i got 4 running at 90-95 right now chip temp.
Maybe 90 PCB temp
Topic: Looking to change the fan set up with my s9's (Read 186 times)
really?? I thought people said that these units shut down at 90c
85c is fine even 100c is normal
I know this has been brought up before, but I am not happy with the cooling on my s9's. It's a bit warmer here and two of my units run up to 85c
I am considering building an "exhaust box" and pulling from that box with this sort of fan:
https://www.amazon.com/dp/B00CAHM75W/ref=psdc_13399911_t3_B009LCEUEK
These fans pull high volume and pressure.
The issue is the PWM feedback to the antminers. If I disconnect the fans, the units will shut down. I suppose I could just cut the fins off the fans and let them spin there, but that draws an additional 150watts give or take.
I could try and connect a PWM generator and trick the units.
Does anyone have a hack for disconnecting the fans from these units? I just can't have them run this hot. They wont last
I am considering building an "exhaust box" and pulling from that box with this sort of fan:
https://www.amazon.com/dp/B00CAHM75W/ref=psdc_13399911_t3_B009LCEUEK
These fans pull high volume and pressure.
The issue is the PWM feedback to the antminers. If I disconnect the fans, the units will shut down. I suppose I could just cut the fins off the fans and let them spin there, but that draws an additional 150watts give or take.
I could try and connect a PWM generator and trick the units.
Does anyone have a hack for disconnecting the fans from these units? I just can't have them run this hot. They wont last
Jump to: