 card.. Are there any good flags to use for CGMiner?? I had my Mhp/s up to 340... it down to 260 without flags.
Thanks for the help, I could probably do alot more digging, but I figure I would ask here. /shame on me
Thanks for the help, I could probably do alot more digging, but I figure I would ask here. /shame on me
If you want PPS, go with mtred or ozcoin as both has low fees. (mtred 0%, ozcoin 3%).
If you want dgm, go with emc as its 0%.
If you want dgm, go with emc as its 0%.
please correct me, Because I know I am wrong.. But from what I see..
EMC charges 10%?
EMC charges 10%?
I went with EMC, since it has the highest hash rate
do you have a preference between mtred, ozcoin, EMC?
deepbits pool, I will try CGminer.. Thanks.
PS: You're getting shortcharged with the fees at Deepbit. Try other pools like MtRed, EMC, Ozcoin, etc that costs you way much less.
deepbits pool, I will try CGminer.. Thanks.
What pool? Also, try CGMiner instead.
It seems I get this error and everything stops working.. Until I press stop mining and start mining - the GUIminer resumes mining until I get the error again. I cant check GUIminer every 2 hours to make sure it is running.
Does anyone know of a flag that says OK to this error message.. or reconnects the program ever so often?
I use to get the error every 10min... Then I started using -v -w128 and it runs for about 2 hours until I get the error.. I am lost regarding what I should do, or what this error even means...
I have read other post talking about this error, but there program kept working.. My MHps goes to 0.0 when I get this error.
Thanks for any help.
Does anyone know of a flag that says OK to this error message.. or reconnects the program ever so often?
I use to get the error every 10min... Then I started using -v -w128 and it runs for about 2 hours until I get the error.. I am lost regarding what I should do, or what this error even means...
I have read other post talking about this error, but there program kept working.. My MHps goes to 0.0 when I get this error.
Thanks for any help.
Jump to: