Memory and Clock settings question for rx 480 8gb.

Jdope

hero member

Activity: 747

Merit: 502

Quote from: Crystz on May 13, 2017, 06:46:50 PM

Hello I am fairly new to mining and gpus and am not sure if the settings I am currently using harm my GPUS.

I have 6 gpus and these are the settings: (mem/ cor/ mh/s)

gpu1: 2100/1150/27.81
gpu2: 1950/1150/26.21
gpu3: 2050/1200/26.29
gpu4: 1900/1100/25.53
gpu5: 2200/1218/29.06
gpu6: 2200/1218/29.07

Are any of these settings too high that it would harm the GPU?

These sound about right, it also depends on what the stock clock of your card was, my Rx 480 8gb had a stock memory clock of 2000 so if yours was the same then these numbers are great, watch out for heat though, with constant working heat is going to be the problem

Vann

hero member

Activity: 1036

Merit: 606

Those cloks are lower than the stock clocks on many cards so definetly not too high. What damages GPU's is excessive voltage and heat. Otherwise modern GPU's are pretty durable. Normaly the fans wear out before anything else.

Crystz

newbie

Activity: 14

Merit: 0

Hello I am fairly new to mining and gpus and am not sure if the settings I am currently using harm my GPUS.

I have 6 gpus and these are the settings: (mem/ cor/ mh/s)

gpu1: 2100/1150/27.81
gpu2: 1950/1150/26.21
gpu3: 2050/1200/26.29
gpu4: 1900/1100/25.53
gpu5: 2200/1218/29.06
gpu6: 2200/1218/29.07

Are any of these settings too high that it would harm the GPU?

Topic: Memory and Clock settings question for rx 480 8gb. (Read 310 times)