get an ip scanner now!
do you uses windows or mac.
you really need a scanner for mining I have had more then 30 miners hooked up ip scanners allow me to figure out issues with them much faster.
Topic: Lost access to Antminer S5+ (Read 742 times)
Reset was my best option, so i did it and it's now working as well.
Do a reset and you should be back where you started. If that fails use an IP scanner like http://www.advanced-ip-scanner.com and see if that finds it.
Rich
Rich
Actually i've made a changes to the Network settings to setup the IP : 192.168.1.99 to my miner but after saving the settings i couldn't connect to my miner anymore, so would anyone advice ?!!
A reset might help. I have not opened it up, but I doubt it uses an sd card. I have not tested it but I believe there is a reset button on controller, I would think it is similar to S5 reset.
I would put in a ticket though and get advice - https://bitmain.zendesk.com/hc/en-us/ . They are so new and so few owned by forum members we have not seen a lot of troubleshooting.
Actually i've made a changes to the Network settings to setup the IP : 192.168.1.99 to my miner but after saving the settings i couldn't connect to my miner anymore, so would anyone advice ?!!
Jump to: