Try to flash the miner using SD card.
I found whatsminer m3 documentation from their support/help page and they have some guides of creating SD card recovery.
I don't know what is the whatsminer m3 control board model name but it looks like an H3 control board if not ZYNQ control board.
Check this guide "Make SD card flasher/upgrader"
Check this for images/firmware: https://drive.google.com/drive/folders/12MQqtbh1jNu20zBdxWYra4OdddnxQGvw
You can also check the documentation to other lists of how to flash the miner but the only thing that I know will work is flashing the miner with SD card.
Topic: M3 Configuration (Read 207 times)
Thank you for your respond but I have to mention that I have already tried different types of smartphones, veriety of lap tops and computers, and different kind of internet. And yes I deleted all my Cache and my browser history. Basically I did everything you mentioned above even more than that, but still I couldn't get into the miner's configuration and tried like 100 times to reset the miner based on the manual, BUT no results.
I would be very happy if someone could have helped me through this.
and yesterday my other M3 miner did this error too. Jesus someone help me please.
I would be very happy if someone could have helped me through this.
and yesterday my other M3 miner did this error too. Jesus someone help me please.
Try other browser first or use incognito mode or try to clear browser history and cache and then access the IP again then login with root.
If it doesn't work keep trying to reset the miner check this guide below.
If it doesn't work keep trying to reset the miner check this guide below.
- Hold the reset button 3-5 seconds
- Wait for Green and Red light flickering
- Release the reset button and wait for 5 to 10 minutes to reboot.
Source: https://drive.google.com/file/d/1EzaTC7wIgcw2ardcMYXznyzMuWniNxsG/view
- Wait for Green and Red light flickering
- Release the reset button and wait for 5 to 10 minutes to reboot.
Source: https://drive.google.com/file/d/1EzaTC7wIgcw2ardcMYXznyzMuWniNxsG/view
Hello,
I recently bought a whatsminer M3 V2.2 . I set it to my pool and it started to mine very good until I shut it for 10 days. Then 2 days ago I turned it on, but I couldn't log into the ip address on my browser. When I was trying to log in the ip which I found from whatsminer tool in my browser, the default username and password root is not working. It says the username or password is wrong. Be certain that the miner was in my hands and no one eles's which could be able to change the password. And when I press the button in the back of the miner to reset it, the green and red lights flicker but no results. What can I do?
I recently bought a whatsminer M3 V2.2 . I set it to my pool and it started to mine very good until I shut it for 10 days. Then 2 days ago I turned it on, but I couldn't log into the ip address on my browser. When I was trying to log in the ip which I found from whatsminer tool in my browser, the default username and password root is not working. It says the username or password is wrong. Be certain that the miner was in my hands and no one eles's which could be able to change the password. And when I press the button in the back of the miner to reset it, the green and red lights flicker but no results. What can I do?
Jump to: