Tks man, the woods on side get heat, i tested then out box, no issues, 9hours working without restart, i'm working on a room with acoustic treatment and the correct ventilation.
The first one have one hashboard off, due the capacity of my eletric circuit, i have a 6mm/40A cable for them at the moment.
https://prnt.sc/olttzr
Topic: MicroBT MX3 V2 restarting. (Read 97 times)
Hello there! Is there any way to modify the restart temperature of M3?
MAN! it's reach 82 Cº and restart, im using wood boxes with ducts to keep it silent, since I live on a village.
But, when it reaches 82º and the fan keep 5k RPM, it restart, the manual saym it should only happen with 6k RPM and 85º.
But i'm away from these conditions. Help!
MAN! it's reach 82 Cº and restart, im using wood boxes with ducts to keep it silent, since I live on a village.
But, when it reaches 82º and the fan keep 5k RPM, it restart, the manual saym it should only happen with 6k RPM and 85º.
But i'm away from these conditions. Help!
sell it.
or cool it better.
have you gone on telegram and asked
https://telegram.me/PangolinMinerOfficial
Hello there! Is there any way to modify the restart temperature of M3?
MAN! it's reach 82 Cº and restart, im using wood boxes with ducts to keep it silent, since I live on a village.
But, when it reaches 82º and the fan keep 5k RPM, it restart, the manual saym it should only happen with 6k RPM and 85º.
But i'm away from these conditions. Help!
MAN! it's reach 82 Cº and restart, im using wood boxes with ducts to keep it silent, since I live on a village.
But, when it reaches 82º and the fan keep 5k RPM, it restart, the manual saym it should only happen with 6k RPM and 85º.
But i'm away from these conditions. Help!
Jump to: